Maintenance Multi-tool
-
@50ft-trad said:
.... or the Victorinox Bit Wrench
(seriously, look into this)Is this the right one?
http://www.victorinox.com/us/product/Swiss-Army-Knives/Category/Accessories/Nylon-Pouch-with-Bits-Wrench/33340 -
@StephenAndMelissa Smith said:
@50ft-trad said:
.... or the Victorinox Bit Wrench
(seriously, look into this)Is this the right one?
http://www.victorinox.com/us/product/Swiss-Army-Knives/Category/Accessories/Nylon-Pouch-with-Bits-Wrench/33340That's the baby
Standard driver bits fit in both ends, and the case comes with a few standard bits and a few empty slots to add your own. Excellent little tool! -
@50ft-trad said:
If you expect to be cutting a lot of barbed wire or fencing wire, consider taking a separate pair of drop forged wire cutters, as these would be superior to the cast plier heads typically offered on multitools.+1 ^
MultiTool wire cutters may be damaged trying to cut wire that is too hard/thick
-
The ST300 and Surge were good suggestions, keep it simple with the ST300
Put a Spyderco Delica or Endura in your pocket and you are good to goI gather other dedicated tools will be available to you
-
Considering scissors are not on you list I think the Super Tool 300 would be a better fit. Nice long drivers. A real phillips. You can also get the bit driver to use normal 1/4" hex bits.
Bit Kit 3 | Leatherman
Leatherman Bit Kit 3 features Phillips #0 and #3, Torx T10–T15, and flatheads 0.2–0.075 in. Includes Hex 4–6mm for everyday repairs and adjustments.
Leatherman (www.leatherman.com)
The ST300 is a simple, effective, tradesman tool. You won't be disappointed with it. Hope this helps.
-
@Marcellus said:
I gather other dedicated tools will be available to youYes, I plan to have dedicated tools for major tasks. Looking for the multi-tool as a go to through out the day when I might not have my tool bag handy.
-
As an ex maintenance engineer I feel reasonably qualified to answer this. :D However I will say that this is still just a matter of opinion and there is always room for personal preferences. For me the Spirit X is the go-to choice. The comfy grip on the pliers and the long screwdrivers are what seals the deal IMO. Sorry to say that I'm not a huge fan of the flat LM bits, too fiddly and too short too often.
If you are going to be doing any serious amount of heavy steel wire cutting then I really think you'll want some dedicated cutters though. The replaceable ones on the ST300 and Rebar are definitely better than the ones on the Spirit, but they still pale in comparison to the real deal.
All the best with the project.

-
You think maybe a pair of 8" knipex bolt cutters? Or is that overkill?
-
@Demel said:
Considering scissors are not on you list I think the Super Tool 300 would be a better fit. Nice long drivers. A real phillips. You can also get the bit driver to use normal 1/4" hex bits.
Bit Kit 3 | Leatherman
Leatherman Bit Kit 3 features Phillips #0 and #3, Torx T10–T15, and flatheads 0.2–0.075 in. Includes Hex 4–6mm for everyday repairs and adjustments.
Leatherman (www.leatherman.com)
The ST300 is a simple, effective, tradesman tool. You won't be disappointed with it. Hope this helps.
Is the removable bit driver compatible with the ST300? How does it attach? on the flat head?
Good point on the scissors.
At this point I am leaning toward the ST300 or Surge.
ST300 Pros:
longer philips bit
has both saw and file at the same time (no scissors)Surge Pros:
has on hand open blades
interchangeable t saw blades
Interchangeable bits (Unsure, Seems to be mixed opinions on)How does the locking mechanism on the ST300 compare to the liner locks on the Surge?
Also note, probably correct on the wire cutters, will plan to used dedicated cutters most of the time and the MT cutters when in a pinch.
-
While i've never had a Surge, it's liner locks are similar/same as the Wave, and the locks on ALL of the leathermans you're looking at are all really solid.
Sometimes blades will have a very tiny amount of play when locked, but it doesn't affect their use, and more often, they're rock solid lockups.
-
Just go with BLAST-OFF


-
@StephenAndMelissa Smith said:
Considering scissors are not on you list I think the Super Tool 300 would be a better fit. Nice long drivers. A real phillips. You can also get the bit driver to use normal 1/4" hex bits.
Bit Kit 3 | Leatherman
Leatherman Bit Kit 3 features Phillips #0 and #3, Torx T10–T15, and flatheads 0.2–0.075 in. Includes Hex 4–6mm for everyday repairs and adjustments.
Leatherman (www.leatherman.com)
The ST300 is a simple, effective, tradesman tool. You won't be disappointed with it. Hope this helps.
Is the removable bit driver compatible with the ST300? How does it attach? on the flat head?
Yes it goes over the phillips driver. Its really helpful without having to replace leatherman bits and using normal bits instead.
-
@Aloha007 said:
The scissors are really nice on the Surge. You can mod the tool and remove them however I find when you need scissors, thats what works best.+1, I would not remove the scissors on a Surge, they are one of it's best features. You may find them more useful than you think.
The Surge is not only big, it is heavy as well - some don't like this so it would pay to handle one first.
One thing I have used the Surge for is shortening bolts using a metal jigsaw blade then using the file to clean up the edges. I find the OHO blades very handy as well. -
Don't know if you've seen the thread below yet :pok:. I know the rust "issue" comes up when talking LM but I have not yet had any issues. The other knock are the bits yet what's the difference then in using 1/4in bits besides shape? I love that I can change out blades/saws to suit whatever material I'm cutting. While not the best way or easiest longer Tshank blades can be used tho I wouldn't go to long.
/post/1154134
The tool tested is the older version without the replaceable 154cm wire cutters. This one also has the small bit driver.
I know it's a not in english but the video is worth a look IMO.- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
-
Get real tools! PH2/Flat screwdriver and a pair of pliers (one for gripping one for cutting)
Get a Farmer! excellent pocket knife, you will love it (better get 2 or 3 of these)
Get a fixed blade and an axe!
Get something to sharpen your knifes!
If you have money left! Get a MT that can work alone and does not need bits and blades and whatever. My recommendation would be a Vic Spirit (IMHO best tool selection) or a Rebar (much cheaper).About the Vic bit-kit:
The Vic bit-kit is excellent, but pricey. You probably can get a much cheaper bit kit at your local hardware store, although it might not be as compact.About the Surge:
Before you get a LM Surge, try one. I found it way to big and had tons of issues with it. For example I had trouble gripping stuff due to the large size combined with quite pointy pliers (needs large hands / strength)
**Blade Holder / Bit Holder: **Are interesting choices as they add versatility. However small parts easily get lost and might be hard to replace (especially LM bits).
Considering that you are not interested in File/Saw etc I think the Surge is a poor choice (I mean it will be good to have those but you probably won't need a blade exchanger). -
StephenandMelissaSmith,
If you have an REI store near you, you might be able to try out the various tools we've recommended before purchase. This would let you know if the tool is comfortable in-hand, and at least give you minimal idea if its functions suit you.
Just a thought.
-
@StephenAndMelissa Smith said:
I gather other dedicated tools will be available to you
Yes, I plan to have dedicated tools for major tasks. Looking for the multi-tool as a go to through out the day when I might not have my tool bag handy.
If he was marching on to a planned project, my brother would carry his tool bag with him.
But most the time he would inspect the issue first, if it is a quick fix, the ST300 in his pocket would just fix it on spot. -
Kam, this is exactly the beauty of the MT, any MT for that matter.
We all have proper tools at our disposal however what to bring on a call? How much to bring? It's normally an easy fix with a turn, tighten, or cut and off we go. If in fact the job requires the right tool or a specific tool then obviously we use that tool.MT for me is about taking care of business at that moment if I can.
-
I have attempted using my pliers-based tools with extremely hard 50 year old fence wire, (Leatherman Super Tool, the original) and they just can't cut that wire. They also have a little trouble with coat hangers. The main issue is ergonomics and leverage. A good pair of lineman's pliers do the job great. I have a pair that cut well that were used by my grandfather for close to 50 years, a good portion of that was used on fencing wire. Lineman's pliers for working with wire, and slip-joint for torquing bolts.
The aformentioned Trekker (or Trailmaster in non-American markets), which has at least half a dozen variants, considering different handle colors, plain vs. serrated blade edge, and the military issued variants which are quite a few, but the ones one can buy easily are the Swiss and German Army knives, which are part of the Victorinox catalog. I personally prefer the Swiss Army version of the Trekker, as it has the dual-density scales which are easy to grip.
As far as a screwdriver, I recommend a good dedicated screwdriver set with lots of bits. The Trekker may have two flat screwdrivers and a No. 2 Phillips driver, which may be the most common screw types, but I often come across some weird ones from time to time. A regular screwdriver with bits is less expensive than the cheapest Leatherman or Victorinox that accepts bits, and if you choose something like the aforementioned Klein, should last a lifetime. I also keep a precision screwdriver set around, for when I have to work with small electronics, or tighten my glasses.
-
@Lynn LeFey said:
StephenandMelissaSmith,If you have an REI store near you, you might be able to try out the various tools we've recommended before purchase. This would let you know if the tool is comfortable in-hand, and at least give you minimal idea if its functions suit you.
Just a thought.
Thanks. I think that will probably be my next step.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login