Plier tightness?
-
@SuzukiGS750EZ said:
Is there a way to tighten the pivot on the surge? If i remember correctly, the way to tighten it is to get a punch and peen the center of the pivot?I think thats what i heard
but i think it tightens the pivots not closer together but tighter at the actual pivot. that make sense? ill search for that thread and link it in if i find it
EDIT: I can't find the thread
-
Sparky had a method: /post/614748
(The rest of the thread has more explanations and reports of the results on an LM Kick.)
-
@Lynn LeFey said:
Leatherman QC tests their wire cutters by cutting a piece of paper with them. If the wire cutter doesn't cut paper then your Surge is loose. If it cuts paper, then it meets Leatherman's quality test.I just tried that on ST300 and it worked. There is no wobble in the pivot but the pivot easily opens.
One other mysterious thing i am noticing with a Mini Tool is that on some days its really tight to open and on otherdays it just flops open ??? Must be temperature related or something and the metal is shrinking/expanding.
-
Hi,
i'm new here. (obviously :) )
I've been carrying and using multitools since my early teens, starting with classic SAKs, getting a swistool as soon as i heard about it and about 5-6 years ago i also entered the Leatherman world.
I've owned almost every Vic and Leatherman model, selling and giving away most of them along the way. I was selling them mostly to be able to buy and try models i haven’t owned yet and giving them away to my good friends as i always had at least one too many.
And i'm obviously not a collector :)
Back to topic now.
I really adore both Swisstool and Spirit but lack of OHO blades and fine tip needle nose pliers made me think about getting a Leatherman as my EDC.
I owned both Charge AL and Charge TTi earlier but i wasn't too impressed with them and i got rid of them very quickly.
As i never owned a Wave before and there is nothing in my opinion that justifies Charges' extra cost, i got one from ebay. It was USA seller and Wave was intended for USA sell only. At least that’s what was printed on the blister pack.
It was great, solid and rigid, no wobble or misalignment anywhere. I was satisfied with my purchase.
I’ve been carrying it for about two months and all the tools i’ve used worked great.
Then one day I had to cut classic copper braided 1mm2 wire, like the ones in a computer power cable.
You can see what happened in attached images.
I thought something was wrong with my specific tool so I contacted local Leatherman dealer here in Croatia and they replaced it immediately without any questions. Excellent customer service BTW.
Replacement tool was in every respect the same quality as the USA one was.
I was very happy how easily I solved the problem until I tried to cut the very same wire with the new one.
I guess you can assume what happened

I posted the problem on a Croatian forum and guys there told me, I quote: “That’s how Wave’s wire cutters are, cut that type of wire with scissors”.
Although I am quite disappointed I still carry my Wave and I still think it’s a great tool, but hey, Leatherman people, WTF???



-
Welcome to the forum

I have found this very common with fine stranded cables, and not unique to Leatherman. In fact although I don't do a lot of wiring work, I've found very few multitools which handle finer multistrand well, and generally do not expect to get a clean cut. Unfortunately the Wave as you'll know doesn't have particularly robust scissors, so this kind of falls between two stools :-\ Unfortunately there is no single multitool which is perfect at every job, and you have to take a line of best fit in your selection.
Have you thought about pairing this with a smaller tool which might handle the smaller gauge wires better?
-
@markonvs: I encountered the same issue when trying to cut stranded wires with the standard wire cutters on my Surge a few weeks ago. Afterwards I recall reading some where that the Surge has Stranded-wire Cutters and realized I should have used those instead.
Had the opportunity to cut some stranded-wire yesterday and used the Stranded-wire Cutters this time. Went through the wire like butter. Just had to use the right tool for the job...
CB

-
I'm used to make compromises with multis but to be honest this is the one i never thought i will have to make - wire cutters that don't cut wire... :ahhh ...is that too much to expect...
Of course i CAN live without cutting that type of wire with my Wave and i know i can use scissor for that purpose cause i tried and it works but the disappointment of finding out that my "perfect" EDC setup is not actually so perfect...

Anyways, looking forward to the new Surge. Although it's a bit heavy for intended EDC setup i guess it's just another multitool compromise i have to make ;)
-
Stop thinking about making compromises, and focus on the fact it gives you a great excuse to get more tools to
play withtest
:D :D -
I would appreciate any info on how ST300 replaceable wire cutters are cutting stranded copper wire, like the one on my photos attached here.
Thanks in advance!
-
For cutting stranded wire with a significant jacket or covering, I'll often use the serrated blade to just cut the insulation, making a notch. Then I find that the regular wire cutters will handle the finer strands just fine. It seems that the wire's insulation will cause interference of a sort with the cutters.
Just my experience, YMMV.
-
Welcome to MTO, Marko.
Dobro nam došao. :DNice to have another Croat around this place.
The only multitool wire cutters I found consistently bad (and I do mean BAD
) at cutting stranded wire are the ones on the Victorinox Spirit. Fail every time. ::) I generally get good cuts with Leathermans though. I did a quick test here for you with a couple multies and per your request, wire like the one in your photos. I even picked a blue one. :P The best cuts I got with a full sized Swisstool. Others were OK, (except the Spirit ::) ) the Skeletool cut a lot better with the hard wire cutter notch actually but I found that out only after I started uploading the video. :DSorry about the aiming, I was watching through the viewer window of the camera. :)
-
Wow, thanks a lot my fellow countryman :D Hvala na dobrodošlici

This is one very useful video!
I am really surprised by the ease that your charge is cutting that wire. Both of my Waves were cutting like your Spirit. Failed almost every cut. Either they make better pliers for Charges or your Charge is an older batch, from the good old days of quality products :'(
ST300 seems like a decent cutter which makes me want the new Surge even more

-
My Charge's date stamps are February 2008. :D I had a Wave from 2010 I think (sold it this winter) but the cutters were equally good. I don't think I'll be buying one of the new Surges though. I bought one as my first (or second,
I never was sure) multitool but sold it as I never carried it due to it's weight. IT'S HEAVY. Then I missed it and bought another one. Which got sold a couple of months later.
I think I've learned my lesson. :D Me and Suges don't get along. ;)Make sure you try one out at a shop before you buy it. Even if you order from eBay go to a local shop first to get a feel for it. Chipoteka usually has a wide selection of Leathermans on display.
And yes, Dream Point's CS is very good. I had a few problems with them in 2008 but after that they've been nothing but helpful. Last time I ended up chatting over the phone with the manager lady for half an hour. :D Very nice lady.

-
I sold my Surge about 2 years ago for the same reason you sold yours, because it felt too heavy. I regret that decision ever since.
I deliberately wrote "felt to heavy" because if you give it a little thought, 80 grams more on your person is negligible. I think its robustness gives it a heavy look and feel.
I remember carrying my first Swisstool on the belt while i was in military service and thinking about how lightweight it is. Everyone in my unit was impressed with the fact how many tools fit into such small package.
I think nowadays we’ve gone a bit too far counting every gram.
-
True, but those grams add up, the sheath, the bit kit, the extra saw blades and file, ... the weight pulling on your belt ... and you end up with your pants on the floor. :ahhh

:P
(not my legs but they do belong to a member of the staff here we miss very much)
Bag carry should be fine though. ;)
-
@enki_ck said:
True, but those grams add up, the sheath, the bit kit, the extra saw blades and file, ... the weight pulling on your belt ... and you end up with your pants on the floor. :ahhh

I'd rather lose my pants than end up ashamed by not being able to cut some tiny soft wire with my expensive high tech multi tool :P
-
@enki_ck said:
True, but those grams add up, the sheath, the bit kit, the extra saw blades and file, ... the weight pulling on your belt ... and you end up with your pants on the floor. :ahhh
:P
(not my legs but they do belong to a member of the staff here we miss very much)
Bag carry should be fine though. ;)
-
I've cut quite a bit of wire with all of my pliers-based tools, and I've never had any trouble out of any of them save the Wingman. I tend to always use the "hard wire" notch though. Bites right through.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
