firearms
-
So when do you actually get the chance to shoot one Dan?
-
Sunday, but I can only use my 10/22 as its the only one not on the restriction list.
Got myself a nice Cimmaron Plinkerton single action revolver in .22LR. It was very cheap...and should be a good entry level revolver.
-
@Chako said:
Sunday, but I can only use my 10/22 as its the only one not on the restriction list.Got myself a nice Cimmaron Plinkerton single action revolver in .22LR. It was very cheap...and should be a good entry level revolver.
Very cool. I love single actions and it will be endless fun chambered in .22. If you end up doing any target shooting I would recommend getting some of these. They are sticky targets that you can put on your original target that you set up. They are great because you can very easily identify where you are hitting because the hole turns yellow. Another good things is they normally come with small black stickers that you can cover up the holes with and then keep using the same target. If it gets to shot up you can just stick another full target over the last one and your good to go.
I do not know how they will do it at your range, but around here if you do not have your own targets they will charge you per target and it adds up quick. If you use the stickers you can (depending on what your shooting) use a single target all day. I also will set up some of the small black dots around the outside of the target (maybe 20-30 of them) and have a bunch of tiny targets to shoot at. The cheapest I have found them is at Walmart.
You might already know about these. If so disregard everything I just said. :D
They are called "Shoot.N.C" targets.
Not my pictures.
This is what they look like.
This is what they look like when you shoot them.

http://farm8.staticflickr.com/7445/11376774483_5135dfb106.jpgYou can see some of the small black dots covering up some existing holes. If it gets to bad you can just slap another whole target over it.

http://[](http://s1142.photobucket.com/user/krazeeye/media/Shoot n See/SnCReal-600.jpg.html) -
-
Funny you would say that captain spaulding, I just bought myself a bunch of those today. :D
Yep, I know Mr. Whippy. For the price, it will give me a feel for a single action revolver and if I don't like it, I didn't waste much money. If I do however, I can see myself upgrading.
EDIT: Forgot to add that I also bought more ammunition. 2x525 Remington Golden Bullet Packs of .22LR, 2x50 Barnaul 9mm, 2x50 Lellier & Bellot 9mm, and 2x50 Remington UMC 9mm.
That should give me 2550 .22LR rounds, and 1200 9mm rounds so far.
-
@Chako said:
Funny you would say that captain spaulding, I just bought myself a bunch of those today. :DYep, I know Mr. Whippy. For the price, it will give me a feel for a single action revolver and if I don't like it, I didn't waste much money. If I do however, I can see myself upgrading.
EDIT: Forgot to add that I also bought more ammunition. 2x525 Remington Golden Bullet Packs of .22LR, 2x50 Barnaul 9mm, 2x50 Lellier & Bellot 9mm, and 2x50 Remington UMC 9mm.
That should give me 2550 .22LR rounds, and 1200 9mm rounds so far.
1200 rounds of 9mm!
I know where I am going to shoot when I get my CZ.
-
I used to have a CZ85 that had been mildly worked over, nothing major, just a little fitting and polishing. Was a nice gun, but I only used it for one shoot, Steel Challenge, and my 1911 with super light loads and light recoil spring shot the match just as well. Sold the CZ and put the money towards my Bianchi Cup revolver.
Did someone say revolver?

Funny, you never think about it until it's too late, but I have got very few pic's of my handguns.
In fact, this it the only one of the Bianchi cup revolver.From what I remember its makeup went something like this.
S&W 686-3
Slab sided match barrel
Custom machined scope base with barricade wings
Tasco PDP4 with 5 MOA dot
Full trigger job including double action only, trigger over-travel stop, cylinder indexing, ball locks, bobbed hammer and checkered trigger face.
Welded on beavertail, checkered backstrap and made for my hand ortho grips with base plate for prone shooting
(The sticking plaster around the barrel stops it sliding up/down the barricade.)
Ammo was 137gn teflon BNWC (button nose wad cutters) loaded in 38spl cases to 950fps giving a 130 power factor (min 125) but staying subsonic for better accuracy.
38spl cases were used for positive case ejection.On a calm day (if I did my part) it could put down 50mm (2 inch) groups at 50 meters
It was a MACHINE.My Police and Service match revolver was a stock 38spl Model 14 S&W (match rules) with allowed mods of
DAO trigger job and ball locks, Millett sights.

My LOUD FUN gun was a S&W Model 29-2 44 Magnum with 1x25 LER Tasco scope.
It may or may not have gone on a few hog busting trips ::)
My 1911. A blue over nickel Series 70 Colt Govt Model with Chip McCormick Trigger/sear/disconnector, hammer and beavertail, Millett sights or occasionally a PDP3.
All gently gunsmith massaged into a nice shooting .45
not a bad looker either
-
Nice revolvers.

-
Lovely wheel guns mate! :)
-
Very nice!
I'm curious - why the bobbed hammers on the match revolvers? The only reason I can think of is so they don't potentially hang up on a holster when drawn. -
Chako, let me know how that Plinkerton works out if you get one. I've had an eye on one for a while, and when budget allows, I think it might be next on my list. If they're not total garbage, and I've herd mixed reviews, then might be worth it for me. I love old cowboy style revolvers, and like you, figure a low cost entry would let me see if I like shooting one enough to justify a Ruger Singe-Ten down the road.
-
@jerseydevil said:
Very nice!
I'm curious - why the bobbed hammers on the match revolvers? The only reason I can think of is so they don't potentially hang up on a holster when drawn.PTRSAK may or may not see your post.I'll attempt to answer your question JD.He mentions it in his post,DAO means double action only.These guns are shot double action only,so there is no need for the spur on the hammer.It also lightens the hammer and theoretically allows a faster hammer fall/lock time.You'll also notice that the face of the trigger is rounded,which is also an indication this gun is set up to be fired in double action only mode.
-
I didn't notice his mention of DAO. I can assure you, I know what it means. :DHere's a trivia question for you folks talking about single action revolvers. Traditionally, wheelguns like the Colt SAA have the loading gate on the right side of the frame, making them effectively left-handed for loading. Why?
-
@jerseydevil said:
I didn't notice his mention of DAO. I can assure you, I know what it means. :DHere's a trivia question for you folks talking about single action revolvers. Traditionally, wheelguns like the Colt SAA have the loading gate on the right side of the frame, making them effectively left-handed for loading. Why?
For easier reloading in the saddle?
-
Kirky for the win!
A cavalryman would have his reins in his left hand, keeping his right free for his saber or revolver. The handgun would be switched to the left hand when reloading. -
@jerseydevil said:
Kirky for the win!
A cavalryman would have his reins in his left hand, keeping his right free for his saber or revolver. The handgun would be switched to the left hand when reloading.I actually knew that one as well. Honest. :D
-
I went to the local gun store...and took a very hard look at their shotguns. After trying all sorts of guns from tactical to very long barreled birders, I ended up with this.
This is my first shotgun. I chose it because it was the most comfortable in hand, and the pull felt just right (I even tried youth shotguns). It is a Remington 870 SPS SuperMag Turkey/Predator with scope.
I was originally looking at black tactical shotguns, but this one just felt right in the hand. Many of the tactical shotguns came with improved cylinder only. After much consideration, I wanted something a bit more generalist. I know that a Turkey/Predator gun is rather speSmurfpillst, but I can change the choke tubes on this. This one comes with an extra full choke, meaning tight patterns out to 40 or 50 yards. I asked if I could buy a few different chokes, and the gun shop didn't have any in stock.
I would like to add an improved cylinder for slugs...or is that the best choke for slugs and buck shot? My knowledge is a bit wanting, as I researched tactical models...but when I held this one, I just knew this was the one for me. Go figure, and I hate camo on a gun. I guess I prioritized feel and comfort above looks. I can live with the camo.
Now because this did not exactly meet my ammo capacity needs, I also got an extension tube. Here it is with the extension tube.
Yeah, I think that will do nicely.
-
Very nice!
I'm curious - why the bobbed hammers on the match revolvers? The only reason I can think of is so they don't potentially hang up on a holster when drawn.PTRSAK may or may not see your post.I'll attempt to answer your question JD.He mentions it in his post,DAO means double action only.These guns are shot double action only,so there is no need for the spur on the hammer.It also lightens the hammer and theoretically allows a faster hammer fall/lock time.You'll also notice that the face of the trigger is rounded,which is also an indication this gun is set up to be fired in double action only mode.
^^this, also it looks cool as catsmurf
-
Here you go Dan, problem solved.


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

