Your favorite small sized multitool
-
To answer your question, yes, Micra scissors have no rival

I wholeheartedly recommend trying one as an EDC tool!

-
My vote goes to the Leatherman PS4. I was able to find one with the torx screws and carry it on a daily basis. I've got a Victorinox Pioneer X that will probably join it and my Spyderco Ambitious in my EDC kit.
-
Style CS
-
Easy this one - my Raker Ring Tool.
I only use it for prying, tightening camera quick-release plates and opening packets, but its probably my most used tool.
<a href="http://s36.photobucket.com/user/DaveK-ToolPics/media/IMG_0722_zpskjyv5fx4.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i36.photobucket.com/albums/e10/DaveK-ToolPics/IMG_0722_zpskjyv5fx4.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
-
Victorinox Rambler > Any other 58mm Victorinox > Leatherman Micra > Leatherman Squirt PS4 > Leatherman Style PS > Any other small Leatherman >>>>> Gerber Dime
-
@mrog said:
Victorinox Rambler > Any other 58mm Victorinox > Leatherman Micra > Leatherman Squirt PS4 > Leatherman Style PS > Any other small Leatherman >>>>> Gerber DimeI don't agree with all those, in that particular order, but yeah

the Rambler's awesome

A neat tool for its size, maybe the champion of the 58mm line!

-
A custom SAK:
Sent from my SM-G955U using Tapatalk
-
LM Squirt PS4. I modded it to remove the file and replaced it with the awl and small eye-glass driver from the older PS range. If I want to go bladeless (or end up carrying a dedicated blade...
) I can swap the blade for the file (not done it yet, so need to check nail nicks). Added into my pocket sheath is a Thrunite Ti3, a pen, and a generic small pry bar tool, and I'm ready to go! :)I also have a black Vic Classic on my keychain, which I've had over 20 years --- but only recently is it a regular on the keychain. At office keys stay in my bag, as we have electronic swipe cards for doors, but the Squirt kit stays in my pocket.
-
My favorite keychain..
That everyday iam bring to my workplace...
On power station
-
@Ayik goyep said:
My favorite keychain..
That everyday iam bring to my workplace...
On power stationThat is my revision for my keychain, all stuf are handmade or DIY, except my SAK, USB and a cigarete, consists of :
- Keychain duct tape (DIY)
- USB 8 gb
- SAK
- Utility cutter razor (DIY)
- Cigarrete
- lighter (DIY)
- key chain suspension clip (DIY)
Best regrads

-
@Huntsman said:
Talking of larger SAKs - The question to which I responded was: 'What is your favourite key chain multitool?' ???- So to answer the actual question I think I will respond:
Wenger Evo 13: Blade, Scissors, openers, tp, tw, nail file - all in a very nice package - Brilliant
Wenger Evo 13 is 85 mm full sak. It is not a keychain tool.
- So to answer the actual question I think I will respond:
-
My vote goes to the Leatherman Micra. I've lost more of those than I like to think about. Oh no, now I'm thinking about it :ahhh
-
in the months (years?) since I first responded to this thread,
I've grown very fond of the Squirt S4 over the Micra

-
These days a LM Squirt P4 is my only EDC tool. It is small enough that I don't notice it in my pocket, but when I need it it's ready & waiting for whatever light duty tasks I want to do..
-
@gregozedobe said:
These days a LM Squirt P4 is my only EDC tool. It is small enough that I don't notice it in my pocket, but when I need it it's ready & waiting for whatever light duty tasks I want to do..I'm with you gregozedobe but I have to also carry my Manager. The scissors and pen are so handy.
-
I love my minichamp. It's on the keyring to my jeep, so it's usually with me. However, I think the scissors on the Schrade DL-2 are better. They're springless, they have a slimmer profile, and they're sharp as blazes. They're much better at trimming fingernails, at least. The Minichamp is no slouch, but the DL-2 scissors are just better. I do also really like the scales on the DL-2, they're really deep and glossy. With a blade, a nail file, and scissors it's like a Victorinox SD... but even smaller!
I don't really EDC my DL-2s, as I'm collecting tool and auto/moto related advertising on SD-sized knives. But if I had call to use a Victorinox SD.... I'd get a Schrade DL-2 instead.
The Texaco and Snap-On are Schrade DL-2's. The Michelin is a Victorinox SD, for size comparison
Charles.

-
Victorinox Rambler/Manager
Second place goes to the Wenger Pocket Tool Chest/Evo 88, and it would win outright if it had the Phillips combo tool and the SD file from the Rambler
-
Just curious, what do you like so much about the SD file on the Rambler?
You could probably mod the one on a PTC to be similar in shape
I'm also a big fan of the combo phillips

-
@theonew said:
Just curious, what do you like so much about the SD file on the Rambler?
You could probably mod the one on a PTC to be similar in shape
I'm also a big fan of the combo phillips

The combo tool on the PTC does the job of the SD file tip, but if you swapped the combo tool to the Phillips type, you'd need a SD tip on the file to replace that function.
-
Check this little thing out. I got two of these little guys in a big lot of multi tools. It’s branded PokeTech, is made in Taiwan, and is labeled US PAT No. Des 414092. Interesting enough, the pliers are the part that is patented. The tool load is not included in the patent.
The pliers themselves are VERY similar to victorinox 91mm pliers. Just a hair larger and a hair thinner. The tool load reminds me of Vintage Coast multi tools. The opener in particular is a Coast design. The file is heat treated and quite nice, it’s a dull finish not stainless like the rest. The main blade is sharp enough to cut paper, and the serrated blade goes through paracord quite nicely. All the drivers are decent, slightly rounded corners on some but not bad at all. Some are machined after polishing and have sharp corners. The lanyard loop is redundant but everything else is useful and works well - even the 2D Phillips driver.
The pliers take a lot more force than victorinox pliers, due to the form factor obviously. They do deflect at the tips a little easier though. The teeth are well formed and grippy enough for the size. This is a super small, and yet super useful little tool. I like it!
Charles.




Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
