Custom modified 84mm SAK
-
I believe that's true, though it is possible to put back-side tools on an Alox knife if you're prepared to cut the scale away:
@Glofindel said:
84 mm Alox with Wenger scissors and back tools hidden 4th pin.



Sent from my HTC One X using Tapatalk
-
@kosmo said:
??? Is it correct to assume that the 84mm SAK Cellidor knife parts (blades, tools, springs and etc) can be used in a custom 84mm with Alox scales, with the exception being tools like the corkscrew, which interfere with the alox scales cannot be used?
Yes. It's easy especially if you use brass pins rather torn screws.
@hiraethus said:
I believe that's true, though it is possible to put back-side tools on an Alox knife if you're prepared to cut the scale away:84 mm Alox with Wenger scissors and back tools hidden 4th pin.



Sent from my HTC One X using Tapatalk
-
If you want to use any backside tools in an Alox frame, you have to use a hidden 4th pin to keep the backtool springs in place.
-
@Glofindel said:
Yes. It's easy especially if you use brass pins rather torn screws.Are there torx screws that can be used if one reams/drills the holes on the 84mm or is it not recommended?
-
You can buy 1/8" diameter barrel pivots and torx screws to suit (from knifekits.com in the US) if you're prepared to drill all the tools springs and liners out. Otherwise you'll have to make your own pivots and source screws from somewhere local. I use M2 for pioneer mods but I've bought some M1.6 to try on thinner pins.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login