PST maintenance tools
-
@Craig said:
The Kick clip is a reasonable fit on the knurled heads and can be used as a spanner (you'll need two of them to take the bolt out). Some people use vice grips to do the same job but there is usually minor damage to the heads if you do it that way.Benner's put a clip on a PST, take a look at this:
My first mod.
This morning I was lucky enough to receive a new plier head for my PST courtesy of our good friend Kwakster (many thanks buddy). The head needed replacing a...
Multitool.Org Forum (multitool.ninja)
Welcome to the forum by the way

Thanks for the welcome, Craig...and the link....now I know it can be done ;)
GMB -
I used two kick clips to remove the screws (add a little heat before hand) and then dremeled out the portion of the handle for the anti roation tab. Then threaded the kick clip into the knurled screw and viola instant pocket clip. add a touch of superglue to the back of the clip and a touch of blue loctite to the screw and you will be in business. I have done about 6 of these so far and all have held up nicely.
-
Benner's put a clip on a PST, take a look at this:
/topic/7116I still like those pics, Benner...

Oh, and welcome Greenmanbacchus...

(Another Type O Negative Fan..?)
:DThanks for the welcome and the Link, AHB :) Those pics are great aren't they? Oh, and while I have indeed been known to listen to Type O Negative, I'm afraid I've rather lost touch with them since 'Bloody Kisses', which, now that I think of it was quite some few years ago at this point. I've been likened to both the Greenman and Bacchus ( Roman god of wine, women, and general frolicking)for a good many years before that, hence the nick. In fact, my woman calls me Dino, as short for Dionysius, the Greek equivalent of Bacchus.
( None of which, I fear has much to do with multitools LOL) Thanks for your help :)
GMB -
@RaptorMan said:
I used two kick clips to remove the screws (add a little heat before hand) and then dremeled out the portion of the handle for the anti roation tab. Then threaded the kick clip into the knurled screw and viola instant pocket clip. add a touch of superglue to the back of the clip and a touch of blue loctite to the screw and you will be in business. I have done about 6 of these so far and all have held up nicely.Thanks, Raptorman :) Your nick (if I may ask) Are you involved with hunting hawks? I've had my share of kestrels and various buzzards in the past...great fun, if a lot of work ;) Looking at Benner's work, I see that he has removed the anti-rotation tab entirely with apparent good results. That route seems to be less work, plus it involves modifying the clip only rather than the MT itself. Dunno how precise I'd be with a dremel with such small work. Nevertheless, I'm very appreciative of your idea...duly noted and logged ;) Thanks! :)
GMB -
No hunting hawks but plenty of ducks and geese. The name comes from when I was on an ATV forum and I ride a Yamaha Raptor 660.
I liked Benners idea I just like having the tab in place to eliminate the rotation which could occur. It was fairly easy to dremel just be sure you want it in the location when you start. Here is a pic of my camo PST II with kick clip mod.

-
here is a full view of it

-
it is exactly one year from benners mod.
-
Welcome aboard mate

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login