And so it begins.... (My adventures into Alox!)
-
Are they .40?
How do you line them up for holes? I've always predrilled mine and shaped using liner/spring. I think I have a set of ti that you may have cut along with birds head and I've been wanting to drill the drills but a bit intimidated and would hate to ruin them.Did you cut the birds head as well?
-
@rickinFL said:
Are they .40?
How do you line them up for holes? I've always predrilled mine and shaped using liner/spring. I think I have a set of ti that you may have cut along with birds head and I've been wanting to drill the drills but a bit intimidated and would hate to ruin them.Did you cut the birds head as well?
Yep they are 0.040". I only had these cut not the spacers for the blade tip.
Yes putting holes in liners are a pain! Here is how to do it though. Yout need to make what I would call a drilling jig board.
Use a stack of 3 or more stock liners as the template and clamp them to the fattest end first and use those as a guide to make the first hole.
Once you have a hole in that end, you put a dowel pin (or broken drill bit) through that hole and the templates and mount that on a board. Then you carefully drill 2 more holes in the board not the liners, to hold the liners overs the part to be drilled with just a tad of tenstion so they dont move. Then drill the last 2 holes.

-
Very cool system. Once again go above and beyond to help. As always, much appreciated sir.
I will be able to use broken bits. Not sure how they last you so long but 15 or so cuts is all I can manage before I hear that tear generating crack. I am sure there is far too much vibration in my press. Need to bolt that sucker down one of these days.
-
Ok here is a picture blast of today's work... :D





-
Another beauty syph!
JR -
This one has a whole pile of tools. :D







-
I'd say! Just swap out the pruner for the can opener, and the awl for a file and you got the Pharmber! Nice job! JR
-
@MadPlumbarian said:
I'd say! Just swap out the pruner for the can opener, and the awl for a file and you got the Pharmber! Nice job! JRThat would be a nice setup for sure! I would carry it!
-
I'd say! Just swap out the pruner for the can opener, and the awl for a file and you got the Pharmber! Nice job! JR
That would be a nice setup for sure! I would carry it!
It is, I carry it. Hey Syph remember this one? She's the best!! JR

-
I'd say! Just swap out the pruner for the can opener, and the awl for a file and you got the Pharmber! Nice job! JR
That would be a nice setup for sure! I would carry it!
It is, I carry it. Hey Syph remember this one? She's the best!! JR

Glad it's still going strong!
-
Gosh Syph007, I can look at pictures of your customs all day.
-
Great work on those Syph

-
Very nice work Syph...really like the pruner blade.
-
I just finnished reading all the posts ( took me 2 days ) ::)
Great work Syph!! Very beautifull SAK"s, I love them all!!
It was really interesting to see your progress and experimenting with different options, procceses and tools. Loved to see how you start doing more and more yourself.
Keep it up! You're a excellent craftsman!

-
@J.G. said:
I just finnished reading all the posts ( took me 2 days ) ::)Great work Syph!! Very beautifull SAK"s, I love them all!!
It was really interesting to see your progress and experimenting with different options, procceses and tools. Loved to see how you start doing more and more yourself.
Keep it up! You're a excellent craftsman!

Whoa! Thats some dedication to read through 3 years of this topic. :D
I got some new alox mods coming next month to freshen things up a bit too, so keep reading.

-
I just finnished reading all the posts ( took me 2 days ) ::)
Great work Syph!! Very beautifull SAK"s, I love them all!!
It was really interesting to see your progress and experimenting with different options, procceses and tools. Loved to see how you start doing more and more yourself.
Keep it up! You're a excellent craftsman!

Whoa! Thats some dedication to read through 3 years of this topic. :D
I got some new alox mods coming next month to freshen things up a bit too, so keep reading.

Well, it has been read over 180'000 times so thats many people crawling through this goldmine.

-
I just finnished reading all the posts ( took me 2 days ) ::)
Great work Syph!! Very beautifull SAK"s, I love them all!!
It was really interesting to see your progress and experimenting with different options, procceses and tools. Loved to see how you start doing more and more yourself.
Keep it up! You're a excellent craftsman!

Whoa! Thats some dedication to read through 3 years of this topic. :D
I got some new alox mods coming next month to freshen things up a bit too, so keep reading.

As long as you keep making these awesome SAK's I'll keep reading.

Can't wait to see your next mod! -
Still waiting on Alox 91mm scales

-
@tattoosteve99 said:
Still waiting on Alox 91mm scales

I can only add
:D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login




