Kosmo's Projects
-
Just the position of the nail nicks really. If its an outer layer youd want both nicks facing out, but thats not possible. If its an inner layer, maybe it can fit in such a way both nicks are accessible?
-
@Syph007 said:
Just the position of the nail nicks really. If its an outer layer youd want both nicks facing out, but thats not possible. If its an inner layer, maybe it can fit in such a way both nicks are accessible?That should be OK because the Electrician's blade is wider and nail nick will be up higher. It would be toward the inside and above the can opener.
-
I'm roughing out an idea to create a peening fixture. Using a second rounded tip underneath to peen against. If it looks like it will work, I'll probably see if I can cut a channel in some HDPE to minimize movement of a the knife while peening to try to minimize hammering outside the effective diameter of the brass rod being peened. I should also be able to adjust the height of the lower rounded tip so it won't come into contact with the Alox scales.
I still need to pick up some metric parts (bolt, washers and nuts) that I assume I will need to attach to the rounded tip. These pictures give you a rough idea of what I'm trying to do.


-
Very cool and it looks like you have caught the modding bug!
-

I enjoy doing this kind of stuff, although I kind of limited not having access to a machine shop.The peening is kind of an art, although I thought maybe I can eliminate some problems, mostly to cosmetic mistakes that are easy to make.
-
Peening fixture with some controlled variability.
From my previous experience and that explained by Syph007 it would probably be better to work on the two outer rods first and tighten the knife blades and then finish the knife working on the inner pin, not making it too tight. With that in mind I made this fixture that uses the middle pin as a registration point to help minimize hitting the alox scales during peening.
I made this fixture using a liner as a gauge to drill the holes. The peening tip underneath can be raised and lowered using shims. It is also a little off center by ~1/16" or ~1.5mm so it will allow the peening tip to come in contact with different parts of the rod depending on how it is rotated. I use leather on top to help protect the upper surface (bottom photo).





-
I applaud your enthusiasm for experimenting with the riveting! Great to see what you come up with.

-
A
fish scalerpickle getter in an 84mm? It would probably work with an 84mm saw blade back spring, but the spring will need to be thinner or perhaps the use of a shim washer?
-
You can use the spring from the 91mm. Cut the end off and use it as a shim then shorten the spring. There was someone else on here a year or more ago that put a fishscaler on an 84mm that way.
-
I've got an urge to start another 84mm Alox mod. Perhaps a Micro-Farmer? Perhaps a serrated Micro-Farmer?
I've still got a mega blade knife on my mind.
Is there another 84mm large blade to fill out a four layer?Normal main blade
Serrated main blade
Youth main blade (butter blade)
?Small pen blade
Clip point small blade
Electrician's blade
Pruner blade -
♫ Should ♫ they ♫ stay ♫ or ♫ should ♫ I ♫ build ♫ now? ♫
- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)

-
Continuing on my bone scale project. I've got them prepared for forming. I was considering working with the bone scales and the brass liners with a sanding wheel. Do you think I should work with these two materials (bone and brass) separately?

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login