Going Buck Wild.
-
Indeed.......
Toolguy - I'll stop asking for collection photos, I'm guess you'll need to hire people to get that done!


Do you display your knives at all?
I have to hide my small collection as best I can in fear of theft, while what I actually want to do is lay everything out on the floor and sit in the middle of the lot each day :D
I can just image being a knife-nut you must feel the same or something similar, and you've got sets that should look better together than.......just about anything I can think of! :D -
Intermission?
-
@Gerhard Gerber said:
@SteveC said:
Indeed.......
Toolguy - I'll stop asking for collection photos, I'm guess you'll need to hire people to get that done!
Do you display your knives at all?
I have to hide my small collection as best I can in fear of theft, while what I actually want to do is lay everything out on the floor and sit in the middle of the lot each day :D
I can just image being a knife-nut you must feel the same or something similar, and you've got sets that should look better together than.......just about anything I can think of! :DI keep this current collection of Bucks in a craftsman tool chest.I have the two DU models displayed in my sports room with some Ducks Unlimited memorabilia.
-
This is one of the Buck 112's I mentioned in a previous post.This particular Buck was made during the first year of 112 production,1972.During that year Buck experimented with blade orientation to the handle,handle material,number of handle rivets and spring retainer metal.
This 112 I have pictured below is a <u>Category II version 2</u>.That is it has the Segua wood handle with two small brass rivets.
This legend explains some of these transitions:
Buck Ranger Model 112 Timeline 1972.
Category I:Inverted stamp: BUCK, U.S.A.
Version 1. Left hand stamp, brass spring holder, black micarta inlays, two small, less than 1/16” brass inlay rivets and stainless rocker rivet.
Version 2. Same as above except now a stainless spring holder.
**Category II:**Stamped BUCK, 112, U.S.A.
Version 1. Left hand stamp, stainless spring holder, black micarta inlays, two brass inlay rivets and stainless rocker rivet.
Version 2. <u>Same as above except inlays are Segua wood. </u>
Version 3. Same as above except inlays are Macasar Ebony wood.
-
This is the Buck 112 mentioned in reply #378.It's a 112 finger groove that was first produced eight years after the original 112 was introduced in 1972.I bid on one of these several weeks ago and was startled that the bidding went over $140.00.I learned more about the true value of this particular model.
I was perusing ebay for more unique model 112's when this very model came up for sale.The owner placed a BIN price of $95.00 NIB,so I bought it.
Collectors are able to distinguish this first year of production because Buck initiated a date stamp system several years prior to the introduction of this model.This is a Category IV Version 3 model and you can see it is the first time the 112 finger groove model appears.
This legend will help to explain.
Category IV Stamped BUCK 112 U.S.A. 1980 to 1981.*
Version 1. Left hand stamp, stainless spring holder, Macasar Ebony inlays, three 1/8” brass inlay rivets and stainless rocker rivet.
Version 2. Same as above except nail notch added.
Version 3. Same as above except radius handle edges. No radius in thumb depression area. <u>Finger grooved model introduced.</u>
-
Very cool 112's

-
@Gerhard Gerber said:
Indeed.......
Toolguy - I'll stop asking for collection photos, I'm guess you'll need to hire people to get that done!
Do you display your knives at all?
I have to hide my small collection as best I can in fear of theft, while what I actually want to do is lay everything out on the floor and sit in the middle of the lot each day :D
I can just image being a knife-nut you must feel the same or something similar, and you've got sets that should look better together than.......just about anything I can think of! :DI keep this current collection of Bucks in a craftsman tool chest.I have the two DU models displayed in my sports room with some Ducks Unlimited memorabilia.

Occurred to me the other day while watching the Forgotten Weapons channel - a lot would be lost were it not for collectors.
-
@Gerhard Gerber said:
Occurred to me the other day while watching the Forgotten Weapons channel - a lot would be lost were it not for collectors.Gerhard your observation has merit and there are many collectors who see themselves as such preservationists.
Here are two that I rescued from from one owner who didn't understand it's history and another owner who was clueless about how to care for a good knife.
The first knife is Buck 102 Woodsman.I found it on ebay and it was advertised as a 105 Pathfinder.The most important feature of this knife is its inverted two line stamp.This places its birth date between 1968 and 1972.
It came to me in average condition for its age but the sheath was darn near perfect.After a few hours in the shop reconditioning the blade,hilt,handle and butt cap it looks near new.
The second Buck was advertised as very good condition but the low quality photos couldn't bear this claim to be true.I took a chance since it was a dedicated knife site.Unfortunately the seller didn't reveal the fact that someone had taken sand paper and sanded the blade from the hilt to the tip of the blade.The factory sands the blades from the spine to the edge.This non factory sanding left ugly marks that ran perpendicular to the factory finish.
It took a few hours of a combination of hand work and machine buffing, with the appropriate compounds and in the correct direction,to restore this blade to factory new condition.
-
Oh great, the intermission is over
Really like those 112 Rangers , TG -
@Marcellus said:
Oh great, the intermission is over
Really like those 112 Rangers , TGThanks Marcellus.
I have another 112 that I discovered on ebay two weeks ago.The blade was etched with "Buck Knives Since 1902".The date code indicates this was built in 1995 but the most important option this knife possesses is the nickel silver frame.During the past seven months of collecting Bucks,I've only seen about six 112's with N/S frames among the thousands of Bucks that I've viewed.I bought three of those.


-
This is a limited edition of 1,000 knives produced in 1990.It depicts a Whitetail deer in their natural environment and was etched by Buck Knives.In the fifteen years prior to this Aurum Etchings performed this work.
Buck Knife purchased Aurum Etchings and their revolutionary etching technology in 1988-1989.Aurum Etching's equipment was then installed at the Buck factory located in El Cajon,California which then allowed Buck to perform this work in-house.
-
I'm so swamped with work around our house and cabin that I haven't had enough time to take care of more important business,such as buying more Bucks.LOL
I had some time after cutting a tree and mowing the grass,so I put it to good use and snapped some pics.
The first one up is another Buck commemorative knife which celebrates Bucks 10TH anniversary at its new Idaho manufacturing facility.They used stabilized pine for the handles with star shaped imitation garnet inserts and garnet spacers.It also incorporates a nickel silver frame.
The second knife is edition number VII in the 10 knife Harley Davidson series which commemorates milestones in their history.This is only one of four that uses a nickel silver frame as apposed to a brass frame used in the other six editions.
The blade depicts Harley riders,who have formed a club and ride as a group.
-
More great additions to your collection TG. Really like that 10th Anniversary!
-
Thanks David.I waited several months to find a good deal on that model.
Here is a recent introduction by a dealer named Copper and Clad,which carries on with their series of Bucks produced using 5160 steel.
As can be seen this is a 112 Ranger with the mentioned 5160 steel and charcoal scales.
-
My older brother,who has always looked out for me,came by yesterday and brought one of his knife bags full of goodies.
He pulled out several Buck knives and asked if I wanted to buy them.My first question,of course was, how much? He then pulled out several pieces of paper which were paypal receipts and asked if I would pay what was printed on the receipts.I knew the price of the "Build Out" 110,the Custom Shop 112 and the two dot 112 but I was unsure of the other two.When I offered to buy just two since I had the other three he exclaimed this is an "all or nothing deal".
So now I'm now the proud owner of five more Buck knives,OMG.
Here is one of them before I take it into the shop and polish out the scratches and buff it to new condition.It's a Custom Shop 112 with a brass finger groove frame,redwood handles with brass pins and an S30V blade.
-
Some more nice ones tg

-
Here is the aforementioned Custom Shop Buck 112 after a spa treatment in the shop.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
