'Les Stroud' Engage Multitool TEST TO DESTRUCTION!
-
Great thread you still need to do the 54R steel core ammo test. ;-)
Mike
Sent from my iPhone using Tapatalk
-
Mike 56: Thank you for your generous offer to send me a Mosin Nagant and steel core ammo. I gladly accept. PM me for the location of my FFL. :D
I actually have some friends with Mosins. Maybe I'll look into it.
Anyhoo...
I decided to test the Engage (and pal, Sidekick) by filing my nails.


Get it? Get it? See what I did there? I'm so clever.
This is the result of ten seconds of filing with both tools and as much pressure as I could muster. I didn't see any great difference between the double-cut file on the flathead driver and the file on the fish scaler with the Engage. Each removed very little material. The fish scaler at least allowed longer strokes. I have to say, I didn't notice a lot of wearing on the files.
In contrast, even the shorter-than-normal broken file on the Sidekick ate through the nail head pretty convincingly.
Next, testing the files on a softer metal, an altoids tin...

The Engage's file, while it' a bit hard to see, bit pretty deep after ten strokes with heavy pressure.
And the Sidekick...

Because of the wide and stumpy file, the work area was spread out, but not bad results. I used the same 10 strokes with equal pressure, as the Engage. No clear winner here.
Not much else to report with this one.
Ideas for more torture are always appreciated!
Engage for filing soft metal: Pass
Engage for filing iron/steel types of metal: FailAbout what I predicted.
-
@Lynn LeFey said:
I actually have some friends with Mosins. Maybe I'll look into it.That would be a great opportunity to improve your video skills

-
The new iPhone 6's have like 240fps video. That might be neat to see in super slow mo. >:D
I'll see if any of my friends have a iPhone 6.
-
@Lynn LeFey said:
The new iPhone 6's have like 240fps video. That might be neat to see in super slow mo. >:DI'll see if any of my friends have a iPhone 6.
+1 that would be very cool
-
Jeez, you leave this thread alone for a few days and then it takes you close to an hour to go through all the posts...
Lynn, great review/torture-test. For what it's worth, I'm once again considering if I should buy a Sidekick/Wingman. After trying quality tools, all at a reasonable price, I really can't figure out why anyone would buy either cheap multitools or multitools produced by companies/figures, that you normally wouldn't associate with tools.
-
@Freaver said:
Jeez, you leave this thread alone for a few days and then it takes you close to an hour to go through all the posts...Lynn, great review/torture-test. For what it's worth, I'm once again considering if I should buy a Sidekick/Wingman. After trying quality tools, all at a reasonable price, I really can't figure out why anyone would buy either cheap multitools or multitools produced by companies/figures, that you normally wouldn't associate with tools.
I liked the Wingman, the plier head and tools are okay.
However I found the handles uncomfortable.
For me it was a game killer. YMMV. -
@Freaver said:
For what it's worth, I'm once again considering if I should buy a Sidekick/Wingman.This is me being 100% honest. If you don't need the pocket clip, OHO blade, and can afford a little extra, get the Rebar. It's an overall better tool.
@Freaver said:
After trying quality tools, all at a reasonable price, I really can't figure out why anyone would buy either cheap multitools or multitools produced by companies/figures, that you normally wouldn't associate with tools.Cheapos... If you tend to lose tools, this isn't an entirely terrible option. Otherwise, not. However, I think the big reason people get cheapos is that they just don't know any better about the quality.
MTs from other companies... I'm looking RIGHT AT YOU, Camillus!! In this particular case, and one of the reasons this tool makes me so angry is that it really does seem to be a cheap $10 tool, with $5 worth of extra goodies, that a major knife maker is pushing. It's like they're selling out their reputation to get a few fast bucks. I mean, I'll be honest in saying that I don't know how good/bad Camillus' reputation IS these days, but 'degrading' would be my guess.
-
@Lynn LeFey said:
@Freaver said:
For what it's worth, I'm once again considering if I should buy a Sidekick/Wingman.This is me being 100% honest. If you don't need the pocket clip, OHO blade, and can afford a little extra, get the Rebar. It's an overall better tool.
Well, OHO blade isn't exactly a must-have, although I really like having it on my Suspension. The problem with the Rebar, from my perspective, is the inside opening tools. I really like the box-design it's got, but having to open the pliers every time I need a blade or a driver, would just be a major pain in the butt...
@Lynn Lefey said:
After trying quality tools, all at a reasonable price, I really can't figure out why anyone would buy either cheap multitools or multitools produced by companies/figures, that you normally wouldn't associate with tools.
Cheapos... If you tend to lose tools, this isn't an entirely terrible option. Otherwise, not. However, I think the big reason people get cheapos is that they just don't know any better about the quality.
MTs from other companies... I'm looking RIGHT AT YOU, Camillus!! In this particular case, and one of the reasons this tool makes me so angry is that it really does seem to be a cheap $10 tool, with $5 worth of extra goodies, that a major knife maker is pushing. It's like they're selling out their reputation to get a few fast bucks. I mean, I'll be honest in saying that I don't know how good/bad Camillus' reputation IS these days, but 'degrading' would be my guess.
I've actually never heard of Camillus, before they started making this horrendous thing. Has there actually been any examples of a knifemaker making a proper multitool?
@zoidberg said:
I liked the Wingman, the plier head and tools are okay.
However I found the handles uncomfortable.
For me it was a game killer. YMMV.I might have to fondle one, before buying. Or see if I can find a cheap one on the bay...
-
Drive over it on the tar with a truck
-
@Freaver said:
Has there actually been any examples of a knifemaker making a proper multitool?SOG does. Though, funny enough, the knives on their MTs aren't anything special. Their big thing is compound leverage plier heads.
Dem
I would say that SOG used to ;) Their products seem to have suffered a decline over recent times
-
@Freaver said:
I've actually never heard of Camillus, before they started making this horrendous thing. Has there actually been any examples of a knifemaker making a proper multitool?Camillus made the U.S. Army Pocket Knife. Essentially the U.S. Version of the Soldier Swiss Army Knife.
But that was the 'old' Camillus, before the company went bankrupt and was bought out.On to other issues.
Comparables.
I figured I'd do some comparisons with other tools, both in terms of cost, intended function, and actual function.
So. First, cost. I think the Sidekick comparison I've been doing has been very fair as far as tools in the same ballpark for cost, so I won't harp on that for long.
Second, intended function. As a 'survival kit' I think the real competitor is the Gerber Bear Grylls Ultimate Tool Pack. here's a link to 50ft-trad's review of the kit.
</topic/38925That kit costs $50. The Engage costs a tad over $25. So... almost twice as much for the Bear Grylls kit. And you know where every cent of that extra money is going. Fiddling with it today was like getting the most awesome MT ever, after dealing with the Engage. Smaller, lighter, vastly more precise, locking tools, razor sharp blade right out of the package. All the tools work as they're supposed to. The flashlights in both are the same brightness, but the package for the Bear Grylls tool says the light (a AAA model) will run for 14 hours. I am quite certain the one with the Engage will NOT. It runs on 4 tiny watch batteries. Firesteels are VERY close on this. The Bear Grylls one is longer, so maybe easier to throw sparks, but both are very good. While I don't have much against the sheath of the Engage, the Bear Grylls toolset's sheath is really nice, hard plastic and rubber.
Maybe that's not a fair comparison though. So, lets find a tool that is close to a functional equivalent. I'm picking the Walmart Ozark Trail MT. Here's my review.
</topic/44471I pulled it out to test some of the stuff I've done with the Engage, and it seems to perform as well or better every time. That's a $10 tool, and i've noted above that the other add-ons, light and firesteel, should be another $10 to get. That'd then be $5 cheaper than the Engage.
Just some thoughts.
-
Camillus old slipjoint knives are still sought after by folks who are into umm, old slipjoints. I have a couple that are every bit of 50 years old and still going strong.
No idea about new products. Honestly didn't know they was still around.
-
Camillus was an old USA brand of the same quality and was renowned as much as buck and kabar.
Then they went under and we're shipped to China. Just like Schrade and Marbles but Schrade built back to quality and Marbles builds all there old products to the old spec. Unlike the others though Camillus seams to have very low quality standards and try to be forward thinking to the tactical crowd. To the cost of quality and function. -
@Noa Isumi said:
Camillus was an old USA brand of the same quality and was renowned as much as buck and kabar.
Then they went under and we're shipped to China. Just like Schrade and Marbles but Schrade built back to quality and Marbles builds all there old products to the old spec. Unlike the others though Camillus seams to have very low quality standards and try to be forward thinking to the tactical crowd. To the cost of quality and function.I think this sums it up nicely.
-
One of my favorite knives is a US-made Camillus TL-29. It's built like a tank, takes a great edge, and is just an all-around solid bit of kit. The Bear Grylls tool in the kit Lynn mentions is basically a Strata in different clothes. I'm a fan of the Strata. I think it's a very underrated tool, and I've used mine pretty hard with no issues whatsoever.
-
Just thought I'd drop a note here to say that there might not be a lot going on for the next 4 or 5 days in this thread, since it's Thanksgiving weekend.
Second thing, I googled the Camillus Les Stroud multi tool, and there is only ONE review of it I can find. Mine.
And there's only one video about it on youtube. This one. The tool also apparently goes by 'Crusade'.
https://www.youtube.com/watch?v=V2htrJ0R6fw -
Another test.
What happens when you drive a Hundai Santa Fe over the Engage, and his pal the Sidekick?
Description of results to follow...
EDIT: Also, yay! my first video of the thread! You can see the tools run over in live action!
EDIT AGAIN!: So much for the 'no posts over the weekend' thing, huh? -
And the damage?

Essentially nothing to either tool.
The Engage: The screw holding the blade, driver, can opener (and where the scissors used to be) loosened up a little. The tools were floppy, but that screw seems to loosen up if you sneeze at it. There are a few more scuffs on the handle scales.
The Sidekick: I put the tool belt-clip down when it was run over. I figured this would be worst-case, with all the weight on the clip. Nothing. Maybe a VERY slight bend inward of the clip, so minor I might be imagining it. No scuffs on the metal. I can't feel any damage to the protruding screw heads. Nothing.
Engage 'accidentally' being left in the driveway. PASS
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login