vehicle maintenace
-
Today i spent the morning rotating my tyres, checking fluids, tightening my front end on my jeep with my torque wrench. I try to limit paying someone else to do the upkeep on my vehicles when i can do it myself and save $$$ . So far i have changed out shocks,brakes, water pumps, serp belts, batteries, tyres, heater cores, and engine timing chain (that sucked!) Aside from popping open an engine or transmission most upkeep is fairly straight forward.
My S-10 lasted 11 years before it would cost more to keep er running that it was worth. I'm hoping with some tlc i get a lot of years out of my current vehicles.
I recommend getting a Hayes or Chilton book concerning your vehicle and joining a vehicle specific forum. Trailvoy.com and Jeep-JK saved me quite a bit of cash in the last couple of years. Usually someone else has had the same problem you might be experiencing with your vehicle you can share pics/solutions.
Plus working on your own automobile you get to buy more tools. :D
-
I just found out tonight that my Jeep's brakes are just about shot. I think I may be low on fluid and that possibly means a leak somewhere. Since the rain is streaming down like crazy out there I won't be able to check them until tomorrow.
Hopefully it won't be too serious as I really hate car repairs right before Christmas...
Def
-
down here everyone gathers around a car at night during the holidays to help whoever is fixing it. Gotta have a beer or two in hand..kids running around in the yard playing. You gotta have 3 of the old timers telling you how you're doing it wrong too. ::)
-
The beer would be watered down in a matter of minutes here tonight! Plus it's only a handful of degrees above freezing, so if it's all the same to you I'll wait until tomorrow! :P
Def
-
When I lived in the country I did most of my own repairs but now in the city it's pretty hard not having a dedicated workshop. I do see guys doing rather extensive repairs on the street but that's just a bit too ghetto for me. I'll still do simple stuff like change a battery or a belt but not much else unless I'm upstate at my friend's farm. Bit of a bummer, I kind of enjoy working on cars.
-
47 years (31 driving) and I've never paid another person to work on any of my cars or trucks. :D :D
Though I have traded a lot of beer and food for a helping hand, now and then...
EDIT: Except for body work, unless it is the most rudimentary of repairs, I leave it to the experts

-
@theonew said:
When I lived in the country I did most of my own repairs but now in the city it's pretty hard not having a dedicated workshop. I do see guys doing rather extensive repairs on the street but that's just a bit too ghetto for me. I'll still do simple stuff like change a battery or a belt but not much else unless I'm upstate at my friend's farm. Bit of a bummer, I kind of enjoy working on cars.I do too, but I am also limited at home. I own and live in a small apartment building, and to keep my property values up I have banned the tenants from doing any serious work on their cars in the driveway. I don't want to try and rent an upscale apartment (my house is listed above average) when there's an '84 Mustang with no motor on blocks in the yard.
Tragically I have to set a good example, so my rule is nothing that takes more than two hours, worst case scenario.
Def
-
Yep, not good for property values :D

-
I dropped the Jeep off at the garage this morning to get the brake system checked. It needed to go somewhere for a safety check (annual thing here in NS) that actually expired in July, so I guess it's a good thing something else had to be done too. It's an expensive ticket if you get caught with a vehicle without a valid safety sticker.
Def
-
Just got to love mandatory inspections. It's like a money printer for the government...
(I guess they already own the money printers, but you know what I mean)
-
Well I got off pretty easy- looks like it'll be about $160 this time around. The brakes were only a bit low and so it needed to be bled and topped up, which is what I figured as well. But, since I'm not a pro, I figure it's best to get a second opinion, since like I said, it had to go in anyway.
Often times garages use these annual inspections to "find" all sorts of things wrong with your car, so the inspection (usually anywhere between $29.99 and 79.99) can often cost hundreds of dollars.
Def
-
if you find the right place they will slap a sticker on without even glancing at your auto ;)
Inspection down here is annual..runs 47 bucks..20 of that is an emissions test. I always take it to jiffy lube..worst they can upsell me on are wiper blades
-
We have a place down the road that <u>only</u> does MOT (Ministry of Transport) tests. They can't upsell you on anything. That said my local garage are straight with me so I can't complain. Even when I tell them that x and y are probably borderline and may need fixing to get through tthe test I often find they've passed it and just put x and y down on the advisory note (stuff that <u>must</u> be done before its next test and really should be done ASAP).
They only bits I do on the car myself are the bits that only need a couple of spanners or a screwdriver.
-
With the rising prices on the auto industry, more people are turning to self mechanics, as can be seen here (NSFW!).
So, you're all acquainted with mandatory inspections, uh? What a rip off. Here it varies according the car age, up to 4 years there's no inspection, after that is every two years up to 8 yrs old, then annual. It costs about €30.
-
No inspection up to three years and then annual. £55 for a normal car. Less for bikes, more for bigger stuff.
-
I used to know a few places like that back in the day, but it's not worth it to most garages nowadays. The entire check can be done in a half hour or so and the fine for letting something go out that's not right is huge.
Def
-
@turnsouth said:
47 years (31 driving) and I've never paid another person to work on any of my cars or trucks. :D :DThough I have traded a lot of beer and food for a helping hand, now and then...
EDIT: Except for body work, unless it is the most rudimentary of repairs, I leave it to the experts

(forget for the moment that I work in a body shop) I prefer doing body work over engine or transmission work! I have a clunk in the rear end of my truck that is likely the slip yoke (cheap fix, not serious but I don't know how to do it), and my power steering pump may be going out. I hate doing work on those areas, especially the driveshaft.
Body work is really pretty simple unless the damage is catastrophic, in which case you replace parts. And use bondo EXTREMELY sparingly. People seem to forget that part. Bondo is a factory item too, it is already on your car when you buy it new, it was just applied correctly. The hardest part about replacing welded on parts is getting the welds right and if you have to cut a uniside anywhere the seam has to be feathered perfectly.
-
@Mercury said:
Body work is really pretty simple unless the damage is catastrophic...I don't know Sean, I think it takes a special skill or talent. I've tried finish body work many times, and it always comes out looking like blindfolded monkeys were swinging sledgehammers. :ahhh
Well maybe not that bad, but there is a certain knack to it that I have never been blessed with. -
Body work is really pretty simple unless the damage is catastrophic...
I don't know Sean, I think it takes a special skill or talent. I've tried finish body work many times, and it always comes out looking like** blindfolded monkeys were swinging sledgehammers**. :ahhh
Well maybe not that bad, but there is a certain knack to it that I have never been blessed with.That is actually a good representation of the bodymen in my shop!!

But they are like ninja monkeys with jedi skills, they are really good.
Like I said, most damage shouldn't be repaired, the part should be replaced. There are some dents that cannot be brought back out well enough to look factory. Correct Base coat and clearcoat application are key as well, if it's too thin NOTHING will buff out, you'll burn through and have a nice dull spot if you are lucky. 2 to 3 coats of Clear are recommended, and you always have to buff the panel to get the factory look. Clearcoat doesn't just come out that way, it's polished. You just have to have enough there to polish. I haven't been in the body industry too long, but I have already learned enough to take the "rubiks cube" feel away from the trade and turn it into "1000 pc puzzle" difficulty.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login






