need help with a door
-
Well in the UK you can get plasterboard repair patches, I'm taking a guess that you have drywall?
It's basically a self adhesive mesh patch that you put over the hole and then put one or two coats of filler over the top, allow to dry. then sand smooth and paint.
http://www.insulationexpress.co.uk/Fillers/Plasterboard-Repair-Patches.htm
Cheers
-
If it's damage to the drywall, one of the patches will work well enough, provided it's less than about 6 inches. If it's more than that you will need to cut the hole in a square (or rectangle) and cut a chunk of drywall to fit in it. You might need to cut some wood braces and screw them in to attach the new drywall to. Paint sticks work well for that, and since they usually come free with the paint you are probably going to have to buy to finish the repair job, it saves you a bit of money.
Now on to the important bit- your door was forced in? Are you ok? What happened?
Def
-
Thanks everyone for the advice and thank you Def for the concern. It was not someone trying to break in (kinda), but the damage is all the same. ::) I got locked out and was cooking at the time plus my dog was in the house so in my eyes I really had no choice, but to force it in.
This has happened once before so the damage was some of what got fixed before, but looks like some extra damage was done. I will post a picture so you can get a idea of what happened and how I need to fix it. Thanks guys. 

-
I've seen metal plates used to repair door frame damage like that.
they were about a foot long and 1/4 thick.
it made a very strong door.
-
Good to hear it wasn't that serious. A steel strike plate should secure that nicely, although it would also keep you from managing to break in again. I'd suggest that you also seriously consider an electronic combination lock for the door as well. I have one similar to this on my front door:

I've had it on the door for about three and a half to four years now and I've yet to replace the batteries in it.
Def
-
you can splice in new timber to the frame, it's doable for DIY'ers if you take your time. 45 degree cuts or larger to maximise the contact are for glue and screws (look up scarf joint). You can use steel, but if you do, change the hinges ( if you have two or three standard type?) for a piano hinge.
Next time, unless you have double glazing, break a window, it's quicker, cheaper and easier to replace
That lock is not up top snuff, get a better one, please!
Cheers
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



