The test.
-
This firs pic shows here the PE failed to cut. The PE section on the serrated was done at this point but the serations kept going and going. Sorry some of pics suck I'm using a broken tablet to do this.


-
I'm thinking I should do some carving and fire prep to help give an idea of outdoor survival/ Bushcraft duties. What do you guys think? What do you want me cut? Give me what you think may be real world cutting task?

-
@Kurt Misner said:
This is great information! I really appreciate your willingness to put the blades to the test; especially since sharpening serrations is not an easy task ( I think). Up until now, I didn't think I'd see much use for serrations (especially fine work). Thanks!
If you follow my instructions on page one you'll see the Vic serated blade is just as easy as a PE to sharpen.
-
Really enjoying this thread!!
-
I have a few minutes before it rains here and have really wanted to try some fire prep with both knifes. The fist pic show the difference between the two knives. On the left is the serated and PE of the Soldier on the right is the nice curl's of the PE Trekker. Clearly the PE Trekker makes better curls which usually makes easyer fire. When your using the serated blade it's very hard to get those very nice curls even when you use the back PE section. With only an 1 1/4 inch of PE it's hard to get nice curls.
One thing I have realised is that back chisle grind PE on the Soldier makes a better scraper then the Trekkers PE. Overall I would say the PE makes better fuzz sticks then the serated. Now that's not to say you can't use the serrated blade for fizz sticks it's just easier with the PE.If you are planning on using the serated blade for outdoor activities or wilderness survival. You really need to practice with it. It's not just the serations that make it a challenge but the chisle grind can take some getting use to. One of the first times I used my Soldier was to make sticks for roasting hotdogs. Not being use to the chisle grind when I went to strip the bark off the stick I ended up slicing the stick in two. I don't care how good you are at making nice perfect shavings with a PE SAK the serated chisle grind is a completely different creater and requires practice. I hope this helps some of you.
More to come.




-
Good info there

I tried out my Soldier 2008 for the first time on some bamboo stems cut the previous day. I was removing their little branches with the Soldier and I realised some things, like:
-
Not ideal for the task this knife but it can be made to work
-
I sure need to get used to how to handle this knife
-
I must be very careful when using this knife... At some point the knife slipped and went through a stem thicker than my ring finger like if it weren't there :o
-
-
I tried out my Soldier 2008 for the first time on some bamboo stems cut the previous day. I was removing their little branches with the Soldier and I realised some things, like:
-
Not ideal for the task this knife but it can be made to work
-
I sure need to get used to how to handle this knife
-
I must be very careful when using this knife... At some point the knife slipped and went through a stem thicker than my ring finger like if it weren't there :o
I completely understand what you're saying. I've been practicing with mine alot for almost two year's. I figured if I'm going to carry it I better be able use. Which is one of the reasons I started this test.

-
-
This is a great thread, thank you !
Sent from my iPhone using Tapatalk
-
BTW I'm considering getting a Swisstool Spirit XC - this is the one with the blunt-tipped serrated "butter knife", I was wondering, though, are the serrations on this knife also as good as the ones on the knives discussed earlier in this thread? Are they (relatively) easy to sharpen? Would the round sharpener on a Lansky Medic be suitable to sharpen them, or is such a sharpener not necessary (I already have a Spyderco Sharpmaker)?:

-
Vic steel is soft so if I were using the diamond coated tapered thingy on it I'd do so very lightly.
As for the Spirit's butterknife blade, it works great for it's size (but I wouldn't want to do any whittling with it
). -
Thanx much for sharing your test

-
**@Oxford **
Do yer self a HUGE favor and snap up one of these for free hand touch ups.
link: around $12 new shipped in USA
http://www.ebay.com/itm/Spyderco-Sharpener-TRIANGLE-Ceramic-File-400F1T-NEW-/321044210160?hash=item4abfb9e1f0:m:mvgqvl0wlesvyW9j8Wv7KZAor for yer all around needs, BETTER yet , grab the "Sharp Maker" kit
link: around $40 used or around $60 new shipped in USA
http://www.ebay.com/itm/SPYDERCO-TRI-ANGLE-SHARPMAKER-KNIFE-SHARPENING-KIT-/182339170850?hash=item2a7442f222:g:2eoAAOSwo4pYGKf2 -
@cali-SAK-attack said:
**@Oxford **
Do yer self a HUGE favor and snap up one of these for free hand touch ups.
link: around $12 new shipped in USA
http://www.ebay.com/itm/S...m:mvgqvl0wlesvyW9j8Wv7KZAor for yer all around needs, BETTER yet , grab the "Sharp Maker" kit
link: around $40 used or around $60 new shipped in USA
http://www.ebay.com/itm/S...42f222:g:2eoAAOSwo4pYGKf2As I said, I already have a Spyderco Sharpmaker (with just the standard two sets of rods).is this suitable for sharpening the aérations?
-
I missed the part where ya said you already have the SPYDERCO SharpMaker
:-[Yep , you are Golden my friend....... IMPO - best unit and stone material,grits,and shapes for the job. Mr. Sal Glesser made these units with Serrations in mind.

-
@cali-SAK-attack said:
I missed the part where ya said you already have the SPYDERCO SharpMaker
:-[Yep , you are Golden my friend....... IMPO - best unit and stone material,grits,and shapes for the job. Mr. Sal Glesser made these units with Serrations in mind.

How do you use it to sharpen the serrations on the Swisstool Spirit blade, do you need to use on the rod corners or with the rods flat to the blade?
-
The Victorinox Dual-Knife Sharpener (https://www.victorinox.com/global/en/Products/Swiss-Army-Knives/Accessories/Dual-Knife-Sharpener/p/4.3323) works very well on the Spirit serrations - the elliptical sharpening rod makes it easy to sharpen one entire notch at a time.
-
I missed the part where ya said you already have the SPYDERCO SharpMaker
:-[Yep , you are Golden my friend....... IMPO - best unit and stone material,grits,and shapes for the job. Mr. Sal Glesser made these units with Serrations in mind.

How do you use it to sharpen the serrations on the Swisstool Spirit blade, do you need to use on the rod corners or with the rods flat to the blade?
Serrations = on corners

found this vid on the Tube.... guy uses Sharpmaker to sharpen a serrated spirit. :D
https://www.youtube.com/watch?v=ze7UlDqCKOEAnd "THE MAN" himself
https://www.youtube.com/watch?v=5LBDnJv5B58 -
I missed the part where ya said you already have the SPYDERCO SharpMaker
:-[Yep , you are Golden my friend....... IMPO - best unit and stone material,grits,and shapes for the job. Mr. Sal Glesser made these units with Serrations in mind.

How do you use it to sharpen the serrations on the Swisstool Spirit blade, do you need to use on the rod corners or with the rods flat to the blade?
Serrations = on corners

Okay, great!
-
I updated my comment w/ vids ^^

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login