My Juice
-
Juice modding
So you want to mod a Juice, or more likely you just want to see what I did, so let's get started.
Juices are not commonly modded, if the numbers of threads on here are any indication, and for good reason they are not easy to mod (also I would guess that it is also due to be fairly expensive). The construction of juices like a SAK is pin based, but unlike a SAK the liners are a major structural feature that not only separate tools but also hold the backsprings in place.
Here are the past threads on juice modding (it got a little long):
Spoiler:
Metro's smoothie
</topic/42673Metro's slim S2
</topic/43934Metro's slingshot Juice
</topic/47477
</post/831926>Metro's BO juice
</topic/44650Metro's slim blunt nose
</topic/43964Metro's tools
</post/710959>TattooSteve's slim Juices
</topic/63020
</post/1209789>J-screw's unfinished super juice
</topic/19553Syph's SAK blade mod
</topic/37942Baja's Pro referb
</post/701411>Cutting hooks
</post/779587>OHO Juice
</topic/3461Evil's OHO liner locking Juice
</topic/31417Powernoodle's "naked" juice
</post/470322>Broken
</post/64124>
</post/539319>
</topic/35532At any rate this project started with the simple mandate of fix what ails this S2 mainly a missing spring and the liner pressing into the scissors (looking at pictures this seems to be a common fault and I fixed it by ditching the opener the wider liner seems to be unable to handle the three springs).

So I wound up buying this used XE6. Which was missing a spring despite not being described as such


-
Wow, nice job putting those together! Im going to spend a little time delving into those, as some of them I hadn't seen before!
-
Disassembly
One more link (the juice patent it might be useful)
http://www.google.com/patents/US6622327?dq=6622327The first thing to do is file down the heads of the pins. If you care about saving the scales I recommend the SAK file, it really tore right through those heads, if you don't care about the scales then go whole hog. A grinder or dermal tool would probably work but filing by hand was no problem.


I would also suggest scoring an "x" into the pin I had problems with the drill wondering around. In general I filed, drilled, then picked at the head with my powerlock trying to remove material then repeated the process.


Then comes the pin punch, you might want to drill a smaller hole into the pin so you have some traction. A few whacks with a hammer and the pin with start to move then a few more and you'll be left with a bunch of parts trying to explode under the springs. Have a few ziplock bags around to catch the parts. Having done it both ways attack the pin farthest away from the pliers first then the other one.
I should note this was the hardest step the pins are made of pretty stern stuff, I broke a pin punch and nail set on these pins (I am sure there was operator error in there abut still two dead tools and 4 pins removed). The other important thing to pass along is that you have to remove the pins not the tools from the pins. The liner that the pliers attach to are u shaped, if you did as I did try to bend the liner to slip the tools off you will bend the liner out of shape, although it may still be useable.

-
@sLaughterMed said:
Wow, nice job putting those together! Im going to spend a little time delving into those, as some of them I hadn't seen before!Some really good ideas in there. Some that I really wish still had the pictures. Like Syph's supposed Alox juice.
-
@sLaughterMed said:
Im just as frustrated as you are that he hasnt finished his mod yet yud, but this is a little passive agressive....J-screw's unfinished super juice
</topic/19553
that was not my intention, I was merely noting that the status of the thread was unfinished (the mod was finished apparently). Although I should of noted that Baja's refurb was or at least feels unfinished. Many of these are more thoughts then full on mods. -
Oh yeah one more thing about driving pins, the edge of the vice I used left deep marks in the scales, this might be fixed by putting down some leather or wood.
Now on to assembly. The pins are 1/8." As Syph mention in another thread knife kits' pivots have been slightly big, so he recommends Alpha knife supply. At any rate if your pivots are too big I chucked the pivot in the drill press and used a file and sandpaper to bring them down to size.
Assembly is pretty self explanatory, just one note make sure that the lanyard ring is placed so the notch is up when closed I made that mistake
.
So finally to my Juice. Originally the plan was add a file to the S2. But then I realized that I don't use the openers and the added spring seems to make the liner sit as to rub up against the scissors. So the can opener got dropped and the extra space was filled with the serrated blade. At some point I might try to add in a awl.


Now the much ballyhooed springs, first off you might want to hold off on the springs until the scales are on. The side springs don't want to be there and the will leave if given the chance. I fully expect to redo all four side tools before I am done.
Personally I did not find the springs that hard to do, granted that is do to Metro's pioneering work, discovered with the historiography.
I used a nail set and pushed the springs in by hand (although I did give one a tap with a hammer). Also I used a bottle opener on a SAK and a SOG can opener to move the springs from side to side. The three screwdrivers springs seem to be the easiest to place, followed by the scissors, the the blades, and the hardest seem t the Philips springs.

Well that is where the Juice DL4 stands till the post delivers my scale material.


-
Nice job Yud! did you do all that with a hand held drill?
Also, how thick is it?
-
Thanks it is a little over a half inch thick.
I used a drill press instead of handheld drill. But I think you could probably skip the drill and just use files.
The tool list:
Drill press and bits
Files
Powerlock
Sandpaper
pin punch and nail set
hammer
screw drivers -

Done, I just need some decent pictures.

-
That looks really nice.
Well done, and thank you for the detailed pics.
Cheers,
Pete
-
Nice job!
That's us mobile
-
Great job!
Whats the plan with your leftovers? Another juice mod?
-
Great job! I don't understand why LM doesn't produce more variations on the Juice line.
-
I suspect it is because the Juice line is leathermans least popular line if tools, because they are trying to compete with the same niche that SAKs already dominate. Plus, I know of only one store in the area (5th largest metropolitan area in the USA) that has any Juices (and they only have two in stock), so availability is probably an issue as well.
-
@ducttapetech said:
Nice job!That's us mobile
@sLaughterMed said:
Great job!Whats the plan with your leftovers? Another juice mod?
@rdub934 said:
Great job! I don't understand why LM doesn't produce more variations on the Juice line.@pietervn said:
That looks really nice.Well done, and thank you for the detailed pics.
Cheers,
Pete
Thank you all but I probably should of mentioned that that is an old photo. Here it is with the custom scales.


Asian water buffalo scales.
-
@sLaughterMed said:
I suspect it is because the Juice line is leathermans least popular line if tools, because they are trying to compete with the same niche that SAKs already dominate. Plus, I know of only one store in the area (5th largest metropolitan area in the USA) that has any Juices (and they only have two in stock), so availability is probably an issue as well.Leatherman have no one to blame but themselves for the Juice line not being more popular - they haven't made any meaningful changes to the line. They should add tweezers/toothpick/pin/pen to the scales and offer a pocket clip. Also, offer different tool combos, such as the one Yud created. I really like the Juice, it's well built and a very handy size.
-
@rdub934 said:
Great job! I don't understand why LM doesn't produce more variations on the Juice line.At a guess they are too expensive, for whatever reason as a result they can't compete with Vic meaning that their full potential has never been fully realized. If Vic could put the juice pliers in two 91mm frames at there normal cost I think the idea could fulfill its promise.
@sLaughterMed said:
Great job!Whats the plan with your leftovers? Another juice mod?
Not sure I don't have enough springs to make another full juice, have been thinking about a LM farmer.
-
@rdub934 said:
Leatherman have no one to blame but themselves for the Juice line not being more popular - they haven't made any meaningful changes to the line. They should add tweezers/toothpick/pin/pen to the scales and offer a pocket clip. Also, offer different tool combos, such as the one Yud created. I really like the Juice, it's well built and a very handy size.The scales on the juice just cover the skeleton of the tool, there isn't any room for any removable parts without making the tool wider. The Juice Pro however, has a plastic spacer that is used to hold a tweezers. I think there is room for more of these without widening the tool that could hold a stick pin or a tooth pick, a pen however would be a more ambitious mod, but there is some genius modders around here. I have a few other ideas for some cool juice mods, but I would need someone else to do them or have an endless supply of juices to destroy as I learn how
-
Leatherman have no one to blame but themselves for the Juice line not being more popular - they haven't made any meaningful changes to the line. They should add tweezers/toothpick/pin/pen to the scales and offer a pocket clip. Also, offer different tool combos, such as the one Yud created. I really like the Juice, it's well built and a very handy size.
The scales on the juice just cover the skeleton of the tool, there isn't any room for any removable parts without making the tool wider. The Juice Pro however, has a plastic spacer that is used to hold a tweezers. I think there is room for more of these without widening the tool that could hold a stick pin or a tooth pick, a pen however would be a more ambitious mod, but there is some genius modders around here. I have a few other ideas for some cool juice mods, but I would need someone else to do them or have an endless supply of juices to destroy as I learn how
Trust me in comparison to taking the thing apart a scale mod is easy. You just have to have the skills to cut the grooves in the scales, the bigger problem is working out what goes where.
But more to the point there is no reason that LM had to make the scales the way they did. They could of made them bigger to include scale tools or they could of added them other places. Also I don't think adding extra width to a juice is all that horrible.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login