Squirt modification
-
Are you kidding me, send something over?
That sounds great!But before I ask something like that I'll check out our office supplies first and see if I can make something work myself. And meassure that pin hole exactly, or are you sure that it is the 3.2 mm I think it is?
-
@zepla said:
.........or are you sure that it is the 3.2 mm I think it is?I can't be absolutely certain, but it would make sense. Leatherman is an American company, and 3.2mm (1/8") is a standard size that pin stock would be available in. The next bigger size would be 3.9mm, the next smaller size would be 2.4mm.
-
I can't be absolutely certain, but it would make sense. Leatherman is an American company, and 3.2mm (1/8") is a standard size that pin stock would be available in. The next bigger size would be 3.9mm, the next smaller size would be 2.4mm.[/quote]
That does make sense indeed.
BTW, thank you all for the support :) I really think now it can be done now in a fashion that it works and looks nice. If everything works out allright with this proto, I'll go out and look for a new sheepfoot ladybug and squirt to modify because the one I have is not perfect anymore. Damn the dremel and my not so steady hand :D
-
Good luck zepla! We're looking forward to seeing your results. :)
-
@zepla said:
Are you kidding me, send something over?
That sounds great!But before I ask something like that I'll check out our office supplies first and see if I can make something work myself. And meassure that pin hole exactly, or are you sure that it is the 3.2 mm I think it is?
Measure the old pin, not the hole. Much harder to measure a hole accurately. If you have a micrometer the exact measurement is 3.175mm or .125 thousands. I am 90 percent certain it is 1/8 inch.
Richard
-
@kent ct said:
... Another thought. How about 1/8 dowel pins. Easy to soften so you can file. Two ten thousands over size so can make a tight very strong pivot. For the ends, two brass bushings which can be riveted into or just Loctite in the bushing. I have spring steel .025 or .63 mm. a bit under 10mm wide, very strong. If you would like to try this I will make the brass bushings and mail you a piece of spring steel the length you need along with the dowel pins which I will soften. Email me if you want to try.
I did some measurements, and it looks like you're right al along! It is indeed the 3.2mm you thought it would be

I looked in every corner of my office and couldn't find enything usefull. It looks like that I'll have to take your offer :D A
is comming your way... -
@kent ct said:
... Another thought. How about 1/8 dowel pins. Easy to soften so you can file. Two ten thousands over size so can make a tight very strong pivot. For the ends, two brass bushings which can be riveted into or just Loctite in the bushing. I have spring steel .025 or .63 mm. a bit under 10mm wide, very strong. If you would like to try this I will make the brass bushings and mail you a piece of spring steel the length you need along with the dowel pins which I will soften. Email me if you want to try.
I did some measurements, and it looks like you're right al along! It is indeed the 3.2mm you thought it would be

I looked in every corner of my office and couldn't find enything usefull. It looks like that I'll have to take your offer :D A
is comming your way...Check your mail
Richard
-
Here's a little update of my squirt mod.
I have contact with Kent, he is going to send me some parts needed for this mod
And I've contact with Marc, from EDC Depot for a new squirt and Spyderco Ladybug. My plans are to make a proto with the squirt and ladybug that I already have (you've seen the pictures) and if everything goes well I'll make a new one with out all the screwing up I did on this one :DNow I'm just waiting for the parts and making plans in my head to make this work. I'll keep you all posted :)
-
Looking forward to hearing more from you zepla :)
-
Yet an other small update of my squirt mod.
The parts from Kent are in
Now I have to figure out how the use them. Of course he explained it perfect, it just my idiot brain that is the problem in this equation :-[I'm going to experiment with this and try some designs I came up with. I'm sure I have something to show for it in a few days. (I do have to work some times and spend some time with the girlfriend in between this important project :D )
To be continued....
-
@zepla said:
Yet an other small update of my squirt mod.The parts from Kent are in
Now I have to figure out how the use them. Of course he explained it perfect, it just my idiot brain that is the problem in this equation :-[I'm going to experiment with this and try some designs I came up with. I'm sure I have something to show for it in a few days. (I do have to work some times and spend some time with the girlfriend in between this important project :D )
To be continued....
I hate it when women and work get in the way of important business! >:( ;) :D
-
They never seem to understand my priorities :D
-
Getting on the way but missing a small drill bit now. Broke all the small ones when trying to make a hole in the springsteel I got from Kent. To bad the shopes are closed now and now my little project is on a hold.
Notice the mess I've made by just fiddling about with a squirt. Imagine what I can do with a larger tool :D
Oh, and just onother thing I would like to mention. I ordered some stuff by edcdepot and payed for it already. Today I recieved a mail from Marc that I get some money back due to a change in shipping costs. And that the package is on its way.
for Marc, a honest guy running a honest shop. I have to say, that's rearly found on the internet these days! -
You need slow speed to drill steel. Can not be done with Dremel unless you use carbide bit. Why not soften steel? You can then do all your shaping and when done re-harden and temper.
Richard
-
Guys like Marc are a rarity these days.
-
bit off topic,sorry:
hey zepla,whats that little tolkit u have there with wrenc,sockets,bits etc?
looks delicious.
SO,where to get a hold of those ?
-
That's a Teng Tool set. (www.tengtools.com) They make excellent tools for reasonable prices and have exactly what I need, like that set you see at the pictures. It is very small but has just what I regulary need for my work. Most of my other tools are from Teng as well. An even smaller set and a bigger set. (no, I don't have stock options in that company ::) )
Funny thing was the first time I had seen this stuff I tought it was just chinees made crap. What did you expect with a name like that
But when I looked closer it looked quit good to my surprise. I did some research and now I know it isn't chinees and comes with a sort of lifetime warrenty and if I need some tool I'll buy Teng. (It helps when you have Teng dealer around the corner in my case.) -
oh its a teng? im familiar to them,at fisrt when i saw your pic i looked at that mini ratchet that looked like ones teng sells.they dont sell tengs here,do u know one in uk(us who sells em ,maybe even overseas.
ive seen those in sweden,just couple weeks ago while i was on large motorcycle happening,teng had a small....tent there and they had set that held some 5 sockets,that ratchet,and some bits,intended for motorcycle use.i looked at that sam kit at 2007 too,but that happening is sooo hot and i have to get lots of beer to avoid dehydration ;),and that stuff eats my wallet.
-
You can try spot anealing the area you want to drill with a soldering iron. I've done it before with marginal results. I was able to drill a hole with a cobalt bit, but the bit was history afterward.
A carbide bit is about the only equalizer for hardened steel. pm me and I can help you get a few for a lot less than the normal $15 or so each.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login