Rusty MUT
-
I give all my stuff a wipedown with Marine Tuff Cloth , never had any issues in either fresh or salt water . ( Supposed to be used by the Seals - or so the packaging claims ) .
Chris
-
Heard that polishing can help guard against rust, am not sure on that though.
But if the metal is rusting on the parts you can see, what about in the places you <u>cannot</u> see? The pliers joint will no doubt remove rust when used, but in between handles, the pins, ect...

Now I wonder, how do your SAK(s) hold up at work, or do you carry any?
-
I usually also carry a Victorinox Compact. I have no current pictures of it but it's rust free as well.
Def
-
I think if I needed a Multi for use around salt water , it would be a Clipdraw equipped Spirit , I'd just clip a Spyderco Salt in another pocket . I've never had a problem , did a lot of flyfishing around both fresh and salt . Freshwater rinsing is just part of the end of the day routine .
Chris
-
-
@Syph007 said:
[quote author=Syph007 link=topic=42600.msg683633#msg683633 date=1359483673]I could just be cursed. :D I have some old juice parts that I just wet down and left on my work bench. Lets see if they rust or survive in a few days.
Here are 2 juice pieces I wet down and left on my bench in the shop. One spring and frame piece.
Hi Syph007, that's just 3 days ago am I right ? Curious, was it fresh water or salt water that you used to wet them ? Thanks.

-
Just tap water and left in my shop. Im sure if I didnt leave it wet it wouldnt have gone so fast, but i was trying to show how bad they rust on me.
-
@Syph007 said:
Just tap water and left in my shop. Im sure if I didnt leave it wet it wouldnt have gone so fast, but i was trying to show how bad they rust on me.I had a wave that was quite badly rusted, but that was because I left it in the sheath for a couple of months after using it in salsmurfer environment. I sprayed lubricant on a charge Tti which was the replacement for the wave before I EDC it couple of years ago, till now it has no rust problem. But I do spray it with stuff like RP7 or WD40 every now and then.
-
Just tap water and left in my shop. Im sure if I didnt leave it wet it wouldnt have gone so fast, but i was trying to show how bad they rust on me.
I had a wave that was quite badly rusted, but that was because I left it in the sheath for a couple of months after using it in salsmurfer environment. I sprayed lubricant on a charge Tti which was the replacement for the wave before I EDC it couple of years ago, till now it has no rust problem. But I do spray it with stuff like RP7 or WD40 every now and then.
I was sure I typed " salsmurfer environment" 
-
you did but that word has sal.T.W.A.T.er in it
its just the forum censor software being over efficient :D -
its the swear filter
salsmurfer
hosmurfer:D
hosmurfer is pretty funny though.. .

-
Just tap water and left in my shop. Im sure if I didnt leave it wet it wouldnt have gone so fast, but i was trying to show how bad they rust on me.
I had a wave that was quite badly rusted, but that was because I left it in the sheath for a couple of months after using it in salsmurfer environment. I sprayed lubricant on a charge Tti which was the replacement for the wave before I EDC it couple of years ago, till now it has no rust problem. But I do spray it with stuff like RP7 or WD40 every now and then.
I was sure I typed " salsmurfer environment" 
what's salsmurfer ??? I typed salt water. 
-
@Styerman said:
I think if I needed a Multi for use around salt water , it would be a Clipdraw equipped Spirit , I'd just clip a Spyderco Salt in another pocket . I've never had a problem , did a lot of flyfishing around both fresh and salt . Freshwater rinsing is just part of the end of the day routine .Chris
Ahem... leatherman are you listening???? Spyderco has the H1 rust resistance salsmurfer blades. Why not a rust resistant multi tool? Call it the seabee or something.....
-
I think if I needed a Multi for use around salt water , it would be a Clipdraw equipped Spirit , I'd just clip a Spyderco Salt in another pocket . I've never had a problem , did a lot of flyfishing around both fresh and salt . Freshwater rinsing is just part of the end of the day routine .
Chris
Ahem... leatherman are you listening???? Spyderco has the H1 rust resistance salsmurfer blades. Why not a rust resistant multi tool?** Call it the seabee or something.....**
Or the spirit... :D
-
I spend most of the summer on the beach, so a couple of years ago I posted a thread asking if there were any special saltywater multitools for fishing and even carrying underwater.
Nothing came up.
There were some fishing tools but they were not made out to be any more rust resistant than normal tools.I carry a diving knife in the sea which is pretty salt resistant and used the Micra on the beach. I allways washed it after use, like I do with my diving knife.
It did rust and was pretty much stuck. I cleaned it after the summer and it is OK now.Also look at the CRKT MUK which is designed for boat/fishing use and the steel it is made from (from what I remember from a search I did) is rust resistant. Not a multitool but a multifunction knife.

-
And all them under the sea James Bond movies you see their knives all clean & shiny.

-
I love the MUK although at some point I'm going to have to vet a good sheath made. I'll probably see if Eric from On Scene will do a nice Kydex rig for it, at which point it may become my preferred kayak knife, possibly replacing my current favorite, the CRKT Neckolas.
Def
Sent from my Motorola Atrix digital multitool.
-
I got a leatherman wave around Christmas. The production date is 1112. And it had rust spots new out of the package. Leatherman offered me a "refurbished" tool. Are you serious refurbished?!? Mine is brand new!!! I do like it though. Since then I've ordered one in black oxide.
-
All my Leathermans rust like crazy, I carry a Skeletool CX and a custom D2 steel slipjoint at work, both in the same pocket. My slipjoint never has rust and it's not even considered stainless, the leatherman is covered in rust however. Thinking of getting a Victorinox Spirit for this very reason and ditching the Leatherman.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

