New Tool!
-
The quality of the tool and the parts is good its just little things that should not even be an issue. I just think Leatherman needs to tighten the QC screws a little bit, at least on their $100+ tools IMHO.
-
@CumminsDiesel said:
Nice Charge
.Just a question,why Leatherman still continue a BAD QC on Charge,especially,and other multitools ?Every time I read about Charge and always same problems! >:( For me its turn away from this company such like their miltitools going same QC like China made products,sometime even worse.I think we can safely ignore that...
That said, I think I can help with a couple of the problems you have TxSxB.
The bit card fits easily in the pouch at the back of the sheath - but only when you realise you need to insert it with the bits facing the back of the sheath - i.e. flat side forward. Should slide in dead easy then.
The file rubbing. That seems to be a complaint that's cropping up a lot lately, and it's hard for me to relate to as all of my Charges are fine. The file should just gently kiss the Ti scale right at the last point of closing it - shouldn't really rub - it definitely shouldn't be filing the scale! You should be able to see a clear gap between the file and the scale all the way down.
The bad edge on the blade and "stickiness" of the pliers make me wonder if it really is new - Charges with 154CM or S30V blades never come anything less than scary sharp! Where did you get it?
-
It came from eBay NIB, I looked it over extensively when I got it and couldn't find any scratches or any signs of wear, but the pliers have worked themselves in nicely, the S30V blade is nice and scary sharp now but it needed some help out of the box :-\ and the file is doing its job to the titanium, i figure diamonds>titanium so it'll work a nice little space in there sooner or later. I can get one card in the sheath and it fits ok, but it does hold the Charge in there a little tighter. I just picked the best bits out of the bunch and threw them in one bitcard in my wallet.
-
Congrats on your new charge. :)
-
@TxSxB said:
It came from eBay NIB, I looked it over extensively when I got it and couldn't find any scratches or any signs of wear, but the pliers have worked themselves in nicely, the S30V blade is nice and scary sharp now but it needed some help out of the box :-\ and the file is doing its job to the titanium, i figure diamonds>titanium so it'll work a nice little space in there sooner or later.Yeah - I suspect you're right, but it shouldn't be so :-\
Just to satisfy my curiosity on this, how does yours differ from my EDC TTi? The way I see it there are two options:
a) The file is touching at the end, therefore you'd expect the gap to be noticeably bigger at the pivot end;
or
b) The file is bent and bowed.

-
It is touching at the end near the nail nick, I gently bent it back and it's better now, still touching a slight bit but alot less grinding going on thanks Dave!

-
Oh that's good news. Take care with the bending though - those files are made from very brittle steel.
How did the tip with the bit card go? I could have kicked myself when I eventually figured that one out :D
-
It works better like that I also figured it would go bits out but now I see that I was very wrong :o, I was hoping to get both bitcards in though, but that doesn't seem feasible, not a big deal though I probably don't need all 40 bits on me all the time.
-
Two bit cards would be pushing it a bit I think!
Obvious when you realise which way round it goes isn't it? They should provide instructions for the sheath :D
Looks like you're good to go anyway - hope you like your Charge as much as I do

-
I had the same problem with the diamond file on the charge TTI from cabelas that Bob sent to me. It rubbed against the titanium handle as well.
It does seem like this is not an uncommon complaint :-\
-
Don't get me wrong,I like Charge, .. BUT!...seems like people pay for titanium scales and brand name,and QC is far,far behind.The price for Charge is over $100 !!! The Leatherman needs a better QC for their MTs.
-
I think I have voiced well enough of my concerns over LM QC, but as Davek helped me realize, I was generalizing a statement made from not enough facts. While I have had a lemon or two from the Wave/charge/surge line, I can safely say that my ST300, both Blasts, my micra, and P4 were all perfect tools. I only have the ST300, Blast, and Micra now, the p4 went to Pops as a gift. Moreover, my only actual Lemons were a Charge ALX with a badly ground blade spine(vertical play like you wouldn't believe), and pretty much 2 of the Juices I have owned. SO, that makes it a little unfair to say that Leatherman has bad QC, there just seem to be a few quirks they need to iron out.
-
@Mercury said:
I think I have voiced well enough of my concerns over LM QC, but as Davek helped me realize, I was generalizing a statement made from not enough facts. While I have had a lemon or two from the Wave/charge/surge line, I can safely say that my ST300, both Blasts, my micra, and P4 were all perfect tools. I only have the ST300, Blast, and Micra now, the p4 went to Pops as a gift. Moreover, my only actual Lemons were a Charge ALX with a badly ground blade spine(vertical play like you wouldn't believe), and pretty much 2 of the Juices I have owned. SO, that makes it a little unfair to say that Leatherman has bad QC, there just seem to be a few quirks they need to iron out.Agree,but,what price is for ST300 and Charge?Charge is more expensive and has QC issue.Look at SAK's and Swisstool's,for example,whatever is price range - they ALL IS HIGH QC!Now look at LM,ST300 - good,Blast,Micra - good QC,next - Charge,Surge and etc. not saying its a BAD QC,but its not what I want to see in a MT for a price range over $100!And I read a lot of forums and most people agree that Leatherman QC is going down,especially with high end LM products.
-
Most people? Or is it just a few people who repeat it often?
-
-
Most people? Or is it just a few people who repeat it often?
Dave,:-) its fairly often and not just a few people.
I would hazard a guess that about 75% of the criticism of Leatherman on this site in the last week has come from just you, give or take. You seem to be on some kind of trip to share your limited, and somewhat odd experiences.
Most people? Or is it just a few people who repeat it often?
::)
Not aimed at you :)
-
Most people? Or is it just a few people who repeat it often?
Dave,:-) its fairly often and not just a few people.
I would hazard a guess that about 75% of the criticism of Leatherman on this site in the last week has come from just you, give or take. You seem to be on some kind of trip to share your limited, and somewhat odd experiences.
Most people? Or is it just a few people who repeat it often?
::)
Not aimed at you :)
I'm not criticism a Leatherman,I like it a lot,but WHY Charge cost more than $100 and STILL have a same BAD QC IN ALMOST EVERY UNIT?
-
Most people? Or is it just a few people who repeat it often?
Dave,:-) its fairly often and not just a few people.
I would hazard a guess that about 75% of the criticism of Leatherman on this site in the last week has come from just you, give or take. You seem to be on some kind of trip to share your limited, and somewhat odd experiences.
Most people? Or is it just a few people who repeat it often?
::)
Not aimed at you :)
Just stop it!!! No more polemics :D ,you better tell me about pliers,I mean does a Crimper on pliers feels like a weak point?Or Charge Ti is better here?
-
Most people? Or is it just a few people who repeat it often?
Dave,:-) its fairly often and not just a few people.
I would hazard a guess that about 75% of the criticism of Leatherman on this site in the last week has come from just you, give or take. You seem to be on some kind of trip to share your limited, and somewhat odd experiences.
Most people? Or is it just a few people who repeat it often?
::)
Not aimed at you :)
I'm not criticism a Leatherman,I like it a lot,but WHY Charge cost more than $100 and STILL have a same BAD QC IN ALMOST EVERY UNIT?
I strongly disagree with that wide sweeping generalization.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login