Screw Thread
-
Pretty sure that 1/2 is diameter in inches.
8 is the bolt size, and UNC is coarse thread which equates to 32 threads per inch on a #8 bolt; http://www.engineershandbook.com/Tables/uncunfthreadsperinch.htm
My brain will explode if I try to figure out what 3alh means. The closest I could find is that ALH is a Volkswagen diesel engine code. But thats probably not what you are looking at.
I have to go soak my head in a bucket of ice now.
Good luck.
-
@powernoodle said:
Pretty sure that 1/2 is diameter in inches.close, it's the diameter before tapping the thread
-
3A refers to outside threads(class 3 used for closer tolerances) and Left Hand threads.
-
Is this a thread about screws, screw threads, thread-screws, or is someone saying "screw this thread?" :ahhh
-
I'm not that familiar with UNC as generally I come across BSW & ISO threads. I would have said:
1/2" Diameter, Unified Course thread form at 8 threads per inch, Class 3A (defines tolerances) Left Hand ... however 8TPI doesn't sound right for 1/2" diameter
1" diameter, yes maybe - I'd have expected more like 18 TPI at 1/2" ... so maybe I'm missing something -
Thanks you guys!
-
1/2 UNC is 13TPI, 1" uses 8TPI
1/2-8 would look more like an auger than a thread :)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
