Maintenance Multi-tool
-
You may wish to call ahead to see if they allow you to try out the tools. Some REIs do, but I don't know if all of them do.
-
First off, sorry for the long post. Now, with that out of the way, I can't believe that no one has, in keeping with the MTO spirit, suggested carrying multiple MTs! It seems that two of the most recommend tools so far are the Surge and ST300, both of which I carry (although it's an old model Surge). In regards to cutting barbed wire, the Surge is definitely the better one simply because of the handles - because of the outside opening blades, the inside handle edges are wider and more rounded making them much more comfortable when exerting the necessary pressure to cut barbed wire (which is significant).
As for pliers, I cannot stress how handy a pair of ViseGrips are! I carry the 5" ones (model 5WR) and they are indispensable. I would definitely buy a set or two of ViseGrips (multiple sizes) and throw the larger ones in your tool bag and carry one of the small ones. If I were you, I'd go to eBay or something and get some American made ones, as the new ones are made in China and are a poorer quality IMHO.
I believe someone also suggested a fixed blade knife (if that's feasible); I would heartily agree and am somewhat partial to an Esee 4 (also been called a sharpened pry bar, he he :)).
So, to sum it up, I would recommend a Surge, ST300, and a pair of ViseGrips. If you don't want to carry that much, maybe a Surge modded to have a 3D Phillips instead of the bit driver, and the ViseGrips (I honestly do not consider the ViseGrips to be optional).
Ok, enough rambling, I'll shut up for now :)
-
I know it's not the MTO way, but my attitude to carrying more than one MT is that either or all of the MTs have failed. My ideal is one perfect MT that covers all forseeable situations (for me it's the Surge).
-
I want to again make you aware that central america is a mess between U.S and European standards for threads and screw heads. You´ll find both standards on hex screws and both NPT and G threads in plumbing for example.
I´m talking from experience after 3 years in central america.The Leatherman bit-kit holds both standards in a really flat package inside the standard Nylon sheath so that you always have most common of both standards in a 8 mm thickness package.
That holds a great value and will save you many trips to the tool box.
That is what a multi tol for maintenance work is about, in my opinion.
The leatherman tool and spares are possible to find also in central america.Is the Leatherman tool bit kit a stand alone tool box? No. For the tough jobs, rusted screws or big jobs, that will not work but you´ll be surprised what it can do in a pinch.
You are not looking for a substitution for a tool box but a light weight alternative for the small / medium jobs. Not even the most robust MTs will even be close to work with the kind of jobs you encounter in central americas humidity and lack of resources to make preventive maintenance. Things are kind of always stuck hard. -
I've got to jump in on this one. I am a big surge fan.
Hands down I recommend a leatherman surge.
I realise you said you were not interested in saw, file & scissors but I cannot suggest the surge more highly for a maintenance role. Yes you can interchange the saw & file and what comes to mind is if this is your only knife you could use the file to sharpen the blade in a pinch because you can remove it.
I also carry a surge that is used in a maintenance role and find having scissors to be a huge advantage. Don't write it off just yet.
The surge alone is extremely capable and will do all you ask.
-
I'd say Leatherman Surge. The steel isn't the greatest from their range but it's still pretty damn good. It's a bigger tool with a bigger knife and replaceable wire cutters.
Sent from my SM-N9005 using Tapatalk
-
I'm a bit late to the party but I'll answer anyway.
I'm currently working as a Maintenance Engineer, and I want to warn you against relying solely on a Multi, or even heavily relying on a multitool. While I do carry a Leatherman Rebar every day, it only sees use when I don't have my tool bag with me. That is often, but not for anything heavy. I beat the hell out of it when I use it, and it has come in handy a million times. That said, I do my best to always have my tool bag with me and I stock it with good, name brand(lifetime warranty), reliable dedicated tools.
This list is not too expensive, and will get you by for the majority of what you will need, if you can afford it and pack it all down there.
Klein 11-in-1 screwdriver(this one's absolutely necessary)
8 inch Channelocks/tongue and groove pliers
10 inch channelocks
8 inch crescent wrench
Small hacksaw
Nicholson mill bas-tard file with handle(believe me it's worth it to have a real one)
Cheap flat head screwdriver to use as a pry bar
insulated needlenose pliers
wire strippers/crimpers
Wire cutters
Klein Electrician scissors
Ratcheting screwdriver with bit set(less than $20 at home depot)
Folding razor knife(8 bucks at home depot)
Linesman pliers
some sort of Digital multimeter and a wiggy
Painters toolThis is a basic list, and it's less than half the tool bag I carry at work. Realistically, most of the time I get by just fine with only my Rebar, 11-in-1, 8 inch channelocks, and crescent wrench.
For a multi, I recommend the Rebar or Wave, as they are light enough to not be a bother when you are crawling around in some of the dank, cramped spaces you will inevitably find yourself in. The surge and ST300 are just too damn heavy for what they offer, if I want heavy duty I grab my dedicated tools.
If you go down there with nothing but a Leatherman Wave and a smile, you will end up miserable.
I feel I must throw this in: my department has about 18 Maintenance Engineers in it, and only three of us carry multitools. No one else bothers with them, they'd rather use dedicated tools.
-
That's a good list Sean, very similar to what I carried as a minimum. I preferred carrying a few separate screwdrivers and hex keys and not a 11-in-1, but that's a personal choice IMO.
I also agree that the idea of a 'heavy duty' MT being a must is a misnomer. A 4" MT like the Rebar, Wave, Flik or Spirit always performed well for the times I was caught without my tool bag and if they can't do the job then it's time to get the tool bag anyway.
-
@StephenAndMelissa Smith said:
[quote author=Lynn LeFey link=topic=62501.msg1165194#msg1165194 date=1444836236]
you might be able to try out the various tools we've recommended before purchase. This would let you know if the tool is comfortable in-hand, and at least give you minimal idea if its functions suit you.@Aloha007 said:
The Surge is not only big, it is heavy as well - some don't like this so it would pay to handle one first.@Gareth said:
I also agree that the idea of a 'heavy duty' MT being a must is a misnomer. A 4" MT like the Rebar, Wave, Flik or Spirit always performed well for the times I was caught without my tool bag and if they can't do the job then it's time to get the tool bag anyway.Thanks for the advice.
Today I was able to handle the Super Tool 300 and the Wave. While I really wanted to like the Super Tool/Surge size, it just didn't feel right in my hand as you warned. It probably would work, but it felt a bit clunky. It is pretty surprising that the Super Tool 300/Surge are 50% heavier for only an extra 1/2" (12.5%) of length, indicating the increased thickness as well.
-
@Mextreme said:
Leatherman Wave with a bit-kit without a doubt. central America is a mess with a mix of american and european standard for threads and screw heads. The bit kit contains both standards in a slim package.
The tool is globallly available , replacable and servicable and not inecessarily eye catching or expensive.
The serrated blade is practical to have as a back up if it wil be long between the possibilities to sharpen. The one hand opening blade can be practical as a last ditch defence option.Obi1shinobee & Metreme,
Thank you for your advice. It looks like you called it first. Tried the Wave today and really liked it.
The Wave handled nicely and fit naturally in my hand. I liked the rounded grips. I am a big fan of the OHO blades on the Wave as opposed to the ST300 or Rebar. It is noticeably lighter than the larger tools and has a slimmer profile which will make it better for EDC.
I haven't purchased yet, but plan to.
Metreme, What were you doing in central America?
-
@Mercury said:
I'm a bit late to the party but I'll answer anyway.I'm currently working as a Maintenance Engineer, and I want to warn you against relying solely on a Multi, or even heavily relying on a multitool. While I do carry a Leatherman Rebar every day, it only sees use when I don't have my tool bag with me. That is often, but not for anything heavy. I beat the hell out of it when I use it, and it has come in handy a million times. That said, I do my best to always have my tool bag with me and I stock it with good, name brand(lifetime warranty), reliable dedicated tools.
This list is not too expensive, and will get you by for the majority of what you will need, if you can afford it and pack it all down there.
Klein 11-in-1 screwdriver(this one's absolutely necessary)
8 inch Channelocks/tongue and groove pliers
10 inch channelocks
8 inch crescent wrench
Small hacksaw
Nicholson mill bas-tard file with handle(believe me it's worth it to have a real one)
Cheap flat head screwdriver to use as a pry bar
insulated needlenose pliers
wire strippers/crimpers
Wire cutters
Klein Electrician scissors
Ratcheting screwdriver with bit set(less than $20 at home depot)
Folding razor knife(8 bucks at home depot)
Linesman pliers
some sort of Digital multimeter and a wiggy
Painters toolThis is a basic list, and it's less than half the tool bag I carry at work. Realistically, most of the time I get by just fine with only my Rebar, 11-in-1, 8 inch channelocks, and crescent wrench.
For a multi, I recommend the Rebar or Wave, as they are light enough to not be a bother when you are crawling around in some of the dank, cramped spaces you will inevitably find yourself in. The surge and ST300 are just too damn heavy for what they offer, if I want heavy duty I grab my dedicated tools.
If you go down there with nothing but a Leatherman Wave and a smile, you will end up miserable.
I feel I must throw this in: my department has about 18 Maintenance Engineers in it, and only three of us carry multitools. No one else bothers with them, they'd rather use dedicated tools.
Mercury,
Thanks for the tool list. I will definitely be looking into these items.
-
@StephenAndMelissa Smith said:
I'm a bit late to the party but I'll answer anyway.
I'm currently working as a Maintenance Engineer, and I want to warn you against relying solely on a Multi, or even heavily relying on a multitool. While I do carry a Leatherman Rebar every day, it only sees use when I don't have my tool bag with me. That is often, but not for anything heavy. I beat the hell out of it when I use it, and it has come in handy a million times. That said, I do my best to always have my tool bag with me and I stock it with good, name brand(lifetime warranty), reliable dedicated tools.
This list is not too expensive, and will get you by for the majority of what you will need, if you can afford it and pack it all down there.
Klein 11-in-1 screwdriver(this one's absolutely necessary)
8 inch Channelocks/tongue and groove pliers
10 inch channelocks
8 inch crescent wrench
Small hacksaw
Nicholson mill bas-tard file with handle(believe me it's worth it to have a real one)
Cheap flat head screwdriver to use as a pry bar
insulated needlenose pliers
wire strippers/crimpers
Wire cutters
Klein Electrician scissors
Ratcheting screwdriver with bit set(less than $20 at home depot)
Folding razor knife(8 bucks at home depot)
Linesman pliers
some sort of Digital multimeter and a wiggy
Painters toolThis is a basic list, and it's less than half the tool bag I carry at work. Realistically, most of the time I get by just fine with only my Rebar, 11-in-1, 8 inch channelocks, and crescent wrench.
For a multi, I recommend the Rebar or Wave, as they are light enough to not be a bother when you are crawling around in some of the dank, cramped spaces you will inevitably find yourself in. The surge and ST300 are just too damn heavy for what they offer, if I want heavy duty I grab my dedicated tools.
If you go down there with nothing but a Leatherman Wave and a smile, you will end up miserable.
I feel I must throw this in: my department has about 18 Maintenance Engineers in it, and only three of us carry multitools. No one else bothers with them, they'd rather use dedicated tools.
Mercury,
Thanks for the tool list. I will definitely be looking into these items.
No worries.
I hope you like the Wave, it is a fantastic tool. If I wasn't so happy with my Rebar I'd EDC a Wave.
-
@StephenAndMelissa Smith said:
Leatherman Wave with a bit-kit without a doubt. central America is a mess with a mix of american and european standard for threads and screw heads. The bit kit contains both standards in a slim package.
The tool is globallly available , replacable and servicable and not inecessarily eye catching or expensive.
The serrated blade is practical to have as a back up if it wil be long between the possibilities to sharpen. The one hand opening blade can be practical as a last ditch defence option.Obi1shinobee & Metreme,
Thank you for your advice. It looks like you called it first. Tried the Wave today and really liked it.
The Wave handled nicely and fit naturally in my hand. I liked the rounded grips. I am a big fan of the OHO blades on the Wave as opposed to the ST300 or Rebar. It is noticeably lighter than the larger tools and has a slimmer profile which will make it better for EDC.
I haven't purchased yet, but plan to.
Metreme, What were you doing in central America?
Congrats on the Wave. I know you will be happy with it.
We set up a branch office working with industrial automation for central america (mainly Mexico). Not exactly maintenance but our customers were many time maintenance engineers and I experienced the mess between U.S. Imperial and European metric standards common in the area.
The Wave will be practical not only in your work but all the time. In Central America everything is not so well functioning or prepared, there are no easy opening products for example, and you will eat a lot of fresh fruit, bread and vegetables. it´s old style so the one hand opening of the main tools will be valuable.
Good Luck to you. You are in for a real adventure. -
While I suggested the Surge there's no denying the Wave is very capable. I got my Wave first then Surge and both are tremendous tools. The bit extender works on the Wave as well which will allow you to use 1/4in bits and the LM flat ones. This LM favorite should be a nice companion when your dedicated tool bag is far from you or you're trouble shooting.
All the best to you on your adventure.
-
Your love the wave

-
Another vote for the Wave. The bit hit and extension are extremely valuable and come in handy often.
Don't think I would try cutting fence wire with a wave though, or any multitool for that matter. I have horses so I am aware that fence wire needs a dedicated cutter.
Sent from my iPhone using Tapatalk
-
@StephenAndMelissa Smith said:
Leatherman Wave with a bit-kit without a doubt. central America is a mess with a mix of american and european standard for threads and screw heads. The bit kit contains both standards in a slim package.
The tool is globallly available , replacable and servicable and not inecessarily eye catching or expensive.
The serrated blade is practical to have as a back up if it wil be long between the possibilities to sharpen. The one hand opening blade can be practical as a last ditch defence option.Obi1shinobee & Metreme,
Thank you for your advice. It looks like you called it first. Tried the Wave today and really liked it.
The Wave handled nicely and fit naturally in my hand. I liked the rounded grips. I am a big fan of the OHO blades on the Wave as opposed to the ST300 or Rebar. It is noticeably lighter than the larger tools and has a slimmer profile which will make it better for EDC.
I haven't purchased yet, but plan to.
Metreme, What were you doing in central America?
I'm late to this thread and I'm sure others have given great advice but I'll throw in my opinion anyway.
If you get the Wave then be sure to also get the ST300 and the removable bit driver for it, you can thank me later.
Consider getting the Rebar and swapping plier heads with the Wave, gift the Rebar to another volunteer when you get over there.
-
The wave is great for EDC, but I would probably go with the Rebar over the wave as a maintenance tool, and carry another knife and probably electrician's scissors for when you need to cut things or do knife stuff. I suggest that whatever you get you should use it, a lot, before your trip so you get used to it and understand its limitations
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login