Second Generation Multitasker.
-
LMAO, yesterday when I was at my buddies house, he asked me what do I usually do when I'm on the internet bored. I told him I have a tendency to just Google random Sht, so he did just that and apparently found some fairly amusing videos.
-
The talk above about billet-machined pliers reminds me of how impressed I was when I first saw this tool at the Shot Show.
I mean, check out the way those jaws fit together! Where the little serrations are....every zig on one jaw fits into a corresponding zag on the opposite jaw! :o
Plier esthetics at their finest!

-
Bob
I know this is an old thread but I just got a multitasker. Is that pic a series 2? My tool looked a little different. I will look at it closerm The teeth on the pliers I got fit better than any tool I have seen. There is no play or wobble at all. I have carried it three days. I plan to carry it a couple weeks and decide if I will edc it. It costs as much as a charge AL but after feeling the quality I don't mind paying that price. D2 head, bronze washers, 440c knife, g10 handle. CNC parts... It is as premium a tool as the charge. -
I need to get one of these! They have precision I like, and they just look great.
-
@scrappy said:
Bob
I know this is an old thread but I just got a multitasker. Is that pic a series 2? My tool looked a little different. I will look at it closerm The teeth on the pliers I got fit better than any tool I have seen. There is no play or wobble at all. I have carried it three days. I plan to carry it a couple weeks and decide if I will edc it. It costs as much as a charge AL but after feeling the quality I don't mind paying that price. D2 head, bronze washers, 440c knife, g10 handle. CNC parts... It is as premium a tool as the charge.Congrats on the Multitasker aquisition Scrappy!!

That picture in my previous post was a very early prototype version of the Series II. Notice it still had the bypass wire cutters at that point, and did not have the roller bearings in the pivot yet.
The production version pliers are shown below:

Notice the anvil-type wire cutters, and roller bearing pivot. 8)
-
I am a big fan of Multitasker tools. Love their quality and attention to detail.
Yes, the roller bearing pivot is the second run of the second generation. My first photo in this thread shows the first production run of the second generation. I think of them as 2.0 and 2.1 for some reason.
-
Bob
Thanks fort the pic,that's what mine looks like. I will be using the anvil cutters in the next couple of days. I'Ve used the pliers and they are very strongChako
That bearing pivot is awesome, huh? -
Speaking of Multitasker, I've been playing with a few of Shane's new concepts for the past week or so. One of them is a model with a knife blade mounted outside of the plier channel, which of course allows the blade to be much larger.
Teaser pic, compared to a standard Generation II model:

-
Ooohhh man that is sweet. Just one more thing to make me wish I had a DeLorean with a flux capacitor so I could get my hands on the EDC. I have never been more anxious to see a tool before.
-
@J-sews said:
Speaking of Multitasker, I've been playing with a few of Shane's new concepts for the past week or so. One of them is a model with a knife blade mounted outside of the plier channel, which of course allows the blade to be much larger.Teaser pic, compared to a standard Generation II model:

CE. >:(
-
While I prefer a PE in a dedicated folder, I think in a multi CE makes a lot of sense. Multis are all about trading ultimate effectiveness for more versatility and in that mind set a CE fits right in. Would I prefer a PE? Sure, but I don't object to a CE either since it's at least logical in a multi, as opposed to on a dedicated where it just results in two half-assed blades. A multi is already a large collection of half-assed tools anyway lol.
-
@J-sews said:
Speaking of Multitasker, I've been playing with a few of Shane's new concepts for the past week or so. One of them is a model with a knife blade mounted outside of the plier channel, which of course allows the blade to be much larger.Teaser pic, compared to a standard Generation II model:

Looks great! Is that proto going to be a bit more EDC?
Or rifle specific as well :( -
@J-sews said:
Speaking of Multitasker, I've been playing with a few of Shane's new concepts for the past week or so. One of them is a model with a knife blade mounted outside of the plier channel, which of course allows the blade to be much larger.Teaser pic, compared to a standard Generation II model:

ah, my work blocks the pic. I better go check on my phone.
-
Bob,
what do the pliers on that proto look like?
my only complaint would be the pliers do not open wide. -
This proto is just an expiremental platform for the larger, outboard-mounted knife blade. The pliers and such are standard Generation II.

As regards plier opening/width, I agree with you Scrappy. I'd like to see a bit more opening width myself. But then again, I'd also ask for a large-tooth, large gripping area, just like all other multitool plier jaws have. I guess the Multitasker folks are thinking that with no provision in these jaws to grab onto large diameter objects, the pliers don't need to open as wide...?

-
Big blade looks awesome, and it might help sales, but if one was really honest I think they would find the smaller blade is more than adequate, so I'd have to go for the reduced weight and cost of the small blade. ....but.... I know that market screams for large blades with LM making such a big deal out of it.
-
I thought I would bring this to the top again ans show some comparison shots. The multitasker is shorter when closed than the super tool, core, swiss tool or freehand BUT the screw driver and pliers are longer. It has the longest driver I am aware of and the bits are formed very well. You can see here the plier is also longer than the competition. better reach, all in a smaller handle. The knife is shorter but very usable.




-
All good points Scrappy.
Great comparison pics too. :) -
EDC EDC EDC EDC version
:D :D :D -
Thanks for the kind words Bob. I like the tool so much that when I heard the ball bearing is discontinued I bought one from edcknives. I owned one before but no longer have it. When I heard it was being discontinued I bought another right away. I am sure the new tool will be great, even better but I had to have one of these in my collection.
Mat, I can't wait for the edc model. I bet more stores will pick that one up.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login