4" or 4.1/2"?
-
This question seems to have become one of the first to ask myself when checking out new tools - what size is it? This seems to matter much more to me than who built it and what functions does it have. I stuck with 4" tools for a while, and lately have got a few larger items .... and then not been carrying/using them :-\ I don't have particularly large hands and also tend to pocket carry everything, and the extra chassis size and weight seems to be more of a defecit than a benefit.
Despite that, today I've decided to carry my Gerber Diesel (sheath carried) and though I haven't used it yet it's already made a nuisance of itself. It prodded me in the side when getting in and out of the car, it catches on things (I'm keeping away from heavy machinery with this on :ahhh), and when I went to the loo it pulled the belt from my trousers and slid off onto the floor
The other day I was comparing the Diesel with my BG Strata, which offers all the same tools/functions in a more compact format, plus with outboard tools inc OHO knife, full 3D Phillips and spring opening pliers. Yes the Diesel has larger pliers/knife/saw/file .... but for me there is no significant benefit in that. I don't tend to find myself using a 4" multitool and wish the knife or file was just 10mm longer .... 
The Diesel does seem like a decent enough tool, but much like my Swisstool, Core, Grappler, Schrade Vise Grips, Swissgrip (blah blah blah) is going to see limited use unless strategically located where I'm going to need it. My Core, Swissgrip and DeSTroyer mod were stationed at the boat, which I'm now looking at selling (if I ever get time to finish some stuff on it ::)). My Swisstool lives in my Lowepro Orion Trekker II ... which has hardly been carried this year :-\ The ST6H and 6LC are confined to toolboxes, and the Diesel and Grappler don't see enough daylight either :( I am very happy to have a Super Bear Jaws stashed in the car though ;) :D but it's the smaller framed tools that find their way into my daily routines
So who else prefers the smaller framed tools, and who needs that little bit extra size/grunt and why?
-
The only large tool I have, is a Swisstool... I find that I don't -need- a 4,5" (11,5 cm
) tool, but I don't mind it too much, either, if it's in a good sheath... I don't like the Swisstool sheath too much, though. But, like I said, as I usually belt carry my tools (unless it's made for pocket carry), I don't mind the difference too much.On the other hand, like 50ft, I don't need the bigger, heavier duty tools so much, as I'm really not in an environment where I need them. I like the Swisstool a lot, but not necessarily because it's bigger.
At the end, I guess I don't care too much about size, for a belt-carry tool. I care about how good the tool is, and if they use the space they get in a good way.
-
-
I would not pocket carry anything bigger than a LM Juice. Ideally/usually I would not carry anything bigger than a Gerber Dime in my pocket. (my travel kit)
I just do not like anything that pulls my trousers down.
If I have to have a bigger tool I will carry it in a rucksack.
Usually I will have access to larger tools anyway. -
I find that bigger MTs like the Swisstool or ST300 cannot really be carried, but can only be used at home. At home, I have a variety of better tools for the job.
-
The biggest tool that pocket is a SOG Paratool. I never carry my Swisstool. If I had a slimmer sheath I would probably carry my Wave especially the Original Wave.
I typically carry a tiny multi-tool (Micra, Squirt or Gerber) and something up to the size of the Paratool. I actually like carrying a flat tool compared to a Juice CS. I do carry the Juice occasionally.
-
For me its different mt's/sak's for different jobs,
Surge-maintaince job and diy
original wave-carried in my backpack in maxped mini.
swisschamp,explorer,pst,urban pocket carry
wenger si,tinker,p4,lightweight option.
111mm gak,camping,outdoors.
S4,micra,keychain. -
50ft-trad,
I too am in a similar situation, I used to carry the LM Wave/Charge TTi, and really didn't notice too much about its size until I start to EDC my Swisstool Spirit X. Then from that point on, anything longer than the 4" Spirit starts to become a little too long for me.
In terms of carry method, I work in an office environment and definitely like to carry my MT as low profile as possible. Most of the upright sheath are usually a little too bulky for the task, and like yourself, I found it poking at my sides whenever I am sitting down. So most of the time, I use my own Ranger Band carry method to keep the profile to the minimum and prevent any tool sliding out the belt.
Also worth mentioning is the Skinth sheath shield series, I did give it a try and those with metal clip does hang onto the belt tightly without any sliding, and also it does sit as high as some other sheath, which is good.
-
Even 4" tools are really larger than I (almost) ever need. I can't really think back to a time when i had a small task that a Squirt couldn't handle. But then, I carry a tool kit in my car.
So, absolutely NO need for a 4 1/2" tool for me. Not any REAL need for 4", and probably don't even usually need something as big as a Juice.
However, I do carry the Spirit X, along with my SOG Crosscut. It just hardly ever gets any use.
It's really a matter of personal needs.
-
Interesting question. I started off with an original Supertool and that got carried and used a lot. I'm a building maintenance engineer, I use a multitool pretty much every day and I just don't feel any significant advantage that the 4.5" MTs supposedly offer. So despite owning a few 4.5" MTs I am far more likely to use a 4".
-
Forgot to say about pouches ,I've got a vic pouch that i can fit my swisschamp and solitaire in but same as you Al it digs in my side when sitting :-\ i use chains with a dangler one end attached to a belt loop and a quick realease the lantyard ring end of the mt/sak taxi dad mentioned this method after he sent me the swisschamp and it works a treat as stays up right and seems less bulky
but i do pouch carry while on long walks and camping 
-
@Gareth said:
Interesting question. I started off with an original Supertool and that got carried and used a lot. I'm a building maintenance engineer, I use a multitool pretty much every day and I just don't feel any significant advantage that the 4.5" MTs supposedly offer. So despite owning a few 4.5" MTs I am far more likely to use a 4".I'm glad it's not just me :D
I'm actually trying the Diesel pouch carried again today, but further back. These trousers seem to have the belt loop exactly where I'd like the pouch to stay, so instead it's either sliding too far forward, or alternatively slipping right round the back ::) I'm tempted to throw this tool back in a drawer unless/until I have a specific requirement to have it stashed somewhere strategic. I'm happy enough with the tool, but carrying it is a pain :-\
The flip side is that it's got me half tempted to try pocket carrying the BG Strata a bit (leaving the sheath/light/firesteel at home)
-
Good question Al. I've got a couple of 4 1/2" multis which I don't belt carry, they just come in the car or are with me at home so weight isn't a problem to me. My most used tool is a Swisschamp which is usually on my belt and I don't notice the weight at all. I can't rule out having a 4" multi at some point but I do like the beefier plier head of a bigger tool. Things might well be different if I needed/could carry a multi at work :)
-
morning all, my two cents worth.
I don't get on with pouches for all the reasons mentioned above ! Almost lost my Surge when it slipped off my belt and went under the partition wall of a public toilet 'stall' (panic :ahhh)
I used to pocket carry my wave (with pocket clip attached) but I've stopped wearing Jeans as much these days, I can only wear 'jogging pants' most of the time as any kind of belt is painful on my stomach (health issue , that we don't have time for on this thread)
at least with the arrival of the winter (cold weather) I do tend to have jacket pockets for all my 'junk' !
I've been researching and experimenting with 'man-bags' (bloody good idea, in theory but i'm still not quite there) which brings me to a question ~
"If we have a 'bag', be it backpack, shoulder bag, butt pack or the like, does it matter about the size of a multitool ?"
this is a wild statement (and likely to get me thrown out of MTO ::)) but would I be better off without a multitool and just sorting myself out some 'dedicated tools' (knife, pliers, scissors etc) I can never get my head around people on here who state they keep a 'multiool' in a glovebox or toolbox ! WHY ?
:ahhh
(rant over, think i'm getting way off topic ? sorry Al
)- isn't the idea of a multi or SAK to be something on your person for those times when you 'need' something but can't (or it's simpler not to) go and get a better tool ?
-
@Taxi Dad said:
morning all, my two cents worth.
I don't get on with pouches for all the reasons mentioned above ! Almost lost my Surge when it slipped off my belt and went under the partition wall of a public toilet 'stall' (panic :ahhh)
I used to pocket carry my wave (with pocket clip attached) but I've stopped wearing Jeans as much these days, I can only wear 'jogging pants' most of the time as any kind of belt is painful on my stomach (health issue , that we don't have time for on this thread)
at least with the arrival of the winter (cold weather) I do tend to have jacket pockets for all my 'junk' !
I've been researching and experimenting with 'man-bags' (bloody good idea, in theory but i'm still not quite there) which brings me to a question ~
"If we have a 'bag', be it backpack, shoulder bag, butt pack or the like, does it matter about the size of a multitool ?"
this is a wild statement (and likely to get me thrown out of MTO ::)) but would I be better off without a multitool and just sorting myself out some 'dedicated tools' (knife, pliers, scissors etc) I can never get my head around people on here who state they keep a 'multiool' in a glovebox or toolbox ! WHY ?
:ahhh
(rant over, think i'm getting way off topic ? sorry Al
)- isn't the idea of a multi or SAK to be something on your person for those times when you 'need' something but can't (or it's simpler not to) go and get a better tool ?
Obviously different folks, different strokes but I don't want to carry a whole toolkit in my car and I feel a whole lot better having a multi in the car rather than having nothing. If we follow your line of thinking to it's conclusion, there is no need for a multi at all :D ;)
-
Why ? why can't you carry a 'tool kit' in your CAR ? :ahhh
-
I have full toolkits in the cars, but I also like to have a multitool in the glove compartment too, for ease of access.
-
@Taxi Dad said:
I have full toolkits in the cars, but I also like to have a multitool in the glove compartment too, for ease of access.
but if you had one in your pocket anyway ::)
I have a small one on my keychain.
I never carry any bigger ones in my pocket, for the reasons mentioned previously.
Also if you are sitting down, in a car, it is not easy to get anything out of your pocket.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login