Capability-to-Size ratio
-
There was a commercial on the television a moment ago. They were promoting some new sporty sedan, bragging about it's "high power-to-weight ratio." More power in a lighter vehicle of course means better performance.
That got me to thinking about multitools. (Of coure, everything gets me to thinking about multitools! ;) ) Anyhow, it seems to me that the equivelent measurement on a multi purpose tool would be a high "capability-to-size ratio." Theoretically, the more capability within a given size/weight, the better. Conversely, a big honkin' tool that can't do very much is more likely to spend its life in your sock drawer!
A few examples:
The original Leatherman PST crammed a lot of functions into a small rectangular box. In my opinion it has a much higher capability-to-size ratio than today's Leatherman Kick.On the other hand, my recently aquired Vic SportRatchet is a big brick of a tool, with not nearly enough functions to tempt me into carrying it on my belt. I would rate its CTS ratio as pretty dang low.
So do any other good (or bad) examples of capability-to-size ratio come to mind?
-
I would have to say that the Vic Spirit should fall into the high capability-to-size ratio. Lots of tools within a small frame. Being able to get to them from the outside is a added bonus

-
I think a lot of it has to do with how much you use your multi and what you need it for. I like your "capability to size" ratio though!
Here's how I would rate a few tools...
The LM Kick would be a mid level rated tool. It has a decent amount of functions in a good sized tool. The tools included in the Kick are ones I use quite a bit.
The Vic Spirit has a high CTS ratio. It's loaded with functions and is the perfect size for me.
The SOG Powerlock I just aquired has a low CTS ratio. While it does have a lot of "functions," they aren't ones I use most of the time.
Those are a few of the ones I can think of off the top of my head :)
-
The SwissTool spirit has a high capability-to-size ratio but It's hard to beat the little Swiss army knives when it comes to capability to size ratio...

That may be why they are so popular (judging by the number of NTSA auctions).
-
I actually think about this a lot. Is capability judged by the onboard tools? Does the bit holder on current Leatherman models improve capability significantly or does it have the opposite effect since it reduces the overall amount of tools? Is there an overall standard or does it vary by person-to-person.
In my opinion the Leatherman Blast and the Victorinox Spirit have the highest capability-to-size ratio. Both are mid-size tools but feature a selection of most every major tool in a decent size/weight package.
On the other hand, something like the Gerber Freehand has a very very low capability-to-size ratio. It is large in size and heavy but is missing most of the tools of it's contempories.
I think Leatherman has taken a step backward in this area, much their current line-up is larger but with less tools.
-
I agree, all very good points.
The ideal capability-to-size ratio certainly does vary between different individual users. I think it is probably more useful as a comparison measurement. For instance, it appears most of us agree that the "standard" line of Leatherman tools have a lower CTS ratio compared to that
of their earlier tools.But is this true across the board? How about the original Wave -vs- the New Wave? While the New Wave is certainly somewhat larger than the original, the New Wave also has some added features. Are those new features "worth" the extra size and weight? That depends on the person using the tool.
-
@Spoonrobot said:
I actually think about this a lot. Is capability judged by the onboard tools? Does the bit holder on current Leatherman models improve capability significantly or does it have the opposite effect since it reduces the overall amount of tools? Is there an overall standard or does it vary by person-to-person.In my opinion the Leatherman Blast and the Victorinox Spirit have the highest capability-to-size ratio. Both are mid-size tools but feature a selection of most every major tool in a decent size/weight package.
On the other hand, something like the Gerber Freehand has a very very low capability-to-size ratio. It is large in size and heavy but is missing most of the tools of it's contempories.
I think Leatherman has taken a step backward in this area, much their current line-up is larger but with less tools.
I also think Leatherman has taken a step backwards in this area.
-
How about Gerber?
The 400 series, 600 series, and Diesel tools all have a decent CTS ratio, in my opinion.
But all those new butterfly-openers coming out of China, like the Suspension, are a BIG step backwards. With such stubby blades and drivers, those tools simply are not capable enough to justify how fat and awkward they are. :(
-
-
Ooooh... you'd have to ask her. I would think I'd get good scores in both Durability and Ease of Use :)
-
Okay, back on topic:
I agree that the Vic Spirit is among the best (if not THE best) at cramming a lot of features into a small package. But are there any others that really stand out?
How about the Leatherman Micra?
-
Definitely,the Micra is up there, so is the Juice KF4,and XE6,at the low end of the scale,I'd have to put the Gerber Auto Recoil,probably the Nautilus too.
-
@J-sews said:
Okay, back on topic:I agree that the Vic Spirit is among the best (if not THE best) at cramming a lot of features into a small package. But are there any others that really stand out?
How about the Leatherman Micra?
I made an attempt to quantify "capability-to-size" ratio.
Here's tools per gram:

and here's grams per tool:

From these comparisons, I'd say that the Victorinox Rambler has the highest "capability-to-size" ratio and the Leatherman PST and Victorinox SwissTool Spirit are tied.
Here are the numbers that I used:

And here's a list of the implements that I included in the tool count:
Victorinox Rambler
Small blade
Scissors
Nail file
Screwdriver
Bottle opener
Magnetic Phillips screwdriver
Wire stripper
Toothpick
Tweezers
Key ringLeatherman PST
Needlenose Pliers
Regular Pliers
Wire Cutters
Hard-Wire Cutters
Clip-Point Knife
Metal File
Wood File
8 in. / 20 cm Ruler
Can Opener
Bottle Opener
Small Screwdriver
Medium Screwdriver
Large Screwdriver
Phillips Screwdriver
Awl PunchVictorinox SwissTool Spirit
Needle nose pliers
Screwdriver (2 mm)
Screwdriver (3 mm)
Wire cutter(for wire up to a hardness of 40 hrc)
Bottle opener
Screwdriver (6 mm)
Crate opener
Combi-edge blade
Scissors
Metal file
Metal saw
Wood saw
Reamer
Phillips screwdriver
Chisel/scraper
Isolation length cutter
Wire bender
Wire stripper
Wire scraper/round cutter
Can opener
Multi-purpose hook
Hard wire cutterAfter I made the graphs I noticed that Leatherman lists two types of pliers for the PST and Victorinox lists one type of pliers for the SwissTool Spirit. I should have compensated for the difference but was too lazy to redo the images of the graphs. Even dropping one tool on the PST results in numbers that tie the SwissTool Spirit (see image below):

-
I don't know how it would work out in your calculations,but for a few grams more,with the PST II.you get scissors.
-
-
@Bison56 said:
I don't know how it would work out in your calculations,but for a few grams more,with the PST II.you get scissors.I also thought it would change things but according to Leatherman they are the same weight and (if I added correctly) have the same number of tools:
Needlenose Pliers
Regular Pliers
Wire Cutters
Hard-Wire Cutters
Straight / Serrated Knife
Diamond-Coated File
Cross-Cut File
8 in. / 20 cm Ruler
Can Opener
Bottle Opener
Extra Small Screwdriver
Medium Screwdriver
Large Screwdriver
Phillips Screwdriver
ScissorsHere's a new graph of tools per gram with additional multi-tools and an adjusted number of tools for the PST:

-
Hmm, excellent work Supratentorial. Clearly there is more to this than it first appears. One factor I see weighing heavily on your charts is inherent to the plier tools. The plier head itself must be strong, therefore it alone makes up a large percentage of the weight of those tools. A SAK or even a tool like the Micra with a lighter weight scissor head will compare favorably.
-
I wonder how the Wenger Rangers compare...For the sake of multi-tool science, please have felinevet send me one of those Wenger Rangers (with pliers) so that I can collect more data! :P
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
