Bit adapter madness
-
This thread finally had the inevitable effect on me; I broke down and bought one of those Leatherman adapters. It came today, but.....
It didn't come with one of these fancy clamshell carrying cases like Prime has here:
Instead mine has a big dorky leather sheath, and a even dorkier plastic carrying contraption inside.

I like the adapter, but no way am I going to lug it around in a sheath that is bigger than my multitool sheath. :(
-
I thought that sheath actually looked pretty cool... :-[ :-[ :-[
But now I don't think I want to offer you a trade for it! :P
Def
-
Bob, that is the different style adapter from the one I have. I was wondering when being used with the SideClip does it fit into that cutout in the SideClips handles.
-
Mine is the Leatherman (Standard) Bit Adapter. It only fits the older PST, PST II, Mini-Tool, SideClip, etc. The paperwork that came with it is dated 1997, so apparently it is old stock. As ridiculous as this huge sheath and carrier are, Leatherman must have went back to the drawing board and came up with the plastic clamshell carrier at a later date.
Yes, the protruding tang fits exactly into the cutout in a SideClip's handle. I'm not sure what the purpose of the protruding tang is though?

-
Thanks Bob, it's strange that I find this stuff so interesting ::)
-
-
I agree. Man is known as the Tool Using Animal. What good is a tool using animal without a tool? Darwin would have slapped those other people for fouling up evolution.
Def
-
Thanks guys, It's good to know that I'm not alone.
-
You aren't alone... I'd say right about now there are probably about 410 souls in agreement with you!
Def
-
@prime77 said:
Yes the adapter you are asking about is made by Gerber. The one I have came with the Diesel model I have....Hope this helps :)prime77, can you tell if this http://www.cheaperthandirt.com/72915-5499-1278.html adapter fits the Diesel and Suspension?
The description says "fits all Gerber multi-plier" but that could well be in error.
Thanks again for your help.
.
-
I'm sorry that is the adapter that Jsews talked about that fits the older Gerbers not the Diesel and Suspension.
-
Yes, I agree. Ringzero, the one you linked to has a square hole in the base, made to fit the 400 and 600 series Gerber tools. It won't fit properly onto the new "flattened" phillips drivers like the Suspension has.
-
@prime77 said:
I'm sorry that is the adapter that Jsews talked about that fits the older Gerbers not the Diesel and Suspension.Thanks prime77, that's exactly what I feared might be the case.
Can't understand why Gerber doesn't make the bit adapters more available for Diesel and Suspension (and whatever other models that particular adapter would fit.)
I'm certain that some percentage of people who own a Diesel or Suspension would want to purchase a bit adapter kit to extend the capabilities of their multi.
If they knew it was available.
If they could find a source actually offering it for sale.
Seems to me that Gerber is missing out on additional sales for no good reason.
.
-
@prime77 said:
Bit adapters seem to be the norm with any new multitool that comes out. I think it's a good idea. Anything thats expands the usefulness of the tool works for me. Some work better than others. Here are a sampling of the ones I have. Do you guys know of any others.prime77, Nice thread! It's a very nice overview but you're missing one of my favorites. The Kershaw A100TA magnetic adapter has a unique design. The adapter is held by the locking pliers in either a 180 deg (shown), 90 deg, or 45 deg angle.

-
I had read about that adapter a while back but never saw any pictures of it. Thanks :) It looks to be truly an original.
-
I had the Kershaw tool a long time (before I discovered this place), but purchased one of the bit adapters after coming here, just for completeness sake. Has anyone tried to use it? Seems a bit awkward to me like it could slip out and/or be scratched up pretty good in the process. A unique design, for sure.
-
@ringzero said:
I'm certain that some percentage of people who own a Diesel or Suspension would want to purchase a bit adapter kit to extend the capabilities of their multi.Try emailing and ask if they have the new one with 9 bits they may just be not putting the newer one up on the web.
It might be made in Taiwan but it is a far better design than the old chrome plated one it has three extra bits and is made so you can fit a spanner for extra leverage (saves twisting the tools handle on really hard to loosen nuts)
They are available in the UK so should be over in the states-
http://www.shop4gerber.co.uk/gerber_accessories.html
below the pouch's.Dave
-
@zackhugh said:
I had the Kershaw tool a long time (before I discovered this place), but purchased one of the bit adapters after coming here, just for completeness sake. Has anyone tried to use it? Seems a bit awkward to me like it could slip out and/or be scratched up pretty good in the process. A unique design, for sure.There are recesses in the adapter to fit the pliers at three angles. At a 180 deg angle, the pliers fit tightly in the recess and it's surprisingly solid. In this configuration, it's probably as good as any other adapter. :) At a 90 deg or 45 deg angle, the pliers fit loosely. :( I'm not sure why they made the recesses at 90 deg and 45 deg so much larger than the jaws of the pliers.
-
@damota said:
Try emailing and ask if they have the new one with 9 bits they may just be not putting the newer one up on the web.
It might be made in Taiwan but it is a far better design than the old chrome plated one it has three extra bits and is made so you can fit a spanner for extra leverage (saves twisting the tools handle on really hard to loosen nuts)
They are available in the UK so should be over in the states-Thanks damota.
It helps to have the official Gerber part number. I finally was able to find the correct adapter kit on the Gerber website.
Apparently this adapter kit isn't commonly offered for sale, even by web merchants that carry the whole lineup of Gerber multis. Once I had the official Gerber PN, I was able to Google a few places - rather obscure places I might add - that do offer it for sale.
None of the big knife sellers or outdoor equipment sellers that I usually rely on seem to offer it.
Thanks again for your help.
.
-
I would have pointed you to Gerbers site but they have three listed there, all with the picture of the new one

That could be a reason retailers are a little reluctant to order them encase they get the wrong ones. When/if you order them try and get the boxed one because the last one I got was in a clam pack and it had the wrong sized pouch (too small). They sent me a couple of different tool pouch's with the extra pocket FOC after I contacted them so I think a rogue batch might have got out for sale.Dave
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login