Surge questions
-
Yea, Surge is the tool I reach for if it is around.
It is a "Tool box", no kidding. -
@Kampfer said:
Some details about my Surge kit that I EDC in computer bag.
I use ST300 sheath to store the bit kits and Piranha, and all saw blades go into the tube came with PWII.
The main reason I don't EDC Surge anymore is that one needs to carry all the accessories to take FULL advantage of the mighty Surge.The Surge itself I am fine with it, just all the accessories are pain to EDC on person.
-
Add the LM bit extender and you open this tools capability even further.
The extender will accept 1/4 in bits if you require something other than the flat LM bits. It also allows me to use sockets and my ratcheting thing I made. Now sure the sockets combined with this tool aren't gonna break loose high torque fastened or rusted bolts but it's pretty good.
I can carry 9 most often used sockets and LM bits along with some 1/4 bits in a decently sized package. Tool box is an understatement.

-
The bit extender will take regular 1/4 bits? I did not know that.
I really got to stop putting off getting one and some bit cards.
-
@HarleyXJGuy said:
The bit extender will take regular 1/4 bits? I did not know that.I really got to stop putting off getting one and some bit cards.
Yes it does. I dont have one yet.
-
@HarleyXJGuy said:
The bit extender will take regular 1/4 bits? I did not know that.I really got to stop putting off getting one and some bit cards.
ALL STANDARD 1/4 HEX BITS

This one piece of kit really extends the LM line capacity that uses the bit driver. I never understand when folks say the flat LM bit are an issue when this extender solves the problem by accepting 1/4 bits.
-
Now I really need to get an extender so I can get some of them Whia #1 and #0 phillips bits for my daughters pile of toys.
Speaking of, it has been to long. Ollie photo bomb!

-
Aww happy girl.
I can't think of a better simple small accessory that has so much utility.
Got windows from the early to mid 1900's? Forgot where you put your window crank?
Pshhhh problem you say? HA! I got you covered, Leatherman has got you covered I should say.

-
Personally I do miss the mini bit ( eye glass bit ). Yeah I said it and no it's not solely because I wear glasses. It does come in handy for that as well and coming from Texas I'm sure you get a fair amount of sun so your sunglasses would benefit.
It's a tool that comes in handy for me in certain situations that other wise I'd need to go fetch the "right" tool, and frankly who wants to do that.
This is my Wave showing what I may use the mini bit for.

-
So i had to go look at my sunglasses because I was not sure if they even had screws i could adjust.
Turns out they do. Never in my life have I adjusted a screw on any kind of glasses but now that you brought this whole thing up I noticed one of the arms is looser then the other. Hmm.
-
@HarleyXJGuy said:
So i had to go look at my sunglasses because I was not sure if they even had screws i could adjust.Turns out they do. Never in my life have I adjusted a screw on any kind of glasses but now that you brought this whole thing up I noticed one of the arms is looser then the other. Hmm.
I've heard many people say they have never had to adjust their glasses. I rarely fold the arms in so they dont loosen over time but even still I've had to tighten them from time to time.
Anywhoo I like the mini bit and miss it on the New Surge. I carry a SAK with mini driver so alls not lost.
-
So i had to go look at my sunglasses because I was not sure if they even had screws i could adjust.
Turns out they do. Never in my life have I adjusted a screw on any kind of glasses but now that you brought this whole thing up I noticed one of the arms is looser then the other. Hmm.
I've heard many people say they have never had to adjust their glasses. I rarely fold the arms in so they dont loosen over time but even still I've had to tighten them from time to time.
Anywhoo I like the mini bit and miss it on the New Surge. I carry a SAK with mini driver so alls not lost.
I do the same thing if I need to carry a mini driver. I'm just not sure how a corkscrew sak will fit my friend in Afghanistan
-
One of my pet peeves is tools on my umm tools I don't use.
So yeah negative on a corky SAK. Now Pioneers and Syph customs are all fair game.

Still waiting for my OC Pioneer to show up.

-
@HarleyXJGuy said:
One of my pet peeves is tools on my umm tools I don't use.So yeah negative on a corky SAK. Now Pioneers and Syph customs are all fair game.

Still waiting for my OC Pioneer to show up.

But if the corkscrew has a mini driver in it, it's essentially just a holder at that point. That makes it better for in my mind, at least

-
@Aloha007 said:
Personally I do miss the mini bit ( eye glass bit ). Yeah I said it and no it's not solely because I wear glasses. It does come in handy for that as well and coming from Texas I'm sure you get a fair amount of sun so your sunglasses would benefit.It's a tool that comes in handy for me in certain situations that other wise I'd need to go fetch the "right" tool, and frankly who wants to do that.
This is my Wave showing what I may use the mini bit for.
Same, and I missed it so much, that I modded my Surge.

-
I've poked with it, very lightly pried, and of course used it as its intended. I understand what others have said but for me I like it.
Your Surge is AWESOME.


-
Surge is awesome.
You can use the mini bit driver by pinching it between the locking bar on the outside of the tool. There's a thread here about it somewhere with pics. You can do this on the Wave/Charge too. I just carry the small bit in the top of the bit card in case I need it.
As for adjusting screws on my glasses, as soon as I see/feel them getting loose, I drop a bit of loctite in the thread and tighten it down. Never had to do it more than once.
Also, PM incoming HarleyXJGuy.
-
@Toolslinger said:
Surge is awesome.You can use the mini bit driver by pinching it between the locking bar on the outside of the tool. There's a thread here about it somewhere with pics. You can do this on the Wave/Charge too. I just carry the small bit in the top of the bit card in case I need it.
As for adjusting screws on my glasses, as soon as I see/feel them getting loose, I drop a bit of loctite in the thread and tighten it down. Never had to do it more than once.
Also, PM incoming HarleyXJGuy.
-
Surge is awesome.
You can use the mini bit driver by pinching it between the locking bar on the outside of the tool. There's a thread here about it somewhere with pics. You can do this on the Wave/Charge too. I just carry the small bit in the top of the bit card in case I need it.
As for adjusting screws on my glasses, as soon as I see/feel them getting loose, I drop a bit of loctite in the thread and tighten it down. Never had to do it more than once.
Also, PM incoming HarleyXJGuy.
That's the one. Thanks, Kampfer.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login