Livarno, Romisen, C8, Small Sun cheap HID torches
-
-
I was worried....
OK, see you two next time

-
-
just more cheap rubbish :D
-
-
This will be a bit different as it will be a review(ish)/comparison between two torches.
I got this Cofly KX-D010 from [url=http://forum.multitool.org]multitool[/url] http://www.[url=http://forum.multitool.org]multitool[/url].com/led-flashlights/pp_20495.html

There is also the KX-D011 http://www.[url=http://forum.multitool.org]multitool[/url].com/led-flashlights/pp_6188.html which seems identical, apart from the D010 having a green rubber ring between the lens and the head.

I got it for less than $5, when it was on offer.
The reason was that I have the Jetbeam BA20 and like the general look of it.
The Cofly clearly imitates the Jetbeam (and its sister products, e.g. Klarus).The BA20 now costs around $30 but I have seen it cheaper. The Cofly costs around $8 to $10, so it is about 3 to 4 times cheaper,
Here is a shot with both torches.

Lets have a look at the Cofly
The bad...
It arrived with the rubber ring ring on the cap squeezed out.
This was because the ring is too big for the groove diameter... I just use it without it now.


The overall quality is OK, especially for a $5 torch. The anodising is similar to what we used to get from cheap Chinese torches 3 years (think 501B) ago and not up to the current standards of the cheap Chinese no brand torches.
It feels like a thin layer of paint. There was a small piece of the anodising missing (less than 1/2 a mm squared), which can be seen in some pictures.The Jetbeam is much older, not used a lot, but its anodising is as new and feels like a good quality finish.
The threads are not as smooth as the Jetbeam
The clip seems solid and can be rotated around or removed.
It has 3 modes - High, Low and Disco, selected by the rear push button.
The low has good PWM and is usable.By comparison the BA20 has two modes, selected by rotating the head, and instantaneous on, using the rear push button. It has current regulation for low. The low is very good for looking in cupboards or walking around the house in the dark, discreetly.
The Cofly uses an XP-E and the BA20 an XP-G (larger die, less throw)
The Cofly claims 220Lm and the BA20 270. They both seem to have similar brightness in the day, but the BA20 is noticeably brighter at night, so the Cofly does produce around 220Lm.
They both use 2AA batteries and can not be used with two LiIons, which is a shame
The Cofly weighs 61.7g and the BA20 76.5, without batteries. This is noticeable.
The BA20 feels heftier, and has a larger body.
The Cofly seems a bit too short for the 2AA batteries and you feel like you are damaging them when you close the cap, as you have to screw in with some force. The metal conduct on the cap will probably need to be shortened (filed down) by 1mm.
Cofly in pieces.

The reflector is a very mild OP. The BA20 has a standard OP reflecto and has a nice floody beam (also due to the larger die)

Some comparison shots:
Cofly on the right

High beam, Cofly beam on the right

Low




Overall, for the price, I am still not convinced.
For $5 or for even $10 it is not a bad light, though the rubber band shows little QC. However the BA20, especially if found around $25 (e.g. with coupons), is/feels like a much better torch. And, the Jetbeam has been around for some years now and has a solid reputation.If you want to buy a few, then go with the Cofly. If you will only buy one, to actually use regularly then it may be worth saving for the Jetbeam (which is really not that expensive). I use the BA20 as my bedside-intruder alert- check things at night- first option torch.
Now lets wait for the two readers's comments..
-
First reader, checking in. ;) Good review mate. I think I'll save my pennies for something else.
-
Thank you Gareth. It is not a bad light, but the BA20 is not that much either.
Enki?
-
Yes, I'm here. ;)
-
Good. We have 100%.
-
Classic Zoomies (apart from Maglite:) )
I got a new version of my UltraOK SK-68 type/style torch, by Ultrafire so I decided to do a comparison between the classic LED, Chinese cheap zoomies. (for more on the others see previous posts) There are really 3 main ones, the SK-68, the SA-22 and a newer no model one. Apart from the Sa-22 (see the beginning of this thread) they use AA or 14500 batteries. The SA-22 uses 18650 or 3AAAs. There are variations of the SK68 using 18650 too,
The UltraOK had the reputation of being the best quality SK68 at the time (2011ish) and the MXDL was THE Sa-22 to get.
So, the UltraOK still looks/feels like a better quality product.. there I said it.
Smoother, less sharp edges, better finish, less rattling, no squeezed rubber rings, smoother threads. (also no holes in the back of the body, at the ring)
(the Ultrafire cost less than $4.... in total)OK, picture time.
The Ultrafire is red, the UltraOK silver, the no-name black and the MXDL black and big.
The older ones use older emitters. The No-Name one is slimmer.

Apart from the MXDL they have the pill screwed into the body- good heat removal and they zoom by pulling the head in and out. The pill of the MXDL "floats" up and down and it zooms by rotating a ring on the head. No contact with the body, very little heat removal, but it has been used a lot more than the others with no problems. So the heat removal has not been an issue. In seconds the others get hot, the MXDL stays cool.





No anodising inside the UltraOK
and also tighter/better fit for the batteries (Sanyos)


Beams
On high, using good Li-Ions


SpotThe SK-68 were single mode (multimode ones available too)
The other two had low and disco modes.
Here you can see them in low mode.

Overall the no-name one was the least bright, on High.
http://www.[url=http://forum.multitool.org]multitool[/url].com/CREE-XPE-Q5-600-Lumen-7W-Zoomable-LED-Flashlight-1x14500-p-907006.htmlThe others were similar in brightness.
The ultrafire had a squeezed O-ring (story of the week,,) and the anodiisng was not as good as the UltraOK. It also had thinner metal and a weird outer beam...

less robust spring..

I assume the Ultrafire will have a longer running time, with its newer emitter.
In summation, they are all good. for under $4 you get proven designs, bright and with a zoom.
...especially the SK-68 has been around for donkeys, and seems to be really tough, Buy one, if you can spare $4. -
Sipik Clone Wars. :ahhh
:P
I keep looking at those but can't bring myself to buy one. I don't think they'd get any use. Pure power but no run times is all I see in them. And a REALLY bulky body.
I might be wrong though as they seem rather popular. ;) -
The multi mode ones will have longer runtimes. And they run on aa batteries, are tough and can be had for 3 dollars with discounts. The no name one is only slightly bigger than an aa battery. Again $3. And pretty colours.
-
Given that I already have the 1xAA/14500 zoomie covered with my Rominsen I can't quite ever see myself getting one, but there is no denying that they are great bang for the buck.


-
The Romisen is 4 times more expensive :ahhh
I nearly got the Romisen a few years back when I was going through a Romisen phase, but did not for some reason.Romisen are not talked about much lately and they do not seem to have made any new/different products in 3-4 years....In the day they were very popular. I still use most of the ones I got a few years ago.
-
3 cheap, fun, lasers
They all cost around $2-$3 and have about the same power, RED, laser. They all use button batteries and aluminium bodies.
The top one has a laser, UV light and LED light. They all work well but the UV light is not very powerful.
The middle one has a laser and a decent LED light.
The lower one has laser and alight that can either blink or cycle through various light colours.
The two lower ones also turn into pens. The silver one is also a tablet stylus!! :ahhh
(see the black rubber end) The blue pen one does not have very good threads, so if you keep going from pen to Laser mode it may not last long. This will also be an issue with the other one as you are screwing an aluminium body onto plastic, weaker threads, which will at some point get damaged.
The Stylus one, when in "pen mode" can produce a beautiful cycling spectrum of light, through the crystals it has on one end.

With cost not really being an issue here which one should you get?
The stylus one offers lots of function but no proper light (just flashing and changing. It is trendy and fun and feels solid.
The blue pen has a good light and is small. It also looks the most "normal". The quality of the threads is a worry.
The fat blue one offers a good light and a UV (money checking) light. If you do not need a pen it is a good tool to have on your keychain
**They all DRIVE CATS crazy!!!
Seriously buy all 3 - they are worth it.**

-
This is a great thread, dks! You are completely set for an apocalyptic version of flashlight tag!
-
...and at very low cost... :D
-
-
These are chargers/batteries/lights so I am putting this in two places.
Seeing that the sun always shines here and that I use a lot of USB chargers I thought it would be a good idea to buy a solar PowerBank, charge it in the sun and then use it to charge various devices for free. I also thought that these could be connected directly to a device and charge it like solar charger, without even the need to store the charge.
I decided to get these two 30000mAh panels, as the price to capacity ratio seemed good. They are available in many places and I got mine from [url=http://forum.multitool.org]multitool[/url], but [url=http://forum.multitool.org]multitool[/url] is actually 30% cheaper (I saw it later).I did not expect them to have 30000mAh but hoped for a decent capacity.
<u>These have 3 issues:</u>
The capacity is not bad and seems to be around 10000mAh on one and maybe 8000mah on the other, but it is not 30000mAh. It takes about 8-12 hours at about 1A to charge them fully and they can charge a 2000mAh phone battery a few times, verifying my estimates.
One of the indicator lights stopped working in one, but he rest still work.
The MAIN issue, however is that they are really useless as solar chargers, for themselves or for other devices. The solar panel is very small/weak (claimed 0.5W)and though it charges the battery it will take a few weeks to charge it fully (in bright sun). So, my idea of charging them during the day and using them at night was not practicable.
The device is capable of charging some devices with solar power, provided that they do not require a high current (less than 0.5 A).
I wrote a bad review about them but [url=http://forum.multitool.org]multitool[/url] does not publish bad reviews.<u>Good points:</u>
Used as just a powerbank they perform well. Once you charge them they will provide 1A or 2A and can charge two devices at the same time.
They feel solid (the screws on them are ornamental)
They both have a two brightness levels LED, which is bright and should last for months when they are fully charged.
I got a refund for the one and used it to get a proper,5W 1A solar panel that can charge them and other devices directly.Summarising, buy them as 10000mAh powerbanks that can charge at 1A and/or 2A and which in an emergency will be able to operate/charge some devices by using the sun and provide you with a long lasting light at night, from the charge they get from the sun




Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



