Mini driver question
-
Being a member of the Glasses wearing community, I have had occasion to use both.
My experiences are as follows:
SAK mini driver in corkscrew: I like this setup. The driver is detachable and that makes it easy to work with. It tucks away nicely in an implement I don't really use but yet is on pretty much every SAK I own (this in my mind actually makes the corkscrew useful). My only complaints are not all corkscrew equipped SAKs come with one be default and they can be lost easily if you have a clumsy or forgetful moment.
Mini bit driver on LM tools: This one is not bad, provided you aren't using an old model Surge (the tool is way too big for such a finesse operation). I have successfully employed it on my Charge and Wave models. Some consider it a waste of space and to a lesser extent I agree. I have another bit in my bit kit that is small enough to work on the screws of my glasses, so I tend to mod this out of my EDC tools.
It really comes down to personal preference. I tend not to EDC a SAK as much as I do a MT. This means, the LM style (or other small driver like on a Gerber) gets the call.
Also, if the screws on your Glasses are always coming lose or undone, I have had great success with loctite
. -
I think the LM mini driver is useless as it is attached to such a big lump of tool, so I simply add the Vic mini driver to the LM bit-card

-
-
Lmao!!
that's us mobile
-
Vic mini driver is awesome. I use it every day to rearrange the poles of power adaptors for the e-cig. For spectacles also. For cleaning small holes etc.
For the LM I agree, the Surge is to big and heavy to use it precisely. But I like the double bit format. Perhaps Victorinox could update the design with double bits (regular- philips) since they already did that with the Cybertool. -
@Grant Lamontagne said:
Info on Mini Driver

-
I find the LM mini-driver is clumsier to use but acceptable. Then again the Vic will feel clumsier if you're having to use it on a phillips-head screw... but it'll be acceptable, too. Thankfully both get the job done in a pinch, which is the whole point.
It just occurred to me is that it would be quite easy to drill a little hole into plastic bit holder of the cybertool 34 and stick an eyeglass screw in there. Or maybe you could just stick a screw in with the tweezers, though then you'd have to take care not to lose it when using tweezers. Since eyeglass companies are obsessed with putting the screws on the underside of the frames and you occasionally lose them, that might be handy.
Dem
-
I'm good with da Surge. Might be because I have big hands.
that's us mobile
-
@Etherealicer said:
I think the LM mini driver is useless as it is attached to such a big lump of tool, so I simply add the Vic mini driver to the LM bit-cardCan't believe I never thought of that! Now I need to go and scrounge up another Vic mini driver and add it to my bit card.

-
I saw this mod where someone cut a hole in the end of the bit extender to use the LM driver in it. Would that be the best of both worlds?
-
Actually, the Vic mini driver is too thick to work with my glasses. The Leatherman mini driver however works great!
-
On a related topic, I compared the mini driver in the Leatherman Micra to the one in the Wenger Pocket Tool Chest. My glasses have flat head screws. The Leatherman is too big to fit, while the Wenger fits. My wife's glasses have philips head screws. The Leatherman again does not fit, while the Wenger will turn them, but it takes a fair amount of fiddling.
I want to get some Vic mini drivers for my corkscrew equipped knives, but I haven't gotten around to it yet. I wish Vic had this tool on their keychain sized models. It seems like it would be much more useful to have than a cuticle pusher, for example.
-
Well
ther's no doubt who is the Savior 


:D

:o



:ahhh


-
Actually, the Vic mini driver is too thick to work with my glasses. The Leatherman mini driver however works great!
this has been my experience as well. the LM mini driver has saved my vision several times over the years!

It's a life-saver isn't it? :D

it really is!
I can understand how the non-glasses wearing crowd might see it as a waste of space in the tool, but for some of us, it's an essential part of any EDC. :D -
Since using thread locker on my glasses I haven't had any issues at all.
-
Is the new mini driver the one on the left or is that the old one?
-
I always have the Mini Screwdriver in the corkscrew of my Victorinox Spartan - just in case. Another useful gadget/gimmick/tool that I found recently is a set of four small bits in a small driver by Ace Hardware (only about $4). The bits are magnetic and include two Phillips (PH 0 and PH 000) ad two straight slot (1.5 mm and 30 mm). The set has a shirt pocket clip, measures about 3.5 inches long and 0.5 inches diameter and makes nice MacGyver tool to go along with a Swiss Army Knife and a multitool. Very light weight, so I always carry it next to my ball point pens and penlight.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login