Why no Yeoman?
-
I like the idea of a second or for me backup blade. I have one on my GEC #78 but find that other then using it just cause I can there is not much need for it.
Monrogue what do you use the small secondary blade for so much? Opposed to just using your main blade for whatever task it is?
Despite actually quite liking the combo tool, I never did quite get along with the Yeoman I made for myself. Couldn't say why either, as it really appealed to my on paper.

On the other hand I really do like my Explorer. Nothing rational about this I suspect.

So you say you made yourself a Yeoman that you don't like?
Seems like maybe the thing to do is sell it cheap to some deserving person. Just saying.

Sorry buddy, IIRC it got re-made as a Scientist or something.

No worries mate. Just have to put Syph to work.
-
They were probably getting too many lawsuits from chaps who had busted their knuckles when the terrible nasty combo tool closed up when they were trying to actuate a screw.
-
You give it much thought. I know, it's the MTO, that's what we do here. But a Swisschamp is still 91 and just a little fatter and still lightweight and it fits a fist perfectly. It isn't much expensive either.
-
@HarleyXJGuy said:
Monrogue what do you use the small secondary blade for so much? Opposed to just using your main blade for whatever task it is?I use it for pretty much everything I need a knife for normally. That is usually cutting open packages, the tape sealing boxes closed, cutting the plastic sleeve type thing that houses packing slips on boxes...stuff like that. There's not much else I use a knife for really
The occasional food prep use, or anything larger that would require the main blade doesn't come up often, but I like having a nice, clean main blade for potential food needs, etc. This was one of my only gripes with the Compact last month-having to cut a bunch of tape to open boxes and getting the blade covered with adhesive gunk.If you had the awl that comes on the Pioneer (or Farmer) on your alox custom, that handles all of those above needs I mentioned just fine. It makes a great utility blade on its own really. However, to have that, you'd have to ditch the combo opener tool I believe, and have the dedicated opener layer. This only applies to the alox though. If you're still debating cellidor vs. alox, then that's another whole issue in itself ;) I believe that came up in another thread recently, where I and several others discussed this, yourself included I think

-
@kkokkolis said:
You give it much thought. I know, it's the MTO, that's what we do here. But a Swisschamp is still 91 and just a little fatter and still lightweight and it fits a fist perfectly. It isn't much expensive either.Dang enablers. Found a SC for just over $50 today and I am not doing well resisting it.
Monrogue what do you use the small secondary blade for so much? Opposed to just using your main blade for whatever task it is?
I use it for pretty much everything I need a knife for normally. That is usually cutting open packages, the tape sealing boxes closed, cutting the plastic sleeve type thing that houses packing slips on boxes...stuff like that. There's not much else I use a knife for really
The occasional food prep use, or anything larger that would require the main blade doesn't come up often, but I like having a nice, clean main blade for potential food needs, etc. This was one of my only gripes with the Compact last month-having to cut a bunch of tape to open boxes and getting the blade covered with adhesive gunk.If you had the awl that comes on the Pioneer (or Farmer) on your alox custom, that handles all of those above needs I mentioned just fine. It makes a great utility blade on its own really. However, to have that, you'd have to ditch the combo opener tool I believe, and have the dedicated opener layer. This only applies to the alox though. If you're still debating cellidor vs. alox, then that's another whole issue in itself ;) I believe that came up in another thread recently, where I and several others discussed this, yourself included I think

Didn't think about using the #2 blade for dirty jobs. Which is strange since I carry two Spydercos and one of them is pretty much dedicated to that while my Millie is the one I eat with.
-
I was once told that everyone should have a SC
i cant live without mine now 

-
Yeah, I should get one, one of these days.
-
One of these days he says.
I been doing some looking at can not seem to find a CT Lite for less then $100 but can't swing a dead cat without hitting a sub $60 SC.
Seems strange to me.
-
@HarleyXJGuy said:
One of these days he says.I been doing some looking at can not seem to find a CT Lite for less then $100 but can't swing a dead cat without hitting a sub $60 SC.
Seems strange to me.
CT Lite being sold right here on the forums for $60. Better be quick though ;)
-
@HarleyXJGuy said:
One of these days he says.I been doing some looking at can not seem to find a CT Lite for less then $100 but can't swing a dead cat without hitting a sub $60 SC.
Seems strange to me.
I really like my CT41. I did kinda owned a SC. It was a Super Timer. Which is a SC but has a watch in the scale.
-
One of these days he says.
I been doing some looking at can not seem to find a CT Lite for less then $100 but can't swing a dead cat without hitting a sub $60 SC.
Seems strange to me.
CT Lite being sold right here on the forums for $60. Better be quick though ;)
Thanks for finding this for me.
no funds atm though so will have to pass on it.
-
I carried my original Yeoman today down at the boat. The blade opened a pack of commercial grade carpet tiles and trimmed a bit of ply, the scissors dealt with a hang nail and a hard bit of skin, the Phillips drove a few screws on the hinges of the leaded glass door on the drinks cabinet, and the combo tool drove the small brass flat head screws that fixed the brass handle.
The biggest failing was the lack of awl for getting the screws started. Luckilly I had my Evowood 14 in another pocket ... although I should point out that while the Vics combo tool could drive those screws, there was nothing on the Wenger that was slim enough. The only other tool I had with an awl was the LM core which would have been a total fail, as thye holes would have been bigger than the thread diameter of the screws - Leatherman have never managed to make a decent awl IMHO
-
The Rand edition Yeomen is my fav......

OH YEAH!
Finally!
:D -
@50ft-trad said:
I carried my original Yeoman today down at the boat. The blade opened a pack of commercial grade carpet tiles and trimmed a bit of ply, the scissors dealt with a hang nail and a hard bit of skin, the Phillips drove a few screws on the hinges of the leaded glass door on the drinks cabinet, and the combo tool drove the small brass flat head screws that fixed the brass handle.The biggest failing was the lack of awl for getting the screws started. Luckilly I had my Evowood 14 in another pocket ... although I should point out that while the Vics combo tool could drive those screws, there was nothing on the Wenger that was slim enough. The only other tool I had with an awl was the LM core which would have been a total fail, as thye holes would have been bigger than the thread diameter of the screws - Leatherman have never managed to make a decent awl IMHO
So a explorer would of been better then Al ;)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
