Hook without scissors?
-
Thanks all. :)
-
Ok, I have my Hiker, and I notice the saw layer has no backtool. (Waste of potential space. :))
Has anyone here ever reshaped the wood saw spring to accommodate a backtool? I think syph might have done it with a compact he added a saw layer to, but I might be wrong.
Is this even possible, or would it remove too much metal from the spring?A Hiker with Hook would be nice. :D
Thanks all.
-
Hi what you need is a saw layer from a swiss champ, those have the backtools. Those are 0.070" thick vs the hook at 0.100" so youd have to either grind the hook thinner, or make a pocket in one or both liners against that layer to give it some space.
The hook fits goofy compared to the other tools though, so even doing all that I'm not 100% sure it woudl close and sit low enough. It would be close though.

-
Thanks Syph, thats exactly what I was looking for. :)
About the weird fit of the hook, yes I noticed it in pictures. The pivot end is round while the other tools have a square pivot end, right?
Unfortunately, I dont see a way to get a square end on the hook, since that would envolve <u>adding</u> metal, not taking/grinding it away. :-
Anyone got an idea?Thanks.
-
Making a SAK without scissors but a hook? Be careful doing that, someone tried that already. This photo was taken right after his final peening hammer strike:

-
Yeouch.

Is my little project really going to bend spacetime and cause that?
-
@Pablo O'Brien said:
Thanks Syph, thats exactly what I was looking for. :)About the weird fit of the hook, yes I noticed it in pictures. The pivot end is round while the other tools have a square pivot end, right?
Unfortunately, I dont see a way to get a square end on the hook, since that would envolve <u>adding</u> metal, not taking/grinding it away. :-
Anyone got an idea?Thanks.
I think Syph is referring to the hook end sitting proud.
I could be barking up the wrong tree here but it might be easier getting the saw with a washer to fit a modified scissor spring.
-
Thanks for your input zoid, I'll have to consider that.
Your way, if it is easier, needs only parts found on a Compact.I'm looking for a comparison picture of the springs on the saw and scissor layer, ideally with the respective tools sitting nearby, anyone got one?
Edit: Found this. Is the saw spring on a champ the same as this? It seems that just getting this spring and a hook might be the easiest route?
https://www.flickr.com/photos/ufobike/8332380886 -
@Pablo O'Brien said:
Thanks for your input zoid, I'll have to consider that.
Your way, if it is easier, needs only parts found on a Compact.I'm looking for a comparison picture of the springs on the saw and scissor layer, ideally with the respective tools sitting nearby, anyone got one?
Edit: Found this. Is the saw spring on a champ the same as this? It seems that just getting this spring and a hook might be the easiest route?
https://www.flickr.com/photos/ufobike/8332380886Yes the saw spring is the same size. I'm sure you know this already but I'll mention it anyway, in that pic the scissor spring (Q) is upside down.
-
Oh thanks, I did not notice that about the scissor spring. Its obvious in hindsight though.

It seems like the path of least effort is to use that saw spring, but then I would have to grind down the entire hook to make it fit, and I dont have the tools for that.On top of that, the hook "fits goofy". I'm starting to wonder if this is futile.

-
@Pablo O'Brien said:
Oh thanks, I did not notice that about the scissor spring. Its obvious in hindsight though.
It seems like the path of least effort is to use that saw spring, but then I would have to grind down the entire hook to make it fit, and I dont have the tools for that.On top of that, the hook "fits goofy". I'm starting to wonder if this is futile.

That is why you go with the scissor spring. Only have to grind a little where the end of the saw sits and pack it out with a washer.
-
I could be wrong though, it happens. I would listen to Syph.
-
You may be wrong, but it makes sense, like syph. :)
I thought that extra effort would be needed with the scissor spring? Looks like I was confused.
How do you grind just right for good snap? Practice? -
@Pablo O'Brien said:
You may be wrong, but it makes sense, like syph. :)
I thought that extra effort would be needed with the scissor spring? Looks like I was confused.
How do you grind just right for good snap? Practice?You would be grinding where the end of the saw sits, not the pivot end, so the snap should already be okay.
-
Looking at the picture above, it seems that on the scissor spring on where the saw pivot end would go, it is a different shape than the saw spring in the same area. ???
-
@Pablo O'Brien said:
Looking at the picture above, it seems that on the scissor spring on where the saw pivot end would go, it is a different shape than the saw spring in the same area. ???The part of the spring that contacts the tool is the same. The scissors and saw share the same pivot shape. It will work. ;)
-
That upside down pic of the scissor spring is smurfing with my head.
;)
When I mentally imagine it the right way up, I begin to see what you mean.Thanks for answering my questions. :)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


