The Hacked Leatherman Owners Club.
-
Nice!
That giant claw, sorry awl ;) looks massive!
I may have an envy thing. lol It came from a Surge, fits surprisingly well with very little filing/grinding!
Really? Looks like the Rebar awl.

-
Turned a co workers alx in to an AL. I had extra parts off an old blast. Hope he likes :D
-
@houstondiscdog said:
Good eye! Just checked and you're correct. My Rebar has 2 screwdrivers and the Surge still has an awl.
I was wondering about that too... the pivot area is larger on Surge tools, so that would have required some significant grinding to fit! ;)
-
@houstondiscdog said:
2 Waves...First is a BO, switched out the plier head and swapped the 420 plain edge for a BO in S30V.

Next is a stainless, swapped the serrated for a serrated with strap cutter and swapped out flat screwdriver for an awl.

Simple modifications, but I'm happy!
Smoooth, hiw did you blacken the S30V PE blade? I have a BO wave and I would like to do the same[emoji14]
-
@Lichtbote said:
Serrated blade upgrade ....... done.
Nice one buddy.

-
@houstondiscdog said:
2 Waves...First is a BO, switched out the plier head and swapped the 420 plain edge for a BO in S30V.

Next is a stainless, swapped the serrated for a serrated with strap cutter and swapped out flat screwdriver for an awl.

Simple modifications, but I'm happy!
Those Waves are looking great.

-
Pimped out Skulletool.
-
Sweet, a skulldriver. :D
-
@ducttapetech said:
Looks good!! Nicely done.Nate
Thanks Nate.
This lifts the "toolability" on a new level (at least for my way of MT use).
-
Serrated blade upgrade ....... done.

Nice one buddy.

Thanks, mate. :D
I wish i could find a matching BO saw as well.
-
Serrated blade upgrade ....... done.

Nice one buddy.

Thanks, mate. :D
I wish i could find a matching BO saw as well.
Do you think the Blade Exchanger would fit? Maybe ditch the opener and fit full length bosch blades?
-
@zoidberg said:
Do you think the Blade Exchanger would fit? Maybe ditch the opener and fit full length bosch blades?No, i don´t think it would fit. I just got my caliper and measured them, the thickness of the OHTs saw is 2,34 mm (pivot area), and the Surge blade exchanger has 3,6 mm (also measured the Gerber/Remgrit, it´s 4,68 mm). No fit, unless you make a complete new pivot post, and even then i´m afraid it will not work as smooth as now and the scales would be twisted from one end to the other.
Additional - it´s hard to get a BO Wave saw, i only can assume how much harder it might be to find a BO Surge blade exchanger.
If i would have a spare one, i definately would try to make it fit. :D A few days ago i was working on the electrics in my new workshop, installing the lines for the 3phase 400V system. I did that "on wall" using plastic tubes, and when i had to cut them to length i noticed i had lost my small metal-hacksaw somewhere between stuff. Instead of starting a long search i used the Surge on my belt - and the woodsaw blade worked for the thinwalled plastic tube, but not that great. Swapped it out with the metal blade from the sheath, and it worked like a charme. The exchanger is the best saw solution i know.
-
Do you think the Blade Exchanger would fit? Maybe ditch the opener and fit full length bosch blades?
No, i don´t think it would fit. I just got my caliper and measured them, the thickness of the OHTs saw is 2,34 mm (pivot area), and the Surge blade exchanger has 3,6 mm (also measured the Gerber/Remgrit, it´s 4,68 mm). No fit, unless you make a complete new pivot post, and even then i´m afraid it will not work as smooth as now and the scales would be twisted from one end to the other.
Additional - it´s hard to get a BO Wave saw, i only can assume how much harder it might be to find a BO Surge blade exchanger.
If i would have a spare one, i definately would try to make it fit. :D A few days ago i was working on the electrics in my new workshop, installing the lines for the 3phase 400V system. I did that "on wall" using plastic tubes, and when i had to cut them to length i noticed i had lost my small metal-hacksaw somewhere between stuff. Instead of starting a long search i used the Surge on my belt - and the woodsaw blade worked for the thinwalled plastic tube, but not that great. Swapped it out with the metal blade from the sheath, and it worked like a charme. The exchanger is the best saw solution i know.
What if you removed the extra spring to make the blade exchanger thinner?
-
[quote author=zoidberg link=topic=51510.msg963821#msg963821 date=1413280063]
Do you think the Blade Exchanger would fit? Maybe ditch the opener and fit full length bosch blades?No, i don´t think it would fit. I just got my caliper and measured them, the thickness of the OHTs saw is 2,34 mm (pivot area), and the Surge blade exchanger has 3,6 mm (also measured the Gerber/Remgrit, it´s 4,68 mm). No fit, unless you make a complete new pivot post, and even then i´m afraid it will not work as smooth as now and the scales would be twisted from one end to the other.
Additional - it´s hard to get a BO Wave saw, i only can assume how much harder it might be to find a BO Surge blade exchanger.
If i would have a spare one, i definately would try to make it fit. :D A few days ago i was working on the electrics in my new workshop, installing the lines for the 3phase 400V system. I did that "on wall" using plastic tubes, and when i had to cut them to length i noticed i had lost my small metal-hacksaw somewhere between stuff. Instead of starting a long search i used the Surge on my belt - and the woodsaw blade worked for the thinwalled plastic tube, but not that great. Swapped it out with the metal blade from the sheath, and it worked like a charme. The exchanger is the best saw solution i know.
I don't have a surge YET...... come on christmas :D but out of curiosity, would it be possible to replace one of the inside accessible tools with a saw off a blast, then keep the file on the exchanger?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login