PST
-
How's this? Can you tell what it is the back? It's the same species of snake, but the negative makes it harder to make out, in my opinion.
-
I wouldn't recognise it if I wasn't looking for it, and even looking I'm not sure I'm seeing what is actually there.
-
Yeah, I figured it would be too complicated. It's a Gaboon Viper brandishing its fangs.
-
What about this?
-
-
SNAPPED?! Ouch, that's a bummer. Sad How did it happen? Under normal use, or abnormal abuse?
Officially, I was innocently turning a mildly stiff screw.
Unofficially I was cracking concrete around a bathroom tile.
It never would have happened if I was using the Vic Cap Lifter!
Fortunately, Tim saw fit to equip the PST with no less than Three dedicated flat heads ::)
So whatcha gonna do about the busted screwdriver Nomad? Is it totally broken off, or is there enough left sticking out that you can re-profile it on a grinder?
-
I'm in concurrence with J-Sews on that one Viper.
So whatcha gonna do about the busted screwdriver Nomad? Is it totally broken off, or is there enough left sticking out that you can re-profile it on a grinder?
There probably is at that, I was just going to dismantle it and see what other tools I could fit in the space.
-
Yes, think I'll keep this one. It's less complicated, and you guys probably already know that I like multi-tools and knives.
-
you guys probably already know that I like multi-tools and knives.
Hey, you do?
Cool, I know this neat forum...
My PST is loose enough that during "Quickdraw" the blade managed to flick out in time to stab me but good.
I'm not all that worried, if I was actually using it and snapped it closed, the Knife-side-handle would be up against my palm - that's just the way I hold it.
But since I was dicking around, I had the File side in my palm, and got bloodied for my troubles.
Still, it'd take more than a few lost fingers to dampen my affection - for all the Wave's locking blades, one hand opening knifies, and cushiony handles, it lacks the no-frills, bullsmurf-free* beauty of the PST
*Well, as little bullsmurf as folding pocket pliers with built in screwdrivers can manage - there will always be something a little moist, warm, and funky smelling about Multitools.
-
Pictures! (A moment of thanks for the reckless disposal of serviceable equipment by modern consumers!)
I've ordered some modifications to my PST, which requires sending some blades to the machine shop.
PST blades -
Is it usual only to have one washer?
After using various high-end Pliers, genuine vice grips, and other precision tools to carefully and meticulously round off the edges on the bolt/nut, I managed to open 'er up using Soon-to-be-Hawkchucker's SideClip
-
@Nomad said:
Pictures! (A moment of thanks for the reckless disposal of serviceable equipment by modern consumers!)I've ordered some modifications to my PST, which requires sending some blades to the machine shop.
PST blades -
Is it usual only to have one washer?
After using various high-end Pliers, genuine vice grips, and other precision tools to carefully and meticulously round off the edges on the bolt/nut, I managed to open 'er up using Soon-to-be-Hawkchucker's SideClip
We are told to use only the right tool for the job, but quite a number of tools work well for rounding off the the edges of Leatherman knurled screws.... :D

So don't leave us all hanging on the edge of our seats Nomad, what are these modifications you have on order?
-
Yeah we wanna know. :)
-
Mods have not happened.
I've got a Question - Does anyone know if any changes were made to the PST wire cutter area throughout production?
Could some folks with PSTs please show some pics of the wire cutters (not side on, but looking down on them from above with the plier jaws open)
(I'm wondering if mine are a funny shape, or have distorted with use)
-
No joy? I'll try to snap a pic of mine then, and you can jes tell me if yours be different.
-
Does this help at all?

Struggled to get the lighting right, so sorry about the shadow!
-
Not really, teh beh onneh.
Need to be looking straight down the jaws of the plier head, lengthways. -
I tried to take some then but couldn't get enough definition.
I'll play with the macro (?) after some Driving Juice and see how I go.
-
Ok here are a couple more for you. I forgot to change it to tungsten as Terry suggested so they are a bit yellow but you get the idea.


-
Okay, that first one in the last post is perfect.
What year is your tool?
Can someone with a real new one take the same pic?
The wire cutters on mine are a lot thinner and a different shape - they look a lot less sturdy.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login