Mega MT Test - Saw Test - In progress
-
Hey, everyone.
Just in the middle of the saw test for pocket size MTs, and my arms/fingers are ready to fall off...just after 6 rounds of sawings.

Currently, just for these 6 pocket size tools, I have filmed around 36min+ of footage for just 6 rounds of sawing. By the end of the entire test, after 20 tools and 12 rounds each, it could be any where around 7-8 hours of solid sawing footage.

Now my questions before going into editing and presentation format is:
There are so much analysis to be done and so much ground to cover, should I present in groups (for example, pocket size vs mid-size vs large-size tools) VS individual tool(1 tool in 1 video) + a summary video(includes all data from all tools)?

And no worries, I won't just upload 8 hours of sawing to bore you, everything will be super speedup and finish in seconds.
-
That's a good question.
On one hand, it should be obvious that longer saws will be more effective, when all else is equal, thus favoring the longer MTs.
Also, I can't see the details of which MTs are in the box, but it seems like they're all SAKs. If it's all SAKs, I think the saw effectiveness is a foregone conclusion:
1 = Wenger 130mm
2 = Victorinox 111 mm
3 = Victorinox 91mm
4 = Wenger 85mmIf I were looking for a saw comparison video, I would look for 4 sizes of SAK, (85mm Wenger, 91mm Victorinox, 111mm Victorinox, and [whatever the full length Wenger lock-blade models are]) 2 sizes of Leatherman (standard + a big jigsaw blade in the Surge) , 1 size of SOG (PowerLock), and one size of Gerber.
But I think we in this forum know the winner will be the Surge with a big jigsaw blade (if that is allowed)
2nd = 130mm Wenger. It has the longest saw blade and the most material behind it for stiffness, as well as the excellent double-cut, neutral pitch teeth (cut on push and pull strokes)
3rd place = 111mm Victorinox
4th place = 91mm Victorinox
5th place = who cares? This is getting into "loser" or "better than nothing" category.
-
@Smaug said:
That's a good question.On one hand, it should be obvious that longer saws will be more effective, when all else is equal, thus favoring the longer MTs.
Also, I can't see the details of which MTs are in the box, but it seems like they're all SAKs. If it's all SAKs, I think the saw effectiveness is a foregone conclusion:
1 = Wenger 130mm
2 = Victorinox 111 mm
3 = Victorinox 91mm
4 = Wenger 85mmIf I were looking for a saw comparison video, I would look for 4 sizes of SAK, (85mm Wenger, 91mm Victorinox, 111mm Victorinox, and [whatever the full length Wenger lock-blade models are]) 2 sizes of Leatherman (standard + a big jigsaw blade in the Surge) , 1 size of SOG (PowerLock), and one size of Gerber.
But I think we in this forum know the winner will be the Surge with a big jigsaw blade (if that is allowed)
2nd = 130mm Wenger. It has the longest saw blade and the most material behind it for stiffness, as well as the excellent double-cut, neutral pitch teeth (cut on push and pull strokes)
3rd place = 111mm Victorinox
4th place = 91mm Victorinox
5th place = who cares? This is getting into "loser" or "better than nothing" category.
Thanks for chiming in!
For now, this 12 rounds are only for the 'pocket size' MTs only, which I define them as 3-4in in length and meant for pocket carry. So the contestants are little limited(only 6). But in total, there will be <u>20 tools</u> tested, and it will cover many popular tools that we will see/use often.
As for the result, I can't say just yet. A lot of factors will come into play, handle geometry, saw thickness, saw height and length, number of teeth, etc.
But rest assured, after 7-8 hours of sawing, we should have somewhat objective results on what tool works best. :)
For now, I still want to know few videos covering different sizes(pocket vs mid-size vs large) OR many short single tool video + a summary video? What do you all think?
-
Many short plus a summary.

-
This reminds me of a competition my father had back in the day, his huntsman vs his friend's original supertool, through a 2x4. Huntsman took it, but I'm inclined to believe any decent saw is comparable, it just comes down to the user. I'd race anyone through a 2x4 with any Vic, leatherman, or sog saw and regardless of what they were using I think it'd come down to man vs. man.
For me, I prefer Leatherman's saw on dry wood, and Vic's on green

Can't wait to see your tests!!
Edit: Short videos with a summary is preferable to me also
-
If I've understood the question correctly.....
I'd do in depth reviews of each tool showing the full range of features it has to offer, and then a "highlights" video which shows the big winners and big losers for a particular function in each of the main tool groups. This way, if a saw is a key item on their multitool, they can review the saw "highlights" video and see which tools work well on that function, then look at the tool specific video for more details on it.
This means you'll also have to do file reviews, screwdriver reviews for common tasks (electrical connections, door hinges, battery changes on small electronics, thumbscrew torture devices, MRI scanner calibration :P), scissor reviews, plus in depth compilation reviews of all the individual tools and the functions they offer ....
.... should keep you occupied for a while >:D
-
@Smaug said:
...
But I think we in this forum know the winner will be the Surge with a big jigsaw blade (if that is allowed)2nd = 130mm Wenger. It has the longest saw blade and the most material behind it for stiffness, as well as the excellent double-cut, neutral pitch teeth (cut on push and pull strokes)
3rd place = 111mm Victorinox
4th place = 91mm Victorinox
5th place = who cares? This is getting into "loser" or "better than nothing" category.
Wouldn't bet on that. Although the 130mm Wenger and the 111mm Vic saws are longer, they are also thicker than the 91mm and 85mm saws, almost twice as thick. That means you'll have to saw away twice as much material to cut the same branch thickness making you slower and using more energy.
Also the Surge blade exchanger saw is shorter to compensate for the space needed for the blade exchanger and also thicker than a standard saw. So I would rank it somewhere in the middle or lower part of the spectrum.
One of the better saws on multies is the one on the Juice models. About the same length as the Wave one and thin.

-
Is your favourite still the one on the 108mm Vics, Nikola?


-
@50ft-trad said:
Is your favourite still the one on the 108mm Vics, Nikola?


:ashley:
:P
Not really. >:D
I got two loose 108mm saws from lowtech some time ago to install them in some holder or into one of my GAKs to try the size/format again at some point and redo all the tests but never got around to do so yet.
-
...
But I think we in this forum know the winner will be the Surge with a big jigsaw blade (if that is allowed)2nd = 130mm Wenger. It has the longest saw blade and the most material behind it for stiffness, as well as the excellent double-cut, neutral pitch teeth (cut on push and pull strokes)
3rd place = 111mm Victorinox
4th place = 91mm Victorinox
5th place = who cares? This is getting into "loser" or "better than nothing" category.
Wouldn't bet on that. Although the 130mm Wenger and the 111mm Vic saws are longer, they are also thicker than the 91mm and 85mm saws, almost twice as thick. That means you'll have to saw away twice as much material to cut the same branch thickness making you slower and using more energy.
Also the Surge blade exchanger saw is shorter to compensate for the space needed for the blade exchanger and also thicker than a standard saw. So I would rank it somewhere in the middle or lower part of the spectrum.
One of the better saws on multies is the one on the Juice models. About the same length as the Wave one and thin.

The surge is capable of holding a far longer, thinner blade as well though. You just can't close it. As for the Vic saws, that's precisely why I don't prefer the spirit saw, and why I love sog's (albeit short) wide tooth narrow spine saw
-
Many short plus a summary.

Hey, Zoidberg.
Sorry for making it confusing, I re-write what I have, so do you still stick to 'many shorts + 1 summary"?
:DSay I was looking for the info:
I would like to see the summary first - what tools worked better.
Then I would look at the tests in order of the sizes that interested me - everything in that size.
Followed by a quick visual comparison of the sizes for reference - gives it some perspective.
Summary plus different sizes plus size comparison, now I'm the one making it confusing. :D
-
@SAKnight said:
This reminds me of a competition my father had back in the day, his huntsman vs his friend's original supertool, through a 2x4. Huntsman took it, but I'm inclined to believe any decent saw is comparable, it just comes down to the user. I'd race anyone through a 2x4 with any Vic, leatherman, or sog saw and regardless of what they were using I think it'd come down to man vs. man.For me, I prefer Leatherman's saw on dry wood, and Vic's on green

Can't wait to see your tests!!
Edit: Short videos with a summary is preferable to me also
After 48+ min of testing and learning, I tend to think there maybe some trick to use MT saw more efficiently. But it may not make much of a difference if you fingers/arms are fatigue. So there is some merits of being athletic and fit, and you may saw longer and faster.
Is there any reason for LM for dry vs Vic for green? Or it's just experience?
-
@50ft-trad said:
If I've understood the question correctly.....I'd do in depth reviews of each tool showing the full range of features it has to offer, and then a "highlights" video which shows the big winners and big losers for a particular function in each of the main tool groups. This way, if a saw is a key item on their multitool, they can review the saw "highlights" video and see which tools work well on that function, then look at the tool specific video for more details on it.
This means you'll also have to do file reviews, screwdriver reviews for common tasks (electrical connections, door hinges, battery changes on small electronics, thumbscrew torture devices, MRI scanner calibration :P), scissor reviews, plus in depth compilation reviews of all the individual tools and the functions they offer ....
.... should keep you occupied for a while >:D
:D >:D >:D >:D >:D >:D >:D >:D >:D >:D >:D >:D >:D >:D >:D >:D >:D >:D >:D >:D >:D >:D >:D >:D
:D >:D >:D >:D >:D >:D >:D >:D >:D >:D >:D >:D >:D >:D >:D >:D >:D >:D >:D >:D >:D >:D >:D >:D
I think you speak the truth, but I ain't sure I can handle it...
:D >:D >:D >:D >:D >:D >:D >:D >:D >:D >:D >:D >:D >:D >:D >:D >:D >:D >:D >:D >:D >:D >:D >:D
:D >:D >:D >:D >:D >:D >:D >:D >:D >:D >:D >:D >:D >:D >:D >:D >:D >:D >:D >:D >:D >:D >:D >:DSo as long there is a 'summary' video, people will be lazy and just watch that instead of all the individual videos. :ahhh
My original intention was to review and compare 16 popular tools in different sizes, but I figure if I want to go in-depth for each individual tool, that video will be waaaay too long and no one will ever finish it.
Right now, I am still not certain what's best for the video format. For future prosperity, I think do 1 multitool per video, semi in-depth, then do a bi-annual total summary may be a good idea. Decisions, decisions.....
-
@50ft-trad said:
Is your favourite still the one on the 108mm Vics, Nikola?



:ashley:
:P
Not really. >:D
I got two loose 108mm saws from lowtech some time ago to install them in some holder or into one of my GAKs to try the size/format again at some point and redo all the tests but never got around to do so yet.
I just rewatched your 108mm testing...man, I can only say I am so not looking forward to test my Mauser.

-
Many short plus a summary.

Hey, Zoidberg.
Sorry for making it confusing, I re-write what I have, so do you still stick to 'many shorts + 1 summary"?
:DSay I was looking for the info:
I would like to see the summary first - what tools worked better.
Then I would look at the tests in order of the sizes that interested me - everything in that size.
Followed by a quick visual comparison of the sizes for reference - gives it some perspective.
Summary plus different sizes plus size comparison, now I'm the one making it confusing. :D
Sounds like an i-bank investment memorandum format, and like most investors on prospectus, they always only read the first page. >:D
-
This reminds me of a competition my father had back in the day, his huntsman vs his friend's original supertool, through a 2x4. Huntsman took it, but I'm inclined to believe any decent saw is comparable, it just comes down to the user. I'd race anyone through a 2x4 with any Vic, leatherman, or sog saw and regardless of what they were using I think it'd come down to man vs. man.
For me, I prefer Leatherman's saw on dry wood, and Vic's on green

Can't wait to see your tests!!
Edit: Short videos with a summary is preferable to me also
After 48+ min of testing and learning, I tend to think there maybe some trick to use MT saw more efficiently. But it may not make much of a difference if you fingers/arms are fatigue. So there is some merits of being athletic and fit, and you may saw longer and faster.
Is there any reason for LM for dry vs Vic for green? Or it's just experience?
Again, just opinion based, but it's felt like the leatherman saw, it bites really hard on the pull stroke, which in green, fibrous wood, can be more difficult to manage than the Vic saw, which is neutral pushing/pulling. So in dry wood, the leatherman saw won't get bound up by strong wood fibers as bad, but can get a really aggressive bite into it.
Hope that makes sense, I've gotten into the russe a bit :D
-
This reminds me of a competition my father had back in the day, his huntsman vs his friend's original supertool, through a 2x4. Huntsman took it, but I'm inclined to believe any decent saw is comparable, it just comes down to the user. I'd race anyone through a 2x4 with any Vic, leatherman, or sog saw and regardless of what they were using I think it'd come down to man vs. man.
For me, I prefer Leatherman's saw on dry wood, and Vic's on green

Can't wait to see your tests!!
Edit: Short videos with a summary is preferable to me also
After 48+ min of testing and learning, I tend to think there maybe some trick to use MT saw more efficiently. But it may not make much of a difference if you fingers/arms are fatigue. So there is some merits of being athletic and fit, and you may saw longer and faster.
Is there any reason for LM for dry vs Vic for green? Or it's just experience?
Again, just opinion based, but it's felt like the leatherman saw, it bites really hard on the pull stroke, which in green, fibrous wood, can be more difficult to manage than the Vic saw, which is neutral pushing/pulling. So in dry wood, the leatherman saw won't get bound up by strong wood fibers as bad, but can get a really aggressive bite into it.
Hope that makes sense, I've gotten into the russe a bit :D
It's a little too early to disclose which saw is better
, but you are absolutely right in observing the LM Juice is sawing more on pull stroke.So far, my big away lesson from all these sawings is--if you know you may do a fair bit of sawing, and you could afford to lug a Silky Boy or Bahco Laplander with you, then by all means do it.
All the other functions on a multitool can be a decent alternative to the real tool, and user experience will not be that substantially different. But experience of using a real saw vs multitool saw is totally two different worlds apart. >:D
-
This reminds me of a competition my father had back in the day, his huntsman vs his friend's original supertool, through a 2x4. Huntsman took it, but I'm inclined to believe any decent saw is comparable, it just comes down to the user. I'd race anyone through a 2x4 with any Vic, leatherman, or sog saw and regardless of what they were using I think it'd come down to man vs. man.
For me, I prefer Leatherman's saw on dry wood, and Vic's on green

Can't wait to see your tests!!
Edit: Short videos with a summary is preferable to me also
After 48+ min of testing and learning, I tend to think there maybe some trick to use MT saw more efficiently. But it may not make much of a difference if you fingers/arms are fatigue. So there is some merits of being athletic and fit, and you may saw longer and faster.
Is there any reason for LM for dry vs Vic for green? Or it's just experience?
Again, just opinion based, but it's felt like the leatherman saw, it bites really hard on the pull stroke, which in green, fibrous wood, can be more difficult to manage than the Vic saw, which is neutral pushing/pulling. So in dry wood, the leatherman saw won't get bound up by strong wood fibers as bad, but can get a really aggressive bite into it.
Hope that makes sense, I've gotten into the russe a bit :D
It's a little too early to disclose which saw is better
, but you are absolutely right in observing the LM Juice is sawing more on pull stroke.So far, my big away lesson from all these sawings is--if you know you may do a fair bit of sawing, and you could afford to lug a Silky Boy or Bahco Laplander with you, then by all means do it.
All the other functions on a multitool can be a decent alternative to the real tool, and user experience will not be that substantially different. But experience of using a real saw vs multitool saw is totally two different worlds apart. >:D
No 12 opinel saw is one of my staples for the woods

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

