'Les Stroud' Engage Multitool TEST TO DESTRUCTION!
-
@Freaver said:
For what it's worth, I'm once again considering if I should buy a Sidekick/Wingman.This is me being 100% honest. If you don't need the pocket clip, OHO blade, and can afford a little extra, get the Rebar. It's an overall better tool.
@Freaver said:
After trying quality tools, all at a reasonable price, I really can't figure out why anyone would buy either cheap multitools or multitools produced by companies/figures, that you normally wouldn't associate with tools.Cheapos... If you tend to lose tools, this isn't an entirely terrible option. Otherwise, not. However, I think the big reason people get cheapos is that they just don't know any better about the quality.
MTs from other companies... I'm looking RIGHT AT YOU, Camillus!! In this particular case, and one of the reasons this tool makes me so angry is that it really does seem to be a cheap $10 tool, with $5 worth of extra goodies, that a major knife maker is pushing. It's like they're selling out their reputation to get a few fast bucks. I mean, I'll be honest in saying that I don't know how good/bad Camillus' reputation IS these days, but 'degrading' would be my guess.
-
@Lynn LeFey said:
@Freaver said:
For what it's worth, I'm once again considering if I should buy a Sidekick/Wingman.This is me being 100% honest. If you don't need the pocket clip, OHO blade, and can afford a little extra, get the Rebar. It's an overall better tool.
Well, OHO blade isn't exactly a must-have, although I really like having it on my Suspension. The problem with the Rebar, from my perspective, is the inside opening tools. I really like the box-design it's got, but having to open the pliers every time I need a blade or a driver, would just be a major pain in the butt...
@Lynn Lefey said:
After trying quality tools, all at a reasonable price, I really can't figure out why anyone would buy either cheap multitools or multitools produced by companies/figures, that you normally wouldn't associate with tools.
Cheapos... If you tend to lose tools, this isn't an entirely terrible option. Otherwise, not. However, I think the big reason people get cheapos is that they just don't know any better about the quality.
MTs from other companies... I'm looking RIGHT AT YOU, Camillus!! In this particular case, and one of the reasons this tool makes me so angry is that it really does seem to be a cheap $10 tool, with $5 worth of extra goodies, that a major knife maker is pushing. It's like they're selling out their reputation to get a few fast bucks. I mean, I'll be honest in saying that I don't know how good/bad Camillus' reputation IS these days, but 'degrading' would be my guess.
I've actually never heard of Camillus, before they started making this horrendous thing. Has there actually been any examples of a knifemaker making a proper multitool?
@zoidberg said:
I liked the Wingman, the plier head and tools are okay.
However I found the handles uncomfortable.
For me it was a game killer. YMMV.I might have to fondle one, before buying. Or see if I can find a cheap one on the bay...
-
Drive over it on the tar with a truck
-
@Freaver said:
Has there actually been any examples of a knifemaker making a proper multitool?SOG does. Though, funny enough, the knives on their MTs aren't anything special. Their big thing is compound leverage plier heads.
Dem
I would say that SOG used to ;) Their products seem to have suffered a decline over recent times
-
@Freaver said:
I've actually never heard of Camillus, before they started making this horrendous thing. Has there actually been any examples of a knifemaker making a proper multitool?Camillus made the U.S. Army Pocket Knife. Essentially the U.S. Version of the Soldier Swiss Army Knife.
But that was the 'old' Camillus, before the company went bankrupt and was bought out.On to other issues.
Comparables.
I figured I'd do some comparisons with other tools, both in terms of cost, intended function, and actual function.
So. First, cost. I think the Sidekick comparison I've been doing has been very fair as far as tools in the same ballpark for cost, so I won't harp on that for long.
Second, intended function. As a 'survival kit' I think the real competitor is the Gerber Bear Grylls Ultimate Tool Pack. here's a link to 50ft-trad's review of the kit.
</topic/38925That kit costs $50. The Engage costs a tad over $25. So... almost twice as much for the Bear Grylls kit. And you know where every cent of that extra money is going. Fiddling with it today was like getting the most awesome MT ever, after dealing with the Engage. Smaller, lighter, vastly more precise, locking tools, razor sharp blade right out of the package. All the tools work as they're supposed to. The flashlights in both are the same brightness, but the package for the Bear Grylls tool says the light (a AAA model) will run for 14 hours. I am quite certain the one with the Engage will NOT. It runs on 4 tiny watch batteries. Firesteels are VERY close on this. The Bear Grylls one is longer, so maybe easier to throw sparks, but both are very good. While I don't have much against the sheath of the Engage, the Bear Grylls toolset's sheath is really nice, hard plastic and rubber.
Maybe that's not a fair comparison though. So, lets find a tool that is close to a functional equivalent. I'm picking the Walmart Ozark Trail MT. Here's my review.
</topic/44471I pulled it out to test some of the stuff I've done with the Engage, and it seems to perform as well or better every time. That's a $10 tool, and i've noted above that the other add-ons, light and firesteel, should be another $10 to get. That'd then be $5 cheaper than the Engage.
Just some thoughts.
-
Camillus old slipjoint knives are still sought after by folks who are into umm, old slipjoints. I have a couple that are every bit of 50 years old and still going strong.
No idea about new products. Honestly didn't know they was still around.
-
Camillus was an old USA brand of the same quality and was renowned as much as buck and kabar.
Then they went under and we're shipped to China. Just like Schrade and Marbles but Schrade built back to quality and Marbles builds all there old products to the old spec. Unlike the others though Camillus seams to have very low quality standards and try to be forward thinking to the tactical crowd. To the cost of quality and function. -
@Noa Isumi said:
Camillus was an old USA brand of the same quality and was renowned as much as buck and kabar.
Then they went under and we're shipped to China. Just like Schrade and Marbles but Schrade built back to quality and Marbles builds all there old products to the old spec. Unlike the others though Camillus seams to have very low quality standards and try to be forward thinking to the tactical crowd. To the cost of quality and function.I think this sums it up nicely.
-
One of my favorite knives is a US-made Camillus TL-29. It's built like a tank, takes a great edge, and is just an all-around solid bit of kit. The Bear Grylls tool in the kit Lynn mentions is basically a Strata in different clothes. I'm a fan of the Strata. I think it's a very underrated tool, and I've used mine pretty hard with no issues whatsoever.
-
Just thought I'd drop a note here to say that there might not be a lot going on for the next 4 or 5 days in this thread, since it's Thanksgiving weekend.
Second thing, I googled the Camillus Les Stroud multi tool, and there is only ONE review of it I can find. Mine.
And there's only one video about it on youtube. This one. The tool also apparently goes by 'Crusade'.
https://www.youtube.com/watch?v=V2htrJ0R6fw -
Another test.
What happens when you drive a Hundai Santa Fe over the Engage, and his pal the Sidekick?
Description of results to follow...
EDIT: Also, yay! my first video of the thread! You can see the tools run over in live action!
EDIT AGAIN!: So much for the 'no posts over the weekend' thing, huh? -
And the damage?

Essentially nothing to either tool.
The Engage: The screw holding the blade, driver, can opener (and where the scissors used to be) loosened up a little. The tools were floppy, but that screw seems to loosen up if you sneeze at it. There are a few more scuffs on the handle scales.
The Sidekick: I put the tool belt-clip down when it was run over. I figured this would be worst-case, with all the weight on the clip. Nothing. Maybe a VERY slight bend inward of the clip, so minor I might be imagining it. No scuffs on the metal. I can't feel any damage to the protruding screw heads. Nothing.
Engage 'accidentally' being left in the driveway. PASS
-
I tried to break an Asus EEE once by running it over with one of our JCB telehandlers in our yard. That didn't do very much either. You'd have thought that 10t of machine (OK so spread out over 4 wheels) would have made more noticeable damage than it did.
-
Yeah, it was a really unimpressive test, but it SOUNDED like a great idea at the time.

I also thought i'd note that the big gash in the yellow part of the lefthand scale in the pic above isn't even from being run over. It's from the screwdriver I used to pry out the bent pin of the plier head earlier.
-
How's this?

I have been increasingly impressed with what the Sidekick can handle, but I know it is a 'budget tool'. It's a REALLY GOOD budget tool, but some of the shortcuts, like no locking tools, 2d philips, and anvil style wire cutters, really become obvious when you switch up to the Rebar.
Then again... I always miss the pocket clip and OHO blade when i go from the Sidekick to Rebar.
-
@Lynn LeFey said:
How's this?
I have been increasingly impressed with what the Sidekick can handle, but I know it is a 'budget tool'. It's a REALLY GOOD budget tool, but some of the shortcuts, like no locking tools, 2d philips, and anvil style wire cutters, really become obvious when you switch up to the Rebar.
Then again... I always miss the pocket clip and OHO blade when i go from the Sidekick to Rebar.
Hmm some of the things you point out as budget issues have me interested in the Sidekick. Non locking tools are easy to deploy and redeploy for light jobs plus it has the OHO blade and pocket clip. Prolly some weight savings too?
Off to LMs website.
-
The Sidekick and Rebar are essentially dead even in weight. About 6.7oz each.
-
@Lynn LeFey said:
The Sidekick and Rebar are essentially dead even in weight. About 6.7oz each.Yeah and only an ounce or so lighter then the Wave. So umm no Side/Wing action in this guys future. If I want OHO I will go with my trusty Wave and of not well you know the answer to the 7 oz question already.
Hint it is Little Boy.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login