how do ya sharpen?
-
Spyderco Sharpmaker

-
Manually .... unless it needs reprofiling, then I'll use a Lansky system or Worksharp
-
Cool I'm gonna look into those. I have 0.0 luck with stones or steels, what do you think of those diamond shapeners
-
I've had great results with the Lansky system.
I'm not great at sharpening freehand, but am getting better at it...... -
Freehand is the way to go if you can build up the confidence, Tom
The reason is that no matter how hard you try, you'll never be consistent on each pass, which will lead to a convex edge - the best edge you could hope for :D It's one of the few things in life where not being perfect makes things better.Tip: If you can learn to steel an edge, even better. Once you've mastered steeling a knife, do the same on an abrasive and you're set for life

-
I watch a butcher while he is gutting/skinning our animals, and the way he explains using a steel is to act like you are shaving the steel or something? Then does it freakn quick.
-
I use a stone meant for my skates, freehand. It works pretty damn good and I'm far from a skilled sharpener.
-
I also use the spyderco sharpmaker.It´s simple and I get very good results most of times. But I have no experience of the other systems out there. Except freehand off course wich I´m not that good at.
-
Always by free hand. Sand paper and mouse pad for my convex edged blades and a diamond hone for my straight edged blades and always finish on a leather strop with sharpening compound for both. Hair shaving blades!
-
I do all my sharpening freehand, it takes a combination of angle and pressure to get it right. On my kitchen knives I use a whetstone, medium & fine grits, then give a touch on my steel, as for my Leathermans and SAKs, they don't get half the abuse of my kitchen knives do, so I normally just have to use a daimond hone, fine & extra fine grits. I want to get a leather strop soon to see just how sharp my tools can really get.
-
Lansky for my folders and smaller blades and freehand for my bigger knivies, tomahawk and axes.
Nate
-
@jerseydevil said:
I've had great results with the Lansky system.
I'm not great at sharpening freehand, but am getting better at it......+1
I'm with JD
-
Sharpen; freehand with a stone, the bigger the better, I have mill stone, soft and hard Arkansas, diamond blocks and more types of aluminum oxide axe and scythe blocks stones and pucks than you can count.
Finish by stropping on corrugated cardboard across the ridges not with them. This is a technique I picked up from someone at Blackjack knives. Cardboard is just abrasive enough to polish up a true razor edge. Works almost as well as a traditional barbers strop. Works well on Vic Trekkers serration pattern too.
For Quick touch ups on work blades/in the field I use a smiths pocket pal x2.
For major work out comes the WorkSharp, great for fixing a truly bad grind, damaged edge, or if you make knives.
-
Spyderco Sharpmaker 100% awesome
-AdmSlc
-
I do my sharpening free hand on a bunch of different sharpening stones and files.
-
spyderco triange sharpmaker rules.
-
I started off the the Lansky, but have since moved to doing most of my sharpening on a really cheap four sided diamond block. It's really easy to use, and quick too. Much less fiddly and irritating than the Lansky.
I bought it to sharpen the Mora I was given and have found I prefer using that for all my knives. Was only £10 too.
-
@Cupboard said:
I started off the the Lansky, but have since moved to doing most of my sharpening on a really cheap four sided diamond block. It's really easy to use, and quick too. Much less fiddly and irritating than the Lansky.I bought it to sharpen the Mora I was given and have found I prefer using that for all my knives. Was only £10 too.
pics please??

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

