firearms
-
I participated in an IPSC competition today at the club...and had great fun as always. However, I did have an issue with my Smith & Wesson 586. Every now and then, it would fail to fire a round in the cylinder. This meant that I would have to fire until I hit the round a second time and it would never fail to fire that second time. I did give it a cleaning a few months ago and I was puzzled until someone approached me and asked me if I had cleaned the firing pin and more importantly the hole it goes through on its way to the cartridge. Err...no I hadn't. When I got home, I did exactly that...and found that the carbon scrapper on the Leatherman MUT did the job nicely. It was dirty, and I think there was enough build up that it would prevent a good strike every now and then. At least I do not think they were hard primer strikes. I only use Federal American Eagle 158 grain jacketed ammunition and never had that issue before with the revolver using those factory loads.
This was also the first time I have used the Real Avid Gun Boss Universal Cleaning Kit. I bought it because it is very compact, will service every firearm I use, and well...it is compact. I found that the elastic retention system is a major PITA as putting everything away was difficult. Those elastics fight you every inch of the way. On the plus side, there is everything included in a very compact package. I may have to modify this kit to make it more user friendly.
<a href="http://s145.photobucket.com/user/Chako_photo/media/Chako_photo004/IMG_3747small_zpsisyqjnsu.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo004/IMG_3747small_zpsisyqjnsu.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s145.photobucket.com/user/Chako_photo/media/Chako_photo004/IMG_3748small_zps0wjcylqh.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo004/IMG_3748small_zps0wjcylqh.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s145.photobucket.com/user/Chako_photo/media/Chako_photo004/IMG_3749small_zpss9vkk4lf.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo004/IMG_3749small_zpss9vkk4lf.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
The club had 38 shooters show up. I have noticed that IPSC is on the increase as more and more folks want to compete using handguns. We started at 10 am sharp and ended around 3:30 pm due to only having 2 lanes in use. The club is thinking of increasing the lanes by 1 to decrease the competition time. We had an American border guard show up with a revolver...so I wasn't the only person competing in the revolver class. The rest of the club shoot semi-autos.
-
I been honing my skills on Joe Biden's special
https://youtu.be/eduqHcOpIyU -
Not sure where to put this as it is gun related..but not a firearm.
I found this at a local pawn shop. It is a prop gun used in one of the local movies produced in the Sault...or so I was told. It wasn't terribly expensive, and didn't care much about the back story...if it is true. I bought it because I can display it on a wall and have no fear of breaking the law.
<a href="http://s145.photobucket.com/user/Chako_photo/media/Chako_photo005/IMG_4422small_zpsdfvqbynw.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo005/IMG_4422small_zpsdfvqbynw.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s145.photobucket.com/user/Chako_photo/media/Chako_photo005/IMG_4424small_zpsq6ldfdan.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo005/IMG_4424small_zpsq6ldfdan.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s145.photobucket.com/user/Chako_photo/media/Chako_photo005/IMG_4426small_zps0hosmgng.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo005/IMG_4426small_zps0hosmgng.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
I guess this is a cap gun considering the cartridges appear to accept a cap.
<a href="http://s145.photobucket.com/user/Chako_photo/media/Chako_photo005/IMG_4427small_zpssnkkiosc.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i145.photobucket.com/albums/r207/Chako_photo/Chako_photo005/IMG_4427small_zpssnkkiosc.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>As a decorative piece, it should do the job nicely.
-
Hey Dan, long time no see mate.

-
Thanks Gareth. I was away with other interest for a bit.

-
hello everybody! Anyone home? 
-
I have a new baby. It will be my last for a while, revolvers are expensive. I have wanted this exact gun for years.


-
I'd say you have very good taste in firearms......

I had a local smith do an 'action job' on this one. It was nice before, but fantastic now.

-
We, the largest part of Europeans, can't even imagine having a gun at home just like that... :/
-
@gdoolittle said:
Do you carry yours?I do.
I thought it might be too big to carry, but I have a nice IWB holster and it carries surprisingly well.
Out of the box, the trigger pull was close to 11#. After the action job it was closer to 8-9# (I don't remember exactly, but will measure it if you want.) And it felt smoother, too. S&W can build a nice firearm.
Congratulations on getting one heck of a handgun! Those grips are sweet!

-
@Mechanickal said:
We, the largest part of Europeans, can't even imagine having a gun at home just like that... :/Well, Mechy, Europeans can't be trusted with firearms. Just one of those stark realities. Even locking knives seem questionable in the hands of Europeans. You guys are just that wild and unpredictable. Which is kinda cool if you think about it. 8)
-
@gdoolittle said:
Do you carry yours?
I do.
I thought it might be too big to carry, but I have a nice IWB holster and it carries surprisingly well.
Out of the box, the trigger pull was close to 11#. After the action job it was closer to 8-9# (I don't remember exactly, but will measure it if you want.) And it felt smoother, too. S&W can build a nice firearm.
Congratulations on getting one heck of a handgun! Those grips are sweet!

I have been carrying it owb with either a galco silhouette or desantis thumb break for about a week and no one has noticed that I know of (except when I open carried of course, but not many people even notice that, haha. Its getting a little warm for owb so I have a galco Summer Comfort iwb on order for it. Holsters for the 3” barrel are hard to find.
-
This is how I have been carrying with the Galco. I have to put the belt over it to get it to sit tight to my side.

-
I've got a basic holster for the 3" barrel. Made by Simply Rugged. A basic holster, but I love it. And surprising effective.
I like your high carry Galco.

-
Wait a minute can I get in here too?!
Gotta Love the Snub!

Sent from my iPhone using Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

