how do ya sharpen?
-
@Cupboard said:
I started off the the Lansky, but have since moved to doing most of my sharpening on a really cheap four sided diamond block. It's really easy to use, and quick too. Much less fiddly and irritating than the Lansky.I bought it to sharpen the Mora I was given and have found I prefer using that for all my knives. Was only £10 too.
pics please??

-
@JBW1 said:
I watch a butcher while he is gutting/skinning our animals, and the way he explains using a steel is to act like you are shaving the steel or something? Then does it freakn quick.I use the Lansky and had always decent results. I'm no expert but regarding the butcher's way... I think it depends what you are going to do with the blade. For meat and foods and soft stuff in general i think a razor like edge has its place, but if you are going to cut thick cardboard, rope, carpet or heavy stuff, tha's another story... Then i maybe wrong so someone can correct me.

-
I started off the the Lansky, but have since moved to doing most of my sharpening on a really cheap four sided diamond block. It's really easy to use, and quick too. Much less fiddly and irritating than the Lansky.
I bought it to sharpen the Mora I was given and have found I prefer using that for all my knives. Was only £10 too.
pics please??


from here:
http://cpc.farnell.com/jsp/level5/module.jsp?moduleId=cpc/687438.xmlThey're almost always on special offer (but you have to know the special offer code) for about £10 all in.
They do ones not in a block which are a bit cheaper.
It's Rolson branded, but that doesn't really mean much. It's not exactly the best built thing in the world and one of the coarser grits isn't perfectly flat, but it's good enough to quickly and easily get all knives shaving sharp. -
Another vote for the spyderco triange sharpmaker
-
Hmm... Guess I should take a look at that Rolson stone. ☺
-
I’m not a sharpening Guru. I can’t get a razor edge from sticks, rods, stones, window glass, or coffee cups.
So I use a Chef’s Choice Model 120 followed by a few feather-light passes with an accusharp. I get hair-popping, razor-sharp edges in under in 2 minutes.
-
I sharpen most of my blades freehand ... I have a Lansky and a Spydie Sharpie as well.
I don´t get warm with the Lansky somehow. The Sharpie is good for a quick touch up.
But I use to sharpen them the way it is neccesary. If there´s a chipped blade, I use a coarse skythe stone, then go to a 320 Indiga stone (synthetic) - eventually some touch up with a 800 grit stone and for fine polishing a 3.200 Arkansas Oil Stone.
Then stroping the blades on a self made leather-strop. Compound or not, depends.But in case of an emergency a ceramic coffee mug and a leather belt work great for most sharping tasks.
If I can add, that most people use take to often their stones. I use the strop more often than my stones for some touch up. The stones just come to action when I don´t come any further with my strop. (And it was for free - expect a piece of pine wood and some leather)
Just my .02 Cent.
-
When finishing off with a leather strop, does it matter which way you pull the blade, ie, like when you sharpen
-
Thank you sir :D
-
I used to sharpen freehand, but I was not the greatest at it. Now I use a guide system, and even it is a bit fiddly, I get results I was unable to get before. No matter which method you are going to use, practice with cheap or old knives :)
Also, don't sharpen too often. Sharpening removes material. Once you have accomplished a good edge, touch it up with a strop every once in a while instead of sharpening all the time. -
Theres a couple of cheap home made strops in this thread ;)
</topic/20546
-
@microbe said:
I used to sharpen freehand, but I was not the greatest at it. Now I use a guide system, and even it is a bit fiddly, I get results I was unable to get before. No matter which method you are going to use, practice with cheap or old knives :)
Also, don't sharpen too often. Sharpening removes material. Once you have accomplished a good edge, touch it up with a strop every once in a while instead of sharpening all the time.That's good advise, its hard to not want to sharpen, but I don't want to end up with a tooth pick
-
Nothing fancy here. Smith angle guide system with coarse and medium diamond stones and a fine Arkansas stone. All my Leatherman blades are pretty soft and a few strokes with the medium diamond and 10-20 with the Arkansas is all it takes to touch up even a badly dulled blade.
The blades on my Wave, PST, and Fuse all respond well to a leather strop. Both for a quick touch up if not badly dulled, and as a final sharpening step.
-
sharpmaker is the best place to start IMHO
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login