Sharpening SAKs
-
Fior me about 40 degrees inclusive ( 20-22 degrees a side ) with a 15 degree micro/backbevel .
Chris
-
I use the 20 and it works great! Just sharpened up the Farmer blade and it'll shave hair right off my arm. :)
-
20 Degrees and I light touch of a strop will give a scary sharp edge . Strops are also good for field touch ups , ditto around the shop .
Chris
-
Well, my first sharpening session. Since I was working on new knife I used finest stone to just polish the edge. After few passes I notice that original edge is not very consistent as far as the angle and my 20 deg. angle was not touching the edge in some places along the edge. I switched to a lower grit and re estabilished the 20 deg. Then I moved up to higher and higher grit till I ended up with even edge that I can shave hair of my arm. Now I have excelent edge- verified with 16x power eye loupe, bold spots on my arm and wife that thinks I am missing something up there.
-
Yay..

I use a Sharpmaker myself, but the bold spot and wife thing is the same.. ;) :D -
I use a round ceramic sharpening stone freehand and I strop afterward. My SAK's are always nice and sharp using that method.

-
Sometimes it's a good idea to mark the edge with a sharpie , that gives you good feedback on what metal you are working on . Sounds like you did good .
Chris
-
I avoid the bald patches by testing the blades on my thumbnail

-
Ya could try shaving your legs , that should really set the Old Lady off !
Chris
-
How do you strop? I know about leather belt, but then I heard about newspaper or reversing strokes on very fine stone.
-
I avoid the bald patches by testing the blades on my thumbnail

when your thumb falls off you know its sharp enough

I red about thumbnail test on web site about sharpening shaving blades. It must be a lost art since there are fewer barbers around. Still it makes me shiver just to thing of running sharp blade across my thumbnail since I did that few times unintentionally and ended up cutting almost all the way through the finger nail.
-
I test blades on my left thumb all the time , you get used to it . Do it in private , it tends to creep out onlookers .
Chris
-
Stropping is a bit of an artform . On a SAK , use very light pressure , too much and you will actually dull the blade .
The Knives Ship Free website has some good clips on the subject .
It's well worth mastering , it can turn a small blade like a classic into a pocket scalpel .
Chris
-
When I had long hair, before I joined the IDF, I used to split hairs to check if a blade was sharp, just take a hair that's still attached to my head and run the blade over it lightly.
Now I use my right thumb nail. -
Well my Sharpmaker (finally) arrived
(bloody ash cloud
); first thing to sharpen was my OHT, which i had removed the serrations from.15min later - HELL'S TEETH!!! from bluntish (thanks to the file) to shaving sharp (bald patch on arm :ahhh)
If anyone has read terry pratchett's 'reaperman', they will appreciate that Death could have done a better job on his scythe with the sharpmaker than sharpening with silk and sunlight!
Must. Find. More. Things. To. Sharpen!!!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login