Vasoline
-
I have read many times that Vasoline (petroleum jelly) isn't good to use as a sealant/lubricant for flashlights because it deteriorates the rubber o rings. Is that true, or is it just another myth?
I've done it with my Mag Lights when working over the years and have never had a problem with deteriorated o rings, but then just because it hasn't happened to me doesn't mean that it won't happen.
Def
-
@Defender said:
I have read many times that Vasoline (petroleum jelly) isn't good to use as a sealant/lubricant for flashlights because it deteriorates the rubber o rings. Is that true, or is it just another myth?I've done it with my Mag Lights when working over the years and have never had a problem with deteriorated o rings, but then just because it hasn't happened to me doesn't mean that it won't happen.
Def
Have a look here def http://www.maglite.com/pdf/CustServ/D_BEC_6_041112004509502.pdf
It says " MAINTENANCE - Place a small amount of petroleum jelly on all threads and O rings every 6 months "
But Surefire and other torch ( flashlight ) companys state that you must not use petroleum jelly and use sillicon grease instead . I have used Vasoline on my mags but when I had my Surefires I got a tube of Sillicon and now use that .Dunc
-
I wonder if that means Mag is using different kinds of o rings? Or maybe SureFire and other manufacturers want folks to use a more "tactical" ;ubricant to make their products seem more advanced?
As Kelly Bundy used to say, "The mind wobbles."

Def
-
If I remember correctly Surefire wants you to use a different lubricant because vasoline, 3-in-1, and so forth actually inhibit the conductivity of the light. Keep in mind that some Surefire lights are pulling more than 2 amps per their voltage and when you reach this high of current you need all the help you can get to ensure brightness and runtime are up to par.
I use Nyogel from light hound and have no complaints with it. Prior to this I used motor oil and never really noticed a difference in brightness/runtime after the switch.
You may want to do a search on the ol' candlepowerforums to see if there are any better opinions than mine out there. ???
-
Here's what I found so far:
I use NyoGel 759G because it is one of the lubes that SureFire use. I got a 1lb pot of it a couple years ago. I've still got about 1/3 left.
"This gel type grease is mildly thixotropic i.e. it becomes semi-fluid on agitation, improving lubrication of the seal surfaces, but it returns to the gelled state when agitation ceases. The grease has excellent stay-in-place characteristics so it steadily provides free motion & water resistance."
[I had this description on file without a source, sorry]if your lubing surefire lights, Surefire doesnt recommend the use of any petroleum based lubricants as it causes the o-rings to swell
Hi, I struggled with this question about a year ago. Vaseline gums and sticks after a while and is said to degrade rubber seals. Liquid lubricants tend to collect dirt and migrate into flashlight internals.
The manual for my Princeton Tecs said "use silicone-based grease and no other." After a bit of digging on the Web, I discovered that polydimethylsiloxane is the stuff you need.
After poking around a bit, I discovered this it's available at any automotive store under the name "dielectric tune-up grease." It seems to work fine for "above water" flashlights, and it doesn't gum up over time. Got a lifetime supply at Cdn. Tire for under ten bucks.
A caution, though: I don't know the purity of this stuff. If I was relying on a diving light for life-and-limb, I'd pay the boutique price from the dive shop.
I don't think that natural rubber o-rings have been made in many years - they have all been made of synthetic rubbers for many years.
Don't worry about the lube damaging the o-ring - use whatever lubricant gives the 'feel' you prefer.
BTW, silicone greases tend to creep forever and attract dust like crazy, without actually being good lubricants.
I find that a light grease works nicely and minimizes the amount that gets into the works, unlike an oil which can migrate around the inside of the light.
Of all the threads I looked through most recommended either Silicone Grease or Nyogel.
-
In the USA, you can buy silicone grease in the plumbing supply section in Home Depot for about $3. That's what I use.
Here is an O-ring/chemical compatability chart:
-
Awesome. Thanks for the info!
Def
-
I second parnass's recommendation.
DO NOT use petroleum products on o-rings unless you know what material they are made of. Better yet, never use petroleum products on o-rings because you will likely NEVER know what material they are made of.
Petroleum products can make certain materials deteriorate or swell.
If it swells, ride it.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login