Puma-Werk Frogman
-
So I have happened into a pretty cool knife, though by pretty awful circumstances unfortunately. My grandfather's health has deteriorated very quickly and he can't go back home. Today we had to clean out his house a bit, and found the knife laying in the basement.
I know absolutely nothing about it, or the company. Does anyone know what I actually have here besides a cool blade? I know it's missing the handle, but still didn't seem like something to leave sitting there.
Sorry for the bad pictures


-
Puma is a very highly regarded German knifemaker and there are while websites dedicated to collecting them. I have an old White Hunter but I really don't know too much more about them than that, and not much about your blade.
I do know that in 1964 Puma started Rockwell trying each and every individual blade, so look for a small divot somewhere on the tang, most likely on the blade side of the guard. If your knife has one it was made after 1964, if not then it was made before that.
No matter what, that knife is a real keeper. What a beauty!
Def
Sent from a digital multitool
-
Thanks boss!

My Grandfather served during Korea, so there's a chance he had acquired it during this time because he really wasn't much of a knife guy. All I've gotten from research is that it was a dive knife. I'll check for the mark when I get back home Tuesday, as I'm sure you can guess that would not really be welcome in a dorm room!
I have to figure out what to do with the handle......
-
If I were you I would contact one of the more skilled knife guys here on the forum and get something like a nice micarta handle made for it- yes it's modern but it would be an excellent material for a dive knife, and yet can look similar to a nice wood grain when done properly. I would think that would compliment that knife beautifully.
In fact, if you were ever to decide you wanted to part with it I'd be very interested, although knowing it was your grandfather's I certainly understand if you didn't.
Def
-
@Grant Lamontagne said:
If I were you I would contact one of the more skilled knife guys here on the forum and get something like a nice micarta handle made for it- yes it's modern but it would be an excellent material for a dive knife, and yet can look similar to a nice wood grain when done properly. I would think that would compliment that knife beautifully.In fact, if you were ever to decide you wanted to part with it I'd be very interested, although knowing it was your grandfather's I certainly understand if you didn't.
Def
If I were to part with it, I wouldn't want anyone other than someone like you to have it, though you're right as I will likely never part with it.
My uncle is a fantastic wood-worker, so I was thinking of asking his opinion as it will never see water again. The only thing is how to actually get the handle on. The guard swivels allowing you to use it however you gripped it, and the original handle was round but there isn't any way to take the butt-end off to slide a new handle on.
-
Some interesting info here:
http://www.classicpumaknives.com/?p=487
It looks like the handle was some kind of plastic, resin or phenolic originally. That should have been some pretty indestructible stuff- I wonder how/when it got lost?
As for attaching a handle, I'd probably do two slabs and pin them together around the tang, but that's just me.
Def
-
For the fun of it, here's a photo of my father's old Puma next to a Grohmann belt knife. I actually gave my father a Grohmann identical to the one in the photo, which is why he gave me the Puma. The Grohmann in the photo was a gift to me from a bunch of forum members a few years ago.
<a href="http://s253.photobucket.com/user/Multitooldotorg/media/Grohmann03.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://gallery.multitool.org/pbmirror/Grohmann03.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
These are two knives I will never let go of, so I understand exactly how you feel. :D
Def
-
Both your Puma Knives are awesome.
Higgins

check the guard for a stamp.
http://www.knives.com/knives/history/115-puma-knives.html
http://www.pumaknifeman.com/GuideToCollect1.html -
That was my thought as well, but I don't really know what I'm talking about :D, thanks a ton for the link that's awesome. I read that they were also issued for the military and was set apart by a matte black handle. But I have no way of knowing since I have none hahahaha. I have some maroon trex material(the decking material) that I was debating, but I think this knife might be too nice to do that.
It really is kind of baffling, it had to have split and came off, but that would take some serious effort to crack that bad. The blade looks like it definitely got used, but that really doesn't bother me. I look forward to putting a nice edge on it, I may actually use it.(hopefully that doesn't make you cringe)
Those are both beautiful blades man, the Grohmann looks like an extremely useful blade, are those easy to come by?
-
@Aloha007 said:
Both your Puma Knives are awesome.Higgins

check the guard for a stamp.
http://www.knives.com/knives/history/115-puma-knives.html
http://www.pumaknifeman.com/GuideToCollect1.htmlI'll have my dad check it tomorrow, I wish I knew how interesting it was before I left and I would have snapped a bunch more pictures. Really long smurfy day so my head wasn't in the right place :-\
You guys are the best hahahaha
-
Sorry to hear about your Grandpa, keep your head up brother.
-
@Aloha007 said:
Sorry to hear about your Grandpa, keep your head up brother.Thank you buddy, I appreciate that. I found his "yearbook" from when he was in Basic training too, it's pretty cool. Nobody wanted it so I made sure I grabbed it, some of the pictures are just too cool.
I'm really looking forward to restoring this in his honor, and I knew coming to you guys was the best idea to get started!
-
Grohmann is a knife manufacturer about a hundred kilometers away from me so they are fairly common around here. I know a few guys in the US and UK have Grohmann knives too so I'd imagine they are fairly readily available most places. Cold Steel even makes a copy called the Canadian Belt Knife.
Def
Sent from my smurfing hunk of techno sorcery
-
@Grant Lamontagne said:
Grohmann is a knife manufacturer about a hundred kilometers away from me so they are fairly common around here. I know a few guys in the US and UK have Grohmann knives too so I'd imagine they are fairly readily available most places. Cold Steel even makes a copy called the Canadian Belt Knife.Def
Sent from my smurfing hunk of techno sorcery
Just looked both up, the Cold Steel is just a weeee bit more affordable
. But I know the quality would likely be a stark contrast, I'm going to keep them in mind. Do you use it much? -
It is one of my favorite woods knives. The only drawback to it is the deep pocket sheath that u don't really care for. Otherwise the handle and blade shape are very intuitive and natural in use.
The Cold Steel version is actually not that bad either. Admittedly it is somewhat cheaper but the textured plastic handle provides a bit better grip than the polished wood, and is also much more water resistant. It might not be as classy or traditional as the original but in some ways it is actually better- largely because you don't have to worry about maintaining the wood, and if you lose it somewhere it's less costly to replace.
But, living where I do, and being a proud Canadian I prefer the Grohmann. It's like having a classic car and the modern version. The modern one will outperform the original several times over, is more reliable and costs less than the original, but the original has the style and is just so much more of a pleasure to own and use.
Def
Sent from my smurfing hunk of techno sorcery
-
@Higgins617 said:
So I have happened into a pretty cool knife, though by pretty awful circumstances unfortunately. My grandfather's health has deteriorated very quickly and he can't go back home. Today we had to clean out his house a bit, and found the knife laying in the basement.I know absolutely nothing about it, or the company. Does anyone know what I actually have here besides a cool blade? I know it's missing the handle, but still didn't seem like something to leave sitting there.
Sorry for the bad pictures
A bad way to get such a cool knife.
I bet the handle is around somewhere.
your granddad might have taken it off to clean it up or something.
It's definitely worth taking a look for
-
@Grant Lamontagne said:
But, living where I do, and being a proud Canadian I prefer the Grohmann. It's like having a classic car and the modern version. The modern one will outperform the original several times over, is more reliable and costs less than the original, but the original has the style and is just so much more of a pleasure to own and use.Def
Sent from my smurfing hunk of techno sorcery
I totally agree with this, I look for the character since 9 times out of 10 it really isn't a make or break situation when I'm using my tools. I want something that makes me happy to use, something interesting. Not necessarily the best tool for the job. Which is another reason I'm excited to find this knife.
-
Higgins
You could try making a handle from self amalgamating tape, it would make the knife useable without damaging the knife and not too hard to remove in the future

-
If I had that, i would make a handle out of leather washers.
-
The problem with leather washers is that there's no way to get them on. The guard and pommel don't come off so there's no way to thread them on.
Def
Sent from my smurfing hunk of techno sorcery
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login




