firearms
-
@ColoSwiss said:
Glad things are finally going smoothly!
+100!!!

-
IPSC time again. My next match will be on the 30th of April...which means time to take out the revolver after many months in storage. Also time to give it a little cleaning to freshen it up somewhat.
My competition rig is a 357 Magnum S&W 586 with 6" barrel and Silhouette adjustable sights. The Kleenbore PocKit is a wonderfully compact cleaning tool in case you were wondering.
<a href="http://s145.photobucket.com/user/Chako_photo/media/Chako_photo004/IMG_3088small_zpsqypyglx3.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo004/IMG_3088small_zpsqypyglx3.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>I didn't get a chance to do much shooting. I don't think I did anything during the winter months...this year being quite terrible in the snow and cold dept. Here is my accompanying ammo kit that I take with me. Bottom holds several boxes of ammunition. The top trays are very useful. I really like the speed loader tray which makes loading your speed loaders a breeze. I have 6 Safariland Comp 3, 5 Safariland Comp 2, and 1 Safariland Comp 1 which I do not like using for competition as it is designed for conceal carry.
<a href="http://s145.photobucket.com/user/Chako_photo/media/Chako_photo004/IMG_3089small_zpslnxpsher.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo004/IMG_3089small_zpslnxpsher.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>Not shooting means I didn't have to stock up on much ammunition. I tend to buy enough for me and then replace what I use when I use it. Here are a few photos of my ammo locker.
<a href="http://s145.photobucket.com/user/Chako_photo/media/Chako_photo004/IMG_3091small_zpsrcfeqcp3.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo004/IMG_3091small_zpsrcfeqcp3.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a><a href="http://s145.photobucket.com/user/Chako_photo/media/Chako_photo004/IMG_3092small_zpst3nzbaig.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo004/IMG_3092small_zpst3nzbaig.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
Yes, I still have room for that Fallout Mini Nuke among the ammunition.
Here is a .50 BMG, 223 Remington, .45 ACP, .40 S&W, 9 mm, and 2 3/4" 12 Gauge shell.
<a href="http://s145.photobucket.com/user/Chako_photo/media/Chako_photo004/IMG_3095small_zpsaj6a1900.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo004/IMG_3095small_zpsaj6a1900.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a> -
Have fun!

-
I just did the preliminary build on my future loading bench.
<a href="http://s145.photobucket.com/user/Chako_photo/media/Chako_photo004/IMG_3096small_zpsf89by1wr.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo004/IMG_3096small_zpsf89by1wr.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
Still need to clean up the space, and I haven't installed the drawers yet because I am unsure if I can remove them once installed. I am thinking that could be an issue when it comes time to install the loading presses.
<a href="http://s145.photobucket.com/user/Chako_photo/media/Chako_photo004/IMG_3098small_zps0nlbjafh.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo004/IMG_3098small_zps0nlbjafh.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a> -
Nice! Also love the Mini nuke!
-
@ducttapetech said:
Nice! Also love the Mini nuke!+1 on the Fallout Mini Nuke. :D
All the best at the competitions Dan.

-
Thanks. I may need it! :D
-
Yes, and vacuum cleaners like to ignite with powder in them. Not ideal, but it is the space I have to work in. Guess I will have to be super careful about powder spills. I could always get one of those office chair mats.

-
@Chako said:
Yes, and vacuum cleaners like to ignite with powder in them. Not ideal, but it is the space I have to work in. Guess I will have to be super careful about powder spills. I could always get one of those office chair mats.
There is a certain type of tile that I found in a warehouse some time last year. It actually floats above the current floor and just clicks together. I would toss a lightweight painters mat or something underneath it so nothing gets through the cracks and use those. They were fairly inexpensive (for tile) if i remember correctly. And yes it's real tile.

-
If you go with an office chair mat, slide a large piece of plywood under it. Otherwise the bench legs will break through the mat.
-
Well I went to one of my local RFD's today after some key-mod rail. Now I don't need another rifle at the moment and I have no use at all for a .308, but damn I want this!
-
I participated in an IPSC competition today at the club...and had great fun as always. However, I did have an issue with my Smith & Wesson 586. Every now and then, it would fail to fire a round in the cylinder. This meant that I would have to fire until I hit the round a second time and it would never fail to fire that second time. I did give it a cleaning a few months ago and I was puzzled until someone approached me and asked me if I had cleaned the firing pin and more importantly the hole it goes through on its way to the cartridge. Err...no I hadn't. When I got home, I did exactly that...and found that the carbon scrapper on the Leatherman MUT did the job nicely. It was dirty, and I think there was enough build up that it would prevent a good strike every now and then. At least I do not think they were hard primer strikes. I only use Federal American Eagle 158 grain jacketed ammunition and never had that issue before with the revolver using those factory loads.
This was also the first time I have used the Real Avid Gun Boss Universal Cleaning Kit. I bought it because it is very compact, will service every firearm I use, and well...it is compact. I found that the elastic retention system is a major PITA as putting everything away was difficult. Those elastics fight you every inch of the way. On the plus side, there is everything included in a very compact package. I may have to modify this kit to make it more user friendly.
<a href="http://s145.photobucket.com/user/Chako_photo/media/Chako_photo004/IMG_3747small_zpsisyqjnsu.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo004/IMG_3747small_zpsisyqjnsu.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s145.photobucket.com/user/Chako_photo/media/Chako_photo004/IMG_3748small_zps0wjcylqh.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo004/IMG_3748small_zps0wjcylqh.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s145.photobucket.com/user/Chako_photo/media/Chako_photo004/IMG_3749small_zpss9vkk4lf.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo004/IMG_3749small_zpss9vkk4lf.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
The club had 38 shooters show up. I have noticed that IPSC is on the increase as more and more folks want to compete using handguns. We started at 10 am sharp and ended around 3:30 pm due to only having 2 lanes in use. The club is thinking of increasing the lanes by 1 to decrease the competition time. We had an American border guard show up with a revolver...so I wasn't the only person competing in the revolver class. The rest of the club shoot semi-autos.
-
I been honing my skills on Joe Biden's special
https://youtu.be/eduqHcOpIyU -
Not sure where to put this as it is gun related..but not a firearm.
I found this at a local pawn shop. It is a prop gun used in one of the local movies produced in the Sault...or so I was told. It wasn't terribly expensive, and didn't care much about the back story...if it is true. I bought it because I can display it on a wall and have no fear of breaking the law.
<a href="http://s145.photobucket.com/user/Chako_photo/media/Chako_photo005/IMG_4422small_zpsdfvqbynw.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo005/IMG_4422small_zpsdfvqbynw.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s145.photobucket.com/user/Chako_photo/media/Chako_photo005/IMG_4424small_zpsq6ldfdan.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo005/IMG_4424small_zpsq6ldfdan.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s145.photobucket.com/user/Chako_photo/media/Chako_photo005/IMG_4426small_zps0hosmgng.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo005/IMG_4426small_zps0hosmgng.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
I guess this is a cap gun considering the cartridges appear to accept a cap.
<a href="http://s145.photobucket.com/user/Chako_photo/media/Chako_photo005/IMG_4427small_zpssnkkiosc.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo005/IMG_4427small_zpssnkkiosc.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>As a decorative piece, it should do the job nicely.
-
Hey Dan, long time no see mate.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
