Archery.
-
I've never seen a bow like that liberty.
Its Pretty awesome Chako

-
I thought someone posted some information about that Liberty bow in my welcome thread? Or something like that?
Any photos from your archery practice of the bow in use? From shoots?
Action photos are always great.I am apparently going to learn how to make a recurve bow from scratch this year. So excited.
-
@Megan said:
I thought someone posted some information about that Liberty bow in my welcome thread? Or something like that?Any photos from your archery practice of the bow in use? From shoots?
Action photos are always great.I am apparently going to learn how to **make a recurve bow from scratch **this year. So excited.
You should use yew, it's stronger...

-
Yes, that would have been me.
As for photos...surprisingly enough, I never mixed archery with photography...probably because I din't want to haul around a camera while shooting.
-
Here is a third bow...this one is an APA Black Mamba MX1 in target flame red. Can you tell I like the colour red.
This one is fairly decked out, and is a tack driver. When I had this one dialed in, I was in serious danger of Robin Hooding my arrows...which is never a pleasant thing to do in reality as it cost you a lot of money each and every time it happens. Reason why you move to 5 single spot targets as opposed to only one.
Yes, the last time I took this one out to the range was in 2013. I try to use one bow for a season if possible to remain consistent.
I went all out on the sight for this one...a lovely Sure Loc in matching red hardware.
APA is a Canadian bow manufacturer. They make some really interesting bows. For example, the riser itself contains a built in hand carrier, broadhead wrench, knock adjuster, blade sharpener, and a pair of fang like protrusions that allow you to hang your bow on a tree limb quite nicely.
Their limb graphics on their target bows are also nice.
The model number is engraved into the limb pockets. I took a look on their website and they no longer make this model.
I like to use a 4X Viper Archery scope on this bow.
Like my Hoyt recurve, I also went all out on a V stabilizer.
To round the red is everything set, a nice Scott target mechanical release.
For arrows, I use the same ones that I use for the recurve, except these feature vinyl fletching.
-
Now the next one I have is an oldie, but I have kept this due to sentimentality. This was my Dad's good target bow back when we started. In fact, this was his second bow, and I can recall the day he gave it to me because he could no longer pull it.
By today's standards it is a beast. The Martin Onza came out in the 80s and disappeared around the early 1990's. We started archery a few years later, so at the time, it was a not that old used bow that my Dad picked up because he loved Martin.
Now when I first started archery, folks did not have carbon arrows, so archers tried to eek out every ounce of poundage they could muster to get faster and flatter trajectories. This Onza is no different in that it came with a built in overdraw, meaning you could shoot lighter shorter arrows and still keep your spine stiffness where you needed it to be. Likewise, this is an 80 pound bow. Plenty of older bows used by 3D target shooters of the time had high poundage. These days, with modern construction and technology, nobody need to be shooting such high poundage. But back in those days, large overdraws and high poundage was the key to remaining competitive.
Anyways, I had forgotten that I was bored one day back in 94 and decided to paint the case. I am surprised it still looks so good.
Still got a complete set of vintage Easton Autumn Orange XX75 2113 aluminum arrows for it. They haven't made these in years.
A quick look online also shows they no longer make this bad boy sight. This is a double pin Toxonic target sight. This allows you rotate the sight 180 for straight pin or scope.
Here is the built in overdraw.
At the time, Martin had these beautiful laser engraved wooden decorations on their bows.
Beautiful wooden grip.
This is such a classy bow, right down to the limb graphics.
And here is the bow in its entirety.
So although I gave away most of my older gear, I am keeping this one.

-
And to try and keep this away from a gear only topic...
One of the best Archery history websites around.
-
-
@Grant Lamontagne said:
Yes, that would have been me.
As for photos...surprisingly enough, I never mixed archery with photography...probably because I din't want to haul around a camera while shooting.
I see a hundred places on those bows that one could easily mount a GoPro!
Def
Oh great. Is that what we're doing this weekend? It is too cold.
-
I've got a Martin Firecat and a set of XX75 1818 arrows kicking around somewhere.
Also a set of more appropriate carbon arrows for it.
Should dig them out for a laugh and some photos. -

:D
-
For the beginner...
https://www.youtube.com/watch?v=V4TVh1F46kYMistakes in archery and how to prevent them...
https://www.youtube.com/watch?v=7q2BVF-T8A0A slideshow that may require you to pause it..but not bad for historical content...
https://www.youtube.com/watch?v=13emtsUHdWw -
I enjoy the 3D Shoots the most.
I currently shoot just a Matthews compound bow. Debating on whether I am going hunt or not this year.I desperately need to pick up some more arrows.
-
I have a super cheap fiberglass recurve with a 30 lb (or so) draw. It's a toy, and I debated even posting it, but then I decided I really wanted to hang out with the cool kids.
I also need to get more arrows. Unless you manage a really good shot the neighbors' kids always manage to run away.
Def
-
If you're a good boy I will let you use the recurve I'm going to craft.
:P -
I am sporting a 1998 Jennings Black Lightning with the large wheels 55#, Martin Jaguar take down 45#, PSE Heritage Razorback 35#, and my a 2008 Horton Explorer150 that has seen very little use due to most ranges not being crossbow friendly.
I was shooting that Jennings as my hunting bow in early 2k but gave it up after an unrelated injury made wrist compression painful. I didn't really get back to shooting archery for about 6 years due to other distractions.Then My home state changed its hunting laws to allow crossbows for all seasons except archery.

I picked up the Horton as a replacement For a PSE Copper Head that tore itself apart...who would put standard string cleats on a crossbow. The potential for the string to roll on the flight groove and twist itself off the cable is quite disastrous. That's why I switched to a model that attached the string to the wheels directly.
The Jaguar and Razorback Are more recent.
I got back into archery after moving To a new state and closer to a big city and realizing the cost of shooting ranges tripled cutting my trigger time, but the archery ranges were both cheaper and more useful than they were living in the out sticks were you could shoot in your yard. -
Ok now I'm jealous.
I also have no idea what I want for a bow now.
I have been drooling over a Matthews solo cam but I'm totally unsure now after doing some thinking.
.I don't hunt anymore .
I'm thinking a target bow may be a better fit for me.
-
The first thing you need to know is what are you planning to use it for. You wouldn't go hunting with a target bow...simply because it would be all the wrong colour, and also because the poundage might not be enough to legally or consciously hunt in your area. Plenty of folks will use 35 to 45 pound bows for target practice. In my region, you shouldn't hunt with anything less than 60 pounds.
Second thing is to find a bow that fits you. More so than firearms, bows have to personally fit you for draw length, peep sight attachment, knock settings, shooting styles ect.
Which leads to the type of bow you are looking for. Bows that allow you to shoot shorter arrows, maybe by use of an overdraw, or a reflex riser design (bow goes towards archer) tend to be a little harder to shoot as any wrist movement will magnify itself at your arrow rest. On the up side, these type of bows tend to be faster overall. Deflex risers (the riser goes away from the archer) are great on target bows as they are the most forgiving, but at the cost of speed.
On top of that, you get different cams on compounds. Wheels are great for target shooters where smoothness of draw and little to no stacking is beneficial. On the other end of the spectrum, you have severe cams that stack plenty but also store more energy. They won't make your job of target bulls-eye shooting any easier, but that extra speed will help out on the 3D range. Mind you, not good trying to pull an extreme cam whilst cold up in a tree stand hunting. Like everything else, it can be done but will require more practice.
Which ultimately leads to the type of bow overall. So far, I am only talking about compounds. There are also recurves and long bows. Recurves are a nice compromise as the curved limbs give you that bit of stacking, but also that bit of zip off the arrow rest. They also tend to reduce hand shock unlike stick bows like long bows. It all depends on what you are looking for to do with it?
I know plenty of archers that have gotten tired of the technical compound and moved onto a much simpler Traditional style such as a recurve or longbow. Some will go all the way and not even use a sight...preferring to eschew all that can go wrong like broken cables, lost nuts and bolts, etc. I myself have a PSE Sequoia flatbow (type of longbow) and a Scythian horse bow for those times when I just want to have good fun shooting. With practice, you can get very very good with one of these...then you get the pleasure of showing off to those guys saddled with all that tech. >:D
Bows are like everything else, you will find it hard to have just the one. Most will have a compound and some sort of simpler wood bow. Nothing wrong with that Matthews solo cam. At least the single cam will eliminate timing issues (When you need two cams to roll together to maximize potential energy into kinetic energy). The downside to a single cam...they tend to be a little slower than double cam bows on average.
If you want to get into archery for the fun of it, I would suggest you get a nice recurve or longbow, a dozen arrows, maybe an arrow rest or off the shelf, and some sort of shooting glove or tab. That would be the cheapest way to get into it. If you are looking for a hunting compound, that single cam would do the trick. For first time buyers, I suggest buying an already made beginner kit as that would be the cheapest. Mind you the best advice would be to visit a few local archery clubs, archery shops, etc and get plenty of info. Just remember that the shops and clubs may be somewhat biased.
-
I got alot of looking and learning to do before I get another bow.
I think the last bow I bought I got about 1993.
Thanks for all the info Chako
-
Wanted to get back into archery for years now, just like to shoot targets.
Would love to get a simple compound bow.
Last bow I owned was a Fred Bear Whitetail 2 back in the 80's. Wish I still had it.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

















