After a new tool!
-
Hi all we'll after only a day here I'm looking for a new tool! I love my swisstool and use it about 4-5 times a day on average it saves me having too lump my toolbag everywhere the only time I go for a dedicated driver or cutters is when doing anything electrical. But it is a bit big! I don't carry it when I'm not at work as I don't really like wearing anything on my belt. I fact when I'm not at work I only have wallet keys and phone!
Really wish I knew where my wave was because I've been looking at the pocket clip for it but even then maybe that would be a tad bulky for jeans carry.
So what would guys recommend? Not really tied to a brand as I don't have any experience with many. Would like something lightweight but heavy duty at the same time. The main part I use on a multitool is the knife because it saves me having to go for the Stanley out my box!!
Oh and looking to spend about 40-50 quid
Sent from my iPad using Tapatalk
-
Leatherman PST, Swisstool Spirit, LM Rebar, LM Sideclip are some that come to mind. If you want smaller perhaps a LM Mini (depending on if the limited toolset and small knife meets your needs).
It is difficult to find an MT that is both heavy duty and lightweight.
-
Why not go for a SAK, if you primarily need the Blade.
e.g.: Victorinox Farmer
-
The other thing that springs to mind is the Skeletool. It definitely isn't as HD as the Swisstool or Rebar but it has a nice OHO knife and is very light weight.
-
The Rebar was my first thought as it's lightweight (6.7oz) and fairly heavy duty. However, since you say the knife is your most used, you may want a one hand opening blade? If so, there aren't many options for lightweight/HD (as far as I know). There is the Skeletool as Cupboard mentioned, but it doesn't offer much for tools and wouldn't be HD. If the knife is all you really want though, it's a good choice. Other than that, you'll have to go up to the heavier/bulkier Wave/Charge/Surge.
Keep in mind this is only from the Leatherman side. I have little knowledge of SOG, Gerber, etc. Victorinox does have the One Hand Trekkers if you don't require pliers or too many extra tools. I have the One Hand Master Road Tour, which replaces the saw of the Trekker with a metal file/saw. Great blades too. There are many other options from Victorinox should you not require a OHO blade.
-
A Wingman or Sidekick are lighter than the Wave line, and have a OHO knife. Quality is lower than a Wave and Swistool but they are still good tools. They both fall significantly lower on the price scale than what you are looking to spend.
-
From SOG, I can't think of anything lightweight (Paratool and PPP are the good ones that I'm aware of) that are heavy duty. There's the Powerduo which would probably be perfect if it was any good, except there seem to be a lot more reports of dodgy ones than good ones which is a shame.
Gerber have the Crucial which is similar to Leatherman's Skeletool, then there's the next size up MP400 series that might be suitable. I think I'd choose the Rebar myself though.
If you don't want pliers then the Leatherman Crater C33t is an option, I've just got one and I rather like it. Sturdy knife with screwdrivers.
The Wingman and Sidekick I'd class as heavier duty than the Skeletool, although the blade is from a thinner stock. As rdub934 says they might do you quite nicely. If you're patient you should be able to pick one up for about £20.
-
You say you love your Swisstool, so I think the Spirit would be the next thing to try. I'll bet you'll rarely miss the Swisstool, as the Spirit capable of doing everything but the heaviest of jobs.
"Pocketable" tools I recommend:
Victorinox Swisstool Spirit
Victorinox Swisstool Spirit X
Leatherman Pulse
Leatherman Rebar
SOG Paratool -
I think the Spirit (and Spirit X), while an awesome tool, might miss due to price.
For shear pocketability, I'd really consider the original Leatherman PST. You can pick them up fairly cheap. No locking blade, but very slim, light, and solid tools.
I might even recommend a Juice, like the S2, used, to bring down the price. Much smaller, but very comfortable pocket carry.
If the blade is the main thing you're looking for, I'd second the notion of a Victorinox Farmer. While the blade is non-locking, they're AWESOME, rock solid tools that are shockingly light (3oz., 86g) , for their toolset.
-
@rdub934 said:
A Wingman or Sidekick are lighter than the Wave line, and have a OHO knife. Quality is lower than a Wave and Swistool but they are still good tools. They both fall significantly lower on the price scale than what you are looking to spend.
I can't believe I didn't think of these, considering they are two of my favorite MTs to carry...
to me on that one. They are good, basic tools with probably all you'd really need, for a great price. -
I would start with a few more questions, how often is a plier used or needed? How important is a one hand opening blade? You mention using cutters for electrical work so that would be high on list? Pocketable since you don't wear anything on your belt also factored in.......
I would tend to agree on the juice line with their small size and good tool set.
The Spirit is an excellent tool and you would be right at home with it since you have the big brother. I'm not so sure pocket carry is ideal with this tool but YMMV. I also recall Enki's video of the wire cutter not performing so great. ( I think I got that right??)
I was thinking the Victorinox Electrician Alox especially if you don't need or use pliers often. This tool however is missing a Phillips driver if that's important.
I really like the Master Electrician with the inline Philips and small plier. Not sure how available it is to you.
The wingman and sidekick are great options and both have nice simple tool sets.
-
@Sparkydave said:
Although I use the pliers a bit the cutters are almost never used as I have to use vde snipsMaybe a Swiss Army knife is the way too go??
Sent from my iPad using Tapatalk
Perhaps so. I guess the best thing to do is figure out what implements you really would like/need and let us know. I'm sure someone here could give you some good suggestions. I think there is also a SAK Selector function here?
-
Victorinox Electrician?
http://www.amazon.co.uk/Victorinox-Electrician-Ribbed-Alox-Silver/dp/B000MLU6QU
-
The great thing is you already have a superb tool in the swisstool and you can have that close at hand while complimenting it with a great SAK as most do anyway. I carry a Swisstool and a Spirit regularly and always compliment them with SAKs. I like the Explorer Plus very much and switch with a Swisschamp and even a Wenger Tradesman. The cadet may even be your cup of tea with its smaller size or the Pioneer if we are staying with Alox. I'd say for blade and some driver usage a SAK can accomplish quite a bit in a small package and you don't have to stick with Alox at all. Heck even a Super Tinker is a terrific SAK offering a lot in 3 layers. If you were in the CONUS I'd shoot you out a recruit to fiddle with.
-
The four that spring to mind are the Leatherman Sidekick, Wingman and Skeletool and the Gerber Octane. All lightweight, have one handed blades, and nothing too flimsy.
Problem with the Sidekick and Wingman might be the fact the small flat driver won't go anywhere near a choc-block terminal. The large flat and Phillips don't lock, but for light use I've not found them a big problem.
Personally I don't like the feel of the Skeletool in my hand, but lots of other people disagree so there is no reason it might no suit you. The flexibility of the Leatherman bits is a bonus, but the fact you can only use the screwdriver with the legs open is a downer IMO (when the Skele is folded the driver is hidden under the carbinier).

I actually really like the Octane HOWEVER the one I got had very poorly finished screwdrivers (large was too fat, small was too thin, Phillips ground to the wrong angle ::)), I sorted them myself but I should really have returned it. Happily I've seen much better examples than mine. :)
All have potential upsides and downsides depending on your needs. Let us know what you decide to go for.

-
Have you looked at the Victorinox Swisstool Spirit X?
It has a similar toolset to the Swisstool and is the same, but is around 3 oz lighter, has curved handles, and is half an inch shorter.

-
Maybe it will be a wingman or sidekick then. As for terminals etc I usually have a terminal driver on me somewhere. Also been thinking of making a little kit up the hospital is huge and it sucks being at one end then doubling all the way back for some pliers or a bit tape
Sent from my iPad using Tapatalk
-
@Sparkydave said:
Maybe it will be a wingman or sidekick then. As for terminals etc I usually have a terminal driver on me somewhere. Also been thinking of making a little kit up the hospital is huge and it sucks being at one end then doubling all the way back for some pliers or a bit tapeSent from my iPad using Tapatalk
I served my time as a maintenance (mechanical) engineer in hospitals.
Yeah, there are a few basics I'd make sure I had on me wherever I was and whatever I was doing, still do TBH. :)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login