Screwdriver width
-
Yeah the one im talking about is the 91mm victorinox. Just trying to work out what tool i could pair with that screwdriver. I really prefer not to have the magnifying glass.
-
The white led is the other tool that fits isnt it?
-
Not keen on that either :) I want to see if i could use the electrician or pruning blade but i might have to add shims on each side to make it up to the 2.8mm screwdriver width? But i still dont know if it would fit teh back sping either.
To the modders out there, it would be good teh next time you have a knife apart if you could take photos of the spring shapes so it could help people figure out what works/can be made to work.
-
@Cyclone82 said:
Yeah the one im talking about is the 91mm victorinox. Just trying to work out what tool i could pair with that screwdriver. I really prefer not to have the magnifying glass.Not sure what your saying but both of those are from the 91mm line; the old and new versions, shorter one is the latest. They sit above the liner when closed so the extra width of the tip does not interfere. I suspect while close, the springs are actually slightly different widths for these two drivers, but maybe not.
@Cyclone82 said:
Not keen on that either :) I want to see if i could use the electrician or pruning blade but i might have to add shims on each side to make it up to the 2.8mm screwdriver width? But i still dont know if it would fit teh back sping either. ...You might see of you could find two tools to fit opposite without shim or slim shim between tools. That would be cool.
-
This is what i want but i dont want the magnifing glass

Not sure what your saying but both of those are from the 91mm line; the old and new versions, shorter one is the latest. They sit above the liner when closed so the extra width of the tip does not interfere. I suspect while close, the springs are actually slightly different widths for these two drivers, but maybe not.
My response was regarding you response below where you say (in bold)
The shaft seems pretty consistent on width, but the screw driver tip is wider on Vic, it has a bit of a diamond shape. I'd say it protrudes an extra 1 mm.
And it led me to think you were talking baout an inline screwdriver on a victorinox and a scredriver on something else
I thought If the tip of the screwdriver is about 3mm, i would say i need a width of at least 3mm between liners which would mean a 3mm wide tool at the other end or shims either side of a thinner tool. At least thats what i thought. I need a tool the same width as the screwdriver basically. At this stage i would like to add the electricians blade, pruner blade or can opener with the screw driver. Iv its the can opener then i will fit the electricians or pruner blade in place of the can opener. I will consider anything other than the Magnifer or LED. i just really cant bare to have those right now
-
I've seen other tools added opposite the phillips but normally with a bit too much of a fudge factor with washers for my liking :-\
If you get anything to work well I'd be very interested

-
Yeah i know what you mean, im not keen on washers either. But i want to think of an option other than the mag or LED
What are the 2 different models with the different length screwdrivers?
what tool is opposite the longer screwdriver?
Can anyone post a photo of a 93mm alox with inline screwdiver lookign down at the top/opening side of the knife with tools closed so i can see where the phillips head sits?
-
I want you to think of a neat option as well :D
All 91mm models with an in-line phillips after 2005 have the shorter one and hence older models have the longer one. Before you get too excited the actual working reach is the same on both as the older style has a larger tang.
The only tool found opposite the longer one is the old style magnifier.
-
Thanks, now i know what year knives to look for. I guess the only option is the exlporer. If i had to go with a magnifier it would be the old one. I dont like the all clear plastic one thats for sure.
-
Will another Phillips fit opposite the Phillips? That would be just a little bit redundant of course, but maybe...

No, pretty useless I guess :P
-
A spare :D I want to try and think of something. A fire striker thingy? You how on the 111mm they have a Phillips under the pliers. I wonder if that would work on a 93mm? I just quickly measured the pliers on a 91mm and they are roughly 2.8mm i would say. Dont have veriners with me right now.
Or grind down the width at the pivot point of the phillips. That may work then. Im also thinking of ways to shuffle things around. I sort of have an idea or 2 in my head but i really need to get the parts and try it out.
-
I think i might have worked out a way here at least part of it. Notr really sure on the aspect of where the phillips sits or how you grap onto it open it etc. I need to order some saks with inline screwdriver. I want one of each type like shown in above photo with 2 different length screwdrivers to see whats going to work best.
so is this right?
pre 2005 - long phillips + old style grey magnifier
2005 > - short phillips + new style clear magnifier and LEDI will start looking for these.
-
That's right.
-
Neil: Wasn't there a year between the new magnifier and shorter Phillips, though? I seem to recall there being examples of the new magnifier with old Phillips on factory knives.
-
I don't know if you could get a Wenger tool to work, but Wengers pair the Alligator wrench opposite the inline Phillips (which I think is sheer genius).
-
I was wondering about this too thx
-
@Sazabi said:
Neil: Wasn't there a year between the new magnifier and shorter Phillips, though? I seem to recall there being examples of the new magnifier with old Phillips on factory knives.Pretty certain that never happened. I've certainly not seen one and it would mean them having made two different tools only a year apart.
-
One could always try to use a second Phillips machined into a narrow straight screwdriver like on the technician. Today I really needed a powerful magnet, might be a tool idea in that, but it likely would not be used too often and might be problematic.
-
Well, i possibly may have thought of something. Not so much as what tool to use but how to use a thinner tool and not have shims, but the more i look at it the harder it would be. Would require custom milling of new liners and stuff, which i could get done in USA but its kind of a bit mich to do just for a pocket knife and im still not sure where things would actuall sit. Basically i would start with a farmer and would like to add a screw driver layer in the middle, would probably have to be between can opener layer and saw so even if i had a phillips and a small blade in there, i would still hav eto be able to grab the tool out.
Machining a second phillips to a technicians screwdriver is a very good idea. How exactly do you do this? will it muck up the heat treating?
-
Neil: Wasn't there a year between the new magnifier and shorter Phillips, though? I seem to recall there being examples of the new magnifier with old Phillips on factory knives.
Pretty certain that never happened. I've certainly not seen one and it would mean them having made two different tools only a year apart.
Maybe it was something I dreamed.

[Edit: According to SAAM's 91mm Tools Evolution, the new magnifier came in 2004 and the new Phillips in 2002; I had the tools flipped.]
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login