How sharp is sharp for your multitool?
-
Jewlers rouge is a bit too fine usually. There are many good polishing compounds out there. I prefer something called Yellowstone which is actually pink. They are usually made of various oxides. It seems there are state secrets about what some of these have in them. Some use waxy compounds to mix with the abrasive. They are excellent for putting that sharp polished razor edge on. They can be rubbed into a flat piece of leather or some material like denim. This is the way to go for a polished edge as opposed to a saw edge. A saw edge is better for cutting things like cord and rope. After many strops with polishing compound a bevel will begin to round and has to be reshaped some. The finest grit sharpening stone I have is a 2200 grit ceramic. You can get stones up to 8000 grit but they are expensive and stropping with a polishing compound is more economical and does the trick.
-
All mine will shave hair. An I carry touch up gear in my briefcase.
Chris
-
A little off topic, as everyone knows if you use your knife very often and on many unrecommended ways you will see scratches on the surface of the knife. I use a metal polish to remove them and bring back that shinney surface, are there a better way to do it?
-
Instead of thinking how sharp an edge is better to think in terms of the proper edge for the range of tasks the edge will be used for and the proper edge for those ranges of tasks. It's an engineering tradeoff thing.
-
All mine will shave hair. An I carry touch up gear in my briefcase.
Chris
A knife can shave hair and still not be properly sharp.
As long as you can shave hair along the complete length of the blade I would say that is sharp enough.
Not so Benner. A razor sharp mirror polished edge that is great for carving can be useless for cutting rope. You may actually prefer a coarse saw edge for that. The angle of the bevel and if it has a micro bevel etc are all important. Different types of edges serve different purposes. A straight razor has a very unique bevel.
-
All mine will shave hair. An I carry touch up gear in my briefcase.
Chris
A knife can shave hair and still not be properly sharp.
As long as you can shave hair along the complete length of the blade I would say that is sharp enough.
Not so Benner. A razor sharp mirror polished edge that is great for carving can be useless for cutting rope. You may actually prefer a coarse saw edge for that. The angle of the bevel and if it has a micro bevel etc are all important. Different types of edges serve different purposes. A straight razor has a very unique bevel.
I was only saying that was sharp enough for me and my needs.
-
Under a 20x stereo microscope you can see many different levels of shaving sharp but I swear I am not obsessed with sharpening. It's just not perfect till you reach the limits of the molecular micro structure of the steel you are sharpening and the limits to hold the edge based on the hardness/softness of the steel. I DO NOT have SOCD(sharpening obsessive-compulive disorder).
-
Since I got this thing:
http://scientificsonline.com/product.asp_Q_pn_E_3084061
I !!KNOW!! when an edge is right or not. People's hair and paper are different. The 3D image of an edge under an illuminated stereo microscope shows you what is going on with an edge. You KNOW when stropping has rounded the bevel and it needs to be dressed on a stone. It will show micro-serrations and curled feather edges. You will see nicks that need dressing. If you put a micro-bevel on the main bevel it will show it. I repeat I do NOT have a sharpening problem.
Now I will try to relax and stop hyperventilating. I'm fine. -
eeeeaaaaaasssssyyyy Trigger... :D
-
@FredKJ said:
Under a 20x stereo microscope you can see many different levels of shaving sharp but I swear I am not obsessed with sharpening. It's just not perfect till you reach the limits of the molecular micro structure of the steel you are sharpening and the limits to hold the edge based on the hardness/softness of the steel. I DO NOT have SOCD(sharpening obsessive-compulive disorder).After learning to sharpen with the sharpmaker I think I have SOCD, I want my knife sharp enought to be able to fillet a paper always. I terms of rope cutting, I could always use the serrated edge.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login