Super Stack challenge attempt
-
@Noa Isumi said:
Day4
A trip to the parkEdit: helps if I actually attached the pic

Edit 2: dont ask me why the pics are sideways, they are right side up on my end.
???My experience is shots taken with phones suffer from that (the width-height ratio on phone cams may be different than on real cameras). What I do is, upload the file to my computer, open the image there, rotate it in any direction, save, then rotate back and save. You can do that with an app on your phone, too. I didn't compare the two files, so dunno the difference but it works, FYI...
-
Unfortunately it seems to be rotating to compensate on its own.
My early photos all turned 1/4 rotation counter clockwise. So I turned a couple 1/4 clockwise to see if It would fix it, and It did. Then i got lazy and let it do what it wanted for a few.The pic of the Monarch with the Champ+ however; I rotated 1/4 clockwise to fix and it rotated 1/2 counter clockwise when posted. So when I took it the blades where "up" I rotated so blades pointed right, and after posting it rotated on its own so blades are now pointing left. Makes one dizzy :ahhh
I am just going to leave them be from now on and to use an old line "whatever happens, happens" -
Day 9
Thursday
Is it just me or does a photo of my lunch sound a little like cheating
I really need to find something more interesting to do today.
-
Day 10 friday
More of those order cards I was cutting with the Lettermen on day 1
-
Day 11 Saturday
I finally got them. I've been putting it off for some time; I've been missing my eyeglass screwdriver for several years now. I did steal the one out of my wife's SAK, but I lost that one too. So I finally ordered some new ones
-
Day12 Saturday
Picked up a VictorinoxBantam with the Ford blue oval advertising scales. This particular one has no lanyard ring tweezer toothpick or Victorinox shield on the scale. Figured I'd do some pics of it next to the Champion+ showing the appropriate tool comparisons given that it's only a 2 blade knife.



-
Day 13 monday
Yes it is really monday
I know I know. I said on Day 12 that it was Saturday when it was Sunday, Day11 was Saturday.
Now that I have that mix up out of the way;My saftey glasses broke. While I don't need them for work I do need them for the range. Good thing I got those eyeglass screwdrivers on Saturday. Quick disassembly, dab of construction adhesive, and reassemble when dry.


-
Some good pics
and you are almost half way there 
-
Day14 Tuesday
New AC filter, this sounds like a job for a SAK screwdriver

-
Day15
Cleaning

-
Day 16 Thursday
There is a story that goes with this frozen pizza. Many of you in the US might remember Taco pizzas in the school cafeteria being one of the better things that they served. Most of those schools or purchasing those from one of Schwan's food service labels. Schwan also owns Red Baron, so the Red Baron Mexican pizza actually tastes just like that favorite for when we were in school.
-
Day 17 Friday
New fence means a stack of old weathered wood for a beauty shot. That is if my photography skills could be called Beauty shots.
The finger is an added bonus.

-
Day18 Saturday
A co-worker of mine brought me a new toy for my collection; A lightly used CRKT Hole-in-One.So what better way to show it than nest to the SAK in today's pic.
This thing had probably the worst bur I have ever seen. It was a complete wire edge that had rolled over. Fortunately it came off with the just a couple passes with a piece of carbide.

-
Day 19 Sunday
Paper towel jam, this sounds like a job for the fish scaler.
Really I just need something pokey enough that wouldnt poke through or cut the rubber band belts inside the machine and had teeth to grip, hook and pull with.
-
I keep missing this thread somehow
Some excellent pics the last few days buddy
Along with some great uses 
-
Day 20 Monday
I posted these comparison pics in another thread a min ago. If it doesnt count let me know and I'll get another post up. Still about 19h left in Monday after all.SAK vs switchblade
/topic/67348



-
Day 21 Tuesday
Another project; this one is a spot finder. I am sure there is a technical term for a protractor sight for doing triangulation but I just call it a spot finder.
The basic idea is that the board has angles marked from the back, in this case in 5deg intervals; a front sight; and two armatures with sights attached to the rear origon point using a pin that acts as a rear sight.
You line up the front and rear sight with an object then without moving the device swing the arms so each lines up from rear sight and arm sight and gives an angle reading. Now you have 3 points of refrence to find where you are standing again.
Coupled with either a range finder or compass and you can make a diecent feature map. The more sight lines you refrence the more accurate you can be.Unfortunately this one is not finished. It still needs front and rear sight pins/screws, and assembled. There are extra lines originated from the front too, these were a mistake that are now just decorative. The last pic is a mock up with some screws I had lying around, but hopefully you get the idea.
I'm using the hook to twist mechanics wire to make the arms. They can be made of anything really, but I had a ton of this thin wire lying around. I remembered how the wire warp holders in the heads of my mother's loom were twisted and thought I'd try it for this.




-
@Noa Isumi said:
Day 21 Tuesday
Another project; this one is a spot finder. I am sure there is a technical term for a protractor sight for doing triangulation but I just call it a spot finder.
The basic idea is that the board has angles marked from the back, in this case in 5deg intervals; a front sight; and two armatures with sights attached to the rear origon point using a pin that acts as a rear sight.
You line up the front and rear sight with an object then without moving the device swing the arms so each lines up from rear sight and arm sight and gives an angle reading. Now you have 3 points of refrence to find where you are standing again.
Coupled with either a range finder or compass and you can make a diecent feature map. The more sight lines you refrence the more accurate you can be.Unfortunately this one is not finished. It still needs front and rear sight pins/screws, and assembled. There are extra lines originated from the front too, these were a mistake that are now just decorative. The last pic is a mock up with some screws I had lying around, but hopefully you get the idea.
I'm using the hook to twist mechanics wire to make the arms. They can be made of anything really, but I had a ton of this thin wire lying around. I remembered how the wire warp holders in the heads of my mother's loom were twisted and thought I'd try it for this.
Very interesting project
Great use of your SAK as well 
-
Day 22 Wednesday
Nothing special.
Just hanging out
-
Day23 Thursday
More brushing dogs with the fish scaler. This time it's Allie;she barely sheds, but she likes the camera a lot more

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login