Surge questions
-
The New Surge does have the Awl and Replaceable 154CM wire cutters.
The Surge is worth the lower end asking price IMO. I first got the Old Surge and was not surprised how quickly this tool booted my Wave off my belt for work.
When I got the NEW SURGE it immediately booted the old one out.
Matt's has a video that really got me excited for one -
Things I like about the surge I'm using
The outside opening scissors. So far my favorite tool on the surge. You will never realize how handy they are until you edc one.
Large outside opening blades. They have replaced the one hand folding knife always carried. Having both fully serrated and plan edge blades I feel I can cut whatever I need to with it.
The saw holder is nice. Having the right tool for the job makes things easier. I carry a few different saw blades to cut different things.
Complete tool setup in one tool. It has it all
Things I don't like.
I'd like a Phillips but I do use the bit driver with a extension often.
The clip doesn't fit.
The blade steel could be better on BOTH blades. There 420hc is ok but I'd prefer something better.
It's huge and heavy. It tool awhile to get used to and it still feels like a brick in my pocket .
I'm going to post this. IL add some more thought later.
stupid work

-
Oh man that video may be the straw and stuff. It is buffering now.
@JAfromMn said:
The saw holder is nice. Having the right tool for the job makes things easier. I carry a few different saw blades to cut different things.You can buy different blade for the holder somewhere?
I'd like a Phillips but I do use the bit driver with a extension often.
Yeah Rebar/ST300 for the win. If the ST300 had outside opening stuff it would be an impossible decision.
The clip doesn't fit.
**Pocket carry this beast?! Maybe in like a Carhart jacket but not your jeans right? **
The blade steel could be better on BOTH blades. There 420hc is ok but I'd prefer something better.
No S30V blade you can buy like the Wave huh? Maybe just build a mini surge like Kamp?
It's huge and heavy. It tool awhile to get used to and it still feels like a brick in my pocket .
Pfft I got that problem already!

-
I believe Matt is a member here. If I am recalling correctly he lost his Surge then got a call and some one found it where he was working last.
Anyway, you can buy the saw blades anywhere the sell T shank blades.
I turn a fair amount of all types of screws and the LM bits haven't failed me yet.
I carry mine in a sheath and while the pocket clip "works" on the Surge its just to big to me to pocket carry.
I know many here are more knowledgeable than me on blade steels but the steel for most applications is fine. I cut anything from rubber to plastic and have found the blade to be more than adequate. I also routinely ( weekly ) use ceramic rods to touch it up as I do will all my blades.

-
Blade exchanger is a great idea.
Carrying all them blades in your front pocket not so much. How do you carry them around?
-
I carry some in the provided plastic sheath and the others ride in the nylon sheath the tool came with.
The blade exchanger puts this tool over the top especially when adding the LM bits to this tool. If you saw anything from wood to metal then this is the way to go.
-
The plastic sheath the extra blade came in holds a few of the thinner saw blades ok. Kam made a duct tape sheath iirc and posted a how to somewhere.

-
Mini-Surge wins! :D
I EDC a Surge set in my laptop case.
-
Yea, Surge is the tool I reach for if it is around.
It is a "Tool box", no kidding. -
@Kampfer said:
Some details about my Surge kit that I EDC in computer bag.
I use ST300 sheath to store the bit kits and Piranha, and all saw blades go into the tube came with PWII.
The main reason I don't EDC Surge anymore is that one needs to carry all the accessories to take FULL advantage of the mighty Surge.The Surge itself I am fine with it, just all the accessories are pain to EDC on person.
-
Add the LM bit extender and you open this tools capability even further.
The extender will accept 1/4 in bits if you require something other than the flat LM bits. It also allows me to use sockets and my ratcheting thing I made. Now sure the sockets combined with this tool aren't gonna break loose high torque fastened or rusted bolts but it's pretty good.
I can carry 9 most often used sockets and LM bits along with some 1/4 bits in a decently sized package. Tool box is an understatement.

-
The bit extender will take regular 1/4 bits? I did not know that.
I really got to stop putting off getting one and some bit cards.
-
@HarleyXJGuy said:
The bit extender will take regular 1/4 bits? I did not know that.I really got to stop putting off getting one and some bit cards.
Yes it does. I dont have one yet.
-
@HarleyXJGuy said:
The bit extender will take regular 1/4 bits? I did not know that.I really got to stop putting off getting one and some bit cards.
ALL STANDARD 1/4 HEX BITS

This one piece of kit really extends the LM line capacity that uses the bit driver. I never understand when folks say the flat LM bit are an issue when this extender solves the problem by accepting 1/4 bits.
-
Now I really need to get an extender so I can get some of them Whia #1 and #0 phillips bits for my daughters pile of toys.
Speaking of, it has been to long. Ollie photo bomb!

-
Aww happy girl.
I can't think of a better simple small accessory that has so much utility.
Got windows from the early to mid 1900's? Forgot where you put your window crank?
Pshhhh problem you say? HA! I got you covered, Leatherman has got you covered I should say.

-
Personally I do miss the mini bit ( eye glass bit ). Yeah I said it and no it's not solely because I wear glasses. It does come in handy for that as well and coming from Texas I'm sure you get a fair amount of sun so your sunglasses would benefit.
It's a tool that comes in handy for me in certain situations that other wise I'd need to go fetch the "right" tool, and frankly who wants to do that.
This is my Wave showing what I may use the mini bit for.

-
So i had to go look at my sunglasses because I was not sure if they even had screws i could adjust.
Turns out they do. Never in my life have I adjusted a screw on any kind of glasses but now that you brought this whole thing up I noticed one of the arms is looser then the other. Hmm.
-
@HarleyXJGuy said:
So i had to go look at my sunglasses because I was not sure if they even had screws i could adjust.Turns out they do. Never in my life have I adjusted a screw on any kind of glasses but now that you brought this whole thing up I noticed one of the arms is looser then the other. Hmm.
I've heard many people say they have never had to adjust their glasses. I rarely fold the arms in so they dont loosen over time but even still I've had to tighten them from time to time.
Anywhoo I like the mini bit and miss it on the New Surge. I carry a SAK with mini driver so alls not lost.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login