And so it begins.... (My adventures into Alox!)
-
Someone wanted a dual blade BO setup with serrations so I got to do that config again. :D
He was ok with a non BO'd metal saw, but it does bug my OCD a tiny bit. :D I tried BOing a new style one and it didnt turn out, the old ones work fine though but arent as good of a file.





-
These BO tools with coloured alox scales make me think of sports cars with black alloy wheels. Not really my thing, but very nicely done. I still may commission something from Syph yet. The black scales with red liners and standard ss tools is

-
@Syph007 said:
I'll state for the record that I am not a big fan of G10 at all. Its ok, but to me its just reinforced plastic and plastic on knives well just isn't my thing. Which is why I love alox SAKs so much. Swapping nickel silver or brass liners for plastic to me is a downgrade, but this is a relatively easy way to get colored liners without having to anodize Aluminum ones.Now Ive had enough people ask me for G10 liners on alox mods over the last couple years that I finally caved and did a 3 color run of G10 liners for some people that wanted them and also as a curiosity and waterjet test of the material.

I was really curious about delamination of G10 as its a problem with some materials and waterjet. You can see here where the jet pierced the material the delamination was significant. Unfortunately that means I could not cut the holes and could only get the profiles done.



The orange liners I think would look pretty nice with HA black scales, so I do want to build one of those as a test. I imagine if I wet sand the edges and then wipe with acetone that should give the waterjet edges a smooth look.
So this was the biggest waste of money since I started modding. I dont like G10 at all, and I knew I didnt, but I had to go do it didnt I.

Since they are a loss overall as I think I paid $3 per cut, and I have no use for them, if anyone wants any you can have them cheap. Let me know if interested. I like metal liners and will stick to those.
-
Well at least now you know. Mistakes are the best way to learn.
-
Are they .40?
How do you line them up for holes? I've always predrilled mine and shaped using liner/spring. I think I have a set of ti that you may have cut along with birds head and I've been wanting to drill the drills but a bit intimidated and would hate to ruin them.Did you cut the birds head as well?
-
@rickinFL said:
Are they .40?
How do you line them up for holes? I've always predrilled mine and shaped using liner/spring. I think I have a set of ti that you may have cut along with birds head and I've been wanting to drill the drills but a bit intimidated and would hate to ruin them.Did you cut the birds head as well?
Yep they are 0.040". I only had these cut not the spacers for the blade tip.
Yes putting holes in liners are a pain! Here is how to do it though. Yout need to make what I would call a drilling jig board.
Use a stack of 3 or more stock liners as the template and clamp them to the fattest end first and use those as a guide to make the first hole.
Once you have a hole in that end, you put a dowel pin (or broken drill bit) through that hole and the templates and mount that on a board. Then you carefully drill 2 more holes in the board not the liners, to hold the liners overs the part to be drilled with just a tad of tenstion so they dont move. Then drill the last 2 holes.

-
Very cool system. Once again go above and beyond to help. As always, much appreciated sir.
I will be able to use broken bits. Not sure how they last you so long but 15 or so cuts is all I can manage before I hear that tear generating crack. I am sure there is far too much vibration in my press. Need to bolt that sucker down one of these days.
-
Ok here is a picture blast of today's work... :D





-
Another beauty syph!
JR -
This one has a whole pile of tools. :D







-
I'd say! Just swap out the pruner for the can opener, and the awl for a file and you got the Pharmber! Nice job! JR
-
@MadPlumbarian said:
I'd say! Just swap out the pruner for the can opener, and the awl for a file and you got the Pharmber! Nice job! JRThat would be a nice setup for sure! I would carry it!
-
I'd say! Just swap out the pruner for the can opener, and the awl for a file and you got the Pharmber! Nice job! JR
That would be a nice setup for sure! I would carry it!
It is, I carry it. Hey Syph remember this one? She's the best!! JR

-
I'd say! Just swap out the pruner for the can opener, and the awl for a file and you got the Pharmber! Nice job! JR
That would be a nice setup for sure! I would carry it!
It is, I carry it. Hey Syph remember this one? She's the best!! JR

Glad it's still going strong!
-
Gosh Syph007, I can look at pictures of your customs all day.
-
Great work on those Syph

-
Very nice work Syph...really like the pruner blade.
-
I just finnished reading all the posts ( took me 2 days ) ::)
Great work Syph!! Very beautifull SAK"s, I love them all!!
It was really interesting to see your progress and experimenting with different options, procceses and tools. Loved to see how you start doing more and more yourself.
Keep it up! You're a excellent craftsman!

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login




