firearms
-
I got to shoot a Remington derringer in .41 rimfire once. It was the classic over/under, and the ammo was actually new manufacture from Mexico. A friend's father has a four barrel .22 Sharps derringer, very cool little piece!

Both of those guns have soooo much of an overdose of cool. They were THE classic pocket gun of their era. My two very favorite TV shows when I was a kid was, Have Gun Will Travel and Yancy Derringer. Actor Jock Mahoney was so cool as the New Orleans gambler/rogue that worked for the Union administrator of the city in post civil war. He seemed tp make a four barrel Sharps appear like magic in his hand. With Paladin, the over under Remington was often used to save the hero's butt.
I guess I've always love the small pocket pistols because they are like the peanut pocket knife. I remember my old man telling me that a pocket knife is something that is carried a lot, but used once in a while. He used that theory to justify why he carried a small Case peanut as his everyday pocket knife. I feel the same way about both pocket knives and pistols. I'm not planning to get into any gunfights, so I don't want to lug a large heavy gun around. But IF something happens, I'd like something to shoot back and create a situation to break off contact and escape.
A coin size pocket knife is good to cut stuff, and a Derringer size gun is good enough to get my butt outa there, but does't take up a lotos space just carrying it.
Hey, it worked for Palidin didn't it????? :D
Little guns and little knives; they've got this old man a long way so far in this life.

Small sized pocket revolver you say?
-
Don't you dare..... -
@Alan K. said:
Yes. Memorial day is a good reason to buy a new firearm. We have a couple hundred years of veterans to thank for our continued right to own firearms.

Very true

Well, I was unable to resist temptation and decided to start the holiday weekend today. Went and picked up an H&K VP9 this morning and was at the range an hour later:

It shoots every bit as well as the reviews say it does, and I see why it's becoming very popular. Now if I only could shoot as close to as well as the VP9 can (lol)
Nice pistol Raistlin. 8) If the pistol already shoots well then at least you have the potential to get better. :D
-
Got my first own K98 this week. It is a norwegian capture that was used in the norwegian navy. Norway chambered it in .30-06 Springfield. When it was reimported to Germany it was rebarreled in 8x57 mm Mauser.
So its an arsenal weapon with a new barrel. I shot it just yeasterday. It can easily be compared to a Swedish Mauser or a Lee Enfield at 100 metres with open sights. Shot it with full-power loads and it worked just fine. It shot like a charm. The typical Mauser-kick gave me a blue shoulder today... LOL ... what a great afternoon yesterday!
-
Awesome! Mausers just flat out rock.
the 98 action is still the standard other commercial actions measure up to. -
Indeed! I do love the system that is used in the old repeating arms. But the Mauser system, due to its third locking lug is the safest firearm system, IMO. The thrid locking log is just for the shooters safety. While the front two logs almost operate in the system/barrel the third one is working at the rear end of it. If the first two logs fail, it prevents the system to jam in the shooters face and kill him/her.
-
Older Mausers use the bolt handle as a third lug. The 93 is an excellent action, and not one that fails. The US M1903 Springfield action is a 93 copy. Still, never hurts having that extra little bit......
-
The one action that has a reputation of throwing a bolt is the Canadian Ross. If put back together wrong, it will fire if not locked...... Still, the only death I've heard of firsthand from a thrown bolt was from an M1895 Lee Navy straight pull.
-
@Alan K. said:
Yes. Memorial day is a good reason to buy a new firearm. We have a couple hundred years of veterans to thank for our continued right to own firearms.

Very true

Well, I was unable to resist temptation and decided to start the holiday weekend today. Went and picked up an H&K VP9 this morning and was at the range an hour later:

It shoots every bit as well as the reviews say it does, and I see why it's becoming very popular. Now if I only could shoot as close to as well as the VP9 can (lol)
Nice pistol Raistlin. 8) If the pistol already shoots well then at least you have the potential to get better. :D
Good point. Although maybe I would have better off going with a Mini-22? :D
-
Yes, I´ve heard about the canadian ross; due to its fails sometimes. But on Model 98, wether G98 or K98 has the third locking lug and the bolt handle. But you are right; the bolt also gives safety; looking at the massive metal construction it is a rather fine and safe design.
I was talking to an AR15 guy lately and we were discussion rather hard on the pros and cons of the old construction vs. the new ones. To my opinion it is always strange for me having too much polymer aka plastic on a firearm. Be it handguns or rifles. Not a big fan of these. To me, nothing beats blued carbon steel and wood. But that´s just personal taste, propably. Not that plastic fan on firearms in general.
I´m curious if the plastic handles will look as good in 100 years as the old treasures do until now... Time will show...

-
A bit of trivia. The U.S. blatantly copied (stole) the Mauser action design for the 1903 Springfield rifle, without permission, and Mauser sued. The U.S. had to pay a licensing fee to Mauser for every 1903 produced, and did so, until the end of WWI.
-
@Humppa said:
Yes, I´ve heard about the canadian ross; due to its fails sometimes. But on Model 98, wether G98 or K98 has the third locking lug and the bolt handle. But you are right; the bolt also gives safety; looking at the massive metal construction it is a rather fine and safe design.I was talking to an AR15 guy lately and we were discussion rather hard on the pros and cons of the old construction vs. the new ones. To my opinion it is always strange for me having too much polymer aka plastic on a firearm. Be it handguns or rifles. Not a big fan of these. To me, nothing beats blued carbon steel and wood. But that´s just personal taste, propably. Not that plastic fan on firearms in general.
I´m curious if the plastic handles will look as good in 100 years as the old treasures do until now... Time will show...

Of course they will not look as good but they can be replaced for like 12 dollars.
-
Ok. I'll throw up a pistol. I've neglected this thread for a while. This one guards the castle....
-
Yes, I´ve heard about the canadian ross; due to its fails sometimes. But on Model 98, wether G98 or K98 has the third locking lug and the bolt handle. But you are right; the bolt also gives safety; looking at the massive metal construction it is a rather fine and safe design.
I was talking to an AR15 guy lately and we were discussion rather hard on the pros and cons of the old construction vs. the new ones. To my opinion it is always strange for me having too much polymer aka plastic on a firearm. Be it handguns or rifles. Not a big fan of these. To me, nothing beats blued carbon steel and wood. But that´s just personal taste, propably. Not that plastic fan on firearms in general.
I´m curious if the plastic handles will look as good in 100 years as the old treasures do until now... Time will show...

Of course they will not look as good but they can be replaced for like 12 dollars.
In 100 years, no one will care about current rifles. Everyone will be buying electronic rail gun long guns :D
-
Yes, I´ve heard about the canadian ross; due to its fails sometimes. But on Model 98, wether G98 or K98 has the third locking lug and the bolt handle. But you are right; the bolt also gives safety; looking at the massive metal construction it is a rather fine and safe design.
I was talking to an AR15 guy lately and we were discussion rather hard on the pros and cons of the old construction vs. the new ones. To my opinion it is always strange for me having too much polymer aka plastic on a firearm. Be it handguns or rifles. Not a big fan of these. To me, nothing beats blued carbon steel and wood. But that´s just personal taste, propably. Not that plastic fan on firearms in general.
I´m curious if the plastic handles will look as good in 100 years as the old treasures do until now... Time will show...

Of course they will not look as good but they can be replaced for like 12 dollars.
In 100 years, no one will care about current rifles. Everyone will be buying electronic rail gun long guns :D
I don't know about that.
Pretty sure someone in 1916 said something along the same lines about the first Wenger knives. Some things are timeless.
-
<-----
knows folks who still shoot ball and powder.
-
@Alan K. said:
A bit of trivia. The U.S. blatantly copied (stole) the Mauser action design for the 1903 Springfield rifle, without permission, and Mauser sued. The U.S. had to pay a licensing fee to Mauser for every 1903 produced, and did so, until the end of WWI.Actually the last royalty payment was made in 1914, just before World War I started. The '03 was basically a copy of the 93 Spanish Mauser we had faced in Cuba and the Philippines, with some 98 thrown in. The main patent issue was for the charger-loading ("stripper clip") system.
-
I'm relearning conceal carry and was used to carrying a Ruger GP100 in .357 magnum so never worried about having one in the chamber or not. Now carrying a semi-auto 9mm Ruger SR9c and not sure why I feel uncomfortable with cock and lock.
World is getting stupid and I know that when SHTF it has to be loaded to be effective. It's just that I've open carried before and those were revolvers, mostly when hunting. Never carried a semi-auto till a month ago. How does one get past the weird feeling? -
@Xelkos said:
I'm relearning conceal carry and was used to carrying a Ruger GP100 in .357 magnum so never worried about having one in the chamber or not. Now carrying a semi-auto 9mm Ruger SR9c and not sure why I feel uncomfortable with cock and lock.World is getting stupid and I know that when SHTF it has to be loaded to be effective. It's just that I've open carried before and those were revolvers, mostly when hunting. Never carried a semi-auto till a month ago. How does one get past the weird feeling?Honestly you may never get over that feeling, but depending on the pistol most have 2 or 3 internal safety mechanisms as well as a trigger safety so unless you actually pull the trigger by accident it's highly unlikely it will accidentally discharge. Another option would be to just get a small revolver. Yet another option would be to get a semi that is hammer fired and not striker fired so you can have one in the chamber and de-cock the gun. First shot would be double action and the rest would be single action. No worry of a spring loaded mechanism giving and having a accidental discharge into your leg, butt, or family jewels.
-
The SR-9c has a manual safety and the trigger safety. The trigger safety is similar to the transfer bar safety in a revolver in that you have to be pulling the trigger or the striker won't hit the primer and it won't fire. Always index your finger until you have acquired your target and especially before reholstering and it is as safe as you're going to get in a modern striker fired pistol and at least as safe as your revolvers.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login