First time modding
-
Looking good. The SAK metal is really hard. I used diamond Dremil bits but it went slow regardless.
-
Well the scissors are on, but I'm not sure for how long, everything is nice and strong, but the JB weld got rubbed by the lock a bit so I'll have to sand it again. Overall I'm happy with it, best part is it was free, too. This was basically a test fit that turned out pretty nice so I'm leaving it. I have plenty of polishing and what not to do, but I want to try it out for a week or so to make sure I don't want to do anything else with it before I shine it up. Here's some pics!
<a href="http://s50.photobucket.com/user/Booba85/media/DSC01272_zpsnvobjsns.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i50.photobucket.com/albums/f310/Booba85/DSC01272_zpsnvobjsns.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>Hard to get a pic, but you can see the washers, and the JB weld. The light grey is where the rubbed happened. I think it's done rubbing, but that's another reason I'm waiting a week or so before polishing.
<a href="http://s50.photobucket.com/user/Booba85/media/DSC01274_zpscyrws7uj.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i50.photobucket.com/albums/f310/Booba85/DSC01274_zpscyrws7uj.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>Closed up:
<a href="http://s50.photobucket.com/user/Booba85/media/DSC01275_zps4ublk2kq.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i50.photobucket.com/albums/f310/Booba85/DSC01275_zps4ublk2kq.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>Opens up nicely, along with everything else. I'm very satisfied with...well, everything. It all moves very easily, I'm a happy camper for sure. Now if I could figure out if I should really go the whole Surge's jigsaw type route. Not sure if I really even would use it that much to justify the change. Also interested in that sliding hacksaw blade mod, can't find much information on that stuff, just a few pictures but nothing with the blade removed.
-
Looking good. I find having the scissors on the outside really is useful and convenient.
The Blade Exchanger for me was just because I had a Old Style Surge that was being unused. Having the hack saw blades for me is very handy. In my everyday usage I'd say more so that the wood saw. I also like that I can add the Surge file with diamond in as well.
Run it as you said and evaluate. I'm going to do a Change mod soon and for the time being I'm really thinking about what to add and subtract.
-
I have the go ahead for the surge BE, but I'm not sure if I'm up to the challenge and also not sure if I'd even use it much. I file on toolbars in lathes and whatnot at work, so I'llbe leaving the normal Wave file. Seems to work pretty good. WAY better than the Rebar file.
This is the hacksaw setup I was talking about.
/topic/64437 -
I remember that mod. Its pretty awesome but I think more than I'm ready to tackle as well. Time to give your Wave a high polish 8)


-
That looks awesome! I thought about it, but there's no way it'd stay a mirror finish for long, with much it's getting used at work and what not. I polished up the pivots and those were scratched up in 5 minutes, lol. That looks like the SAK I got the scissors from, but mine was black.
-
I decided to go with an idea just to see how it'd work and put 2 little dabs of JB weld in (thankfully) uniform spacing to help with opening. So far, it seems like it came out pretty good! I originally had my doubts, but I actually like it a lot.
<a href="http://s50.photobucket.com/user/Booba85/media/DSC01278_zpsv9zcyixx.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i50.photobucket.com/albums/f310/Booba85/DSC01278_zpsv9zcyixx.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s50.photobucket.com/user/Booba85/media/DSC01279_zpshoqpnnpu.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i50.photobucket.com/albums/f310/Booba85/DSC01279_zpshoqpnnpu.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
I figure if the initial coolness wears off I can just flick them off and sand off the remainder...it's not like I don't have to polish it anyways.
-
Well, that last long. Yesterday I went to use the scissors and they were extremely dull, so today I had a buddy sharpen them. After that I realized that the pivot was just loose (on the scissors) so I tightened it up a bit so all was well....for about 7 hours until the spring broke. SO at this point I'm going to replace the scissors with something else.
I guess the question I have is Wingman scissors or SAK scissors? I'm thinking SAK, but which model do I look for? I obviously want the biggest scissors I can get away with (for the least amount of $ of course), and from the looks of these scissors, I can get a larger pair. Thanks in advance.
-
@Booba5 said:
Well, that last long. Yesterday I went to use the scissors and they were extremely dull, so today I had a buddy sharpen them. After that I realized that the pivot was just loose (on the scissors) so I tightened it up a bit so all was well....for about 7 hours until the spring broke. SO at this point I'm going to replace the scissors with something else.I guess the question I have is Wingman scissors or SAK scissors? I'm thinking SAK, but which model do I look for? I obviously want the biggest scissors I can get away with (for the least amount of $ of course), and from the looks of these scissors, I can get a larger pair. Thanks in advance.
You should probably be fine with any 91mm Victorinox scissors so a second hand Climber is probably the cheapest way to go. The ones from Wenger (now also Victorinox) use another spring-solution that would mean a lot more work. From the design of the scissors you used they seem to be of Chinese or possibly German origin and you should find that the Swiss-made ones are much better.
-
Thanks for the info! I've found an old climber for ~$12 so that's not bad at all. I take it you think the Vic scissors are better than the Wingman scissors?
-
@Booba5 said:
Thanks for the info! I've found an old climber for ~$12 so that's not bad at all. I take it you think the Vic scissors are better than the Wingman scissors?I would say so yes, Vic scissors open wider while at the same time being more precise and having better ergonomics. On the other hand the spring is much less robust but can be replaced instead.

-
Had a pretty productive weekend, I received the SAK in the mail on Saturday, and swapped the scissors over after work. Definitely a harder metal than the old scissors, it killed every drill bit I had, and then some. I went ahead and put the JB weld dots on them, along with some on the knife. I'm wearing gloves at work 80% of the time so it makes opening and closing a lot easier. The S30v blade gets here tomorrow, and my friend will be sharpening it the day after that, so I have a few days to figure out if I like the dots on the blade or not.
Oh and I went ahead and did some polishing...came out pretty good, IMO. Eventually I'll polish up the plier heads as well. Here's some pics!
<a href="https://flic.kr/p/QBFmLw" target="_blank" rel="noopener noreferrer"><img src="https://c1.staticflickr.com/1/519/31908881454_870d45b4b1_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>DSC01302 by Scooby Walker, on Flickr<a href="https://flic.kr/p/QBFmA1" target="_blank" rel="noopener noreferrer"><img src="https://c1.staticflickr.com/1/468/31908880844_fe6dd5cdf4_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>DSC01300 by Scooby Walker, on Flickr
<a href="https://flic.kr/p/QBFmej" target="_blank" rel="noopener noreferrer"><img src="https://c1.staticflickr.com/1/309/31908879644_b5309dc940_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>DSC01293 by Scooby Walker, on Flickr
<a href="https://flic.kr/p/QBFmrd" target="_blank" rel="noopener noreferrer"><img src="https://c1.staticflickr.com/6/5725/31908880334_972af3f124_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>DSC01298 by Scooby Walker, on Flickr
-
Shiny!
I like the JB Weld dots. very creative way of creating more purchase on the tools.
-
Looks great

-
Thanks guys, I think it turned out great! I went ahead and polished up the plier heads, There were a few dings that didn't come out, but nothing too major. I know it'll end up rubbing when I close, but that'll clean up easily and eventually it'll stop rubbing. This stuff is really addicting, I'll tell ya.
<a href="https://flic.kr/p/QBUVB5" target="_blank" rel="noopener noreferrer"><img src="https://c1.staticflickr.com/1/453/31911528374_f43c0d1b3d_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>DSC01307 by Scooby Walker, on Flickr
-
Great job !

-
Wow
Nice job on that Wave :o

-
Looks good!
I bought me a Wave, Rebar, and Wingman off of eBay as well, just haven't had time to do the mod yet. The more I have used my Surge with the replaceable wire cutters, the more I miss having the original head. The wire cutters just don't cut stranded wire that well and I save nail head and screw cutting for my linemans or a sawzaw. Think the original Wave head may stay. I plan on the wingman Scissors, 3D screwdriver from the Rebar and I think I will ditch the eyeglass screwdriver for a larger one. Scissors may go in the Rebar or possibly my Crunch! I got a pocket clip too. I hope to carry it when I'm not at work. -
Sounds like a plan! I have yet to cut any wiring with my Wave, but the chain link fencing I was cutting through was no problem at all. I ended up pulling the pliers out again and polishing them once more, I wasn't satisfied with the sides at all. Ironically, the sides took longer than everything else I have done...combined.
Anyways, S30v came in today, my buddy won't be able to get to sharpening it until the weekend, so I just went ahead and installed it now. I also had my wife line the inside of my sheath with microfiber, so that's pretty cool. Here's a pic of the new blade. I'll do the JB weld dots after sharpening. Since I was done with the 420HC blade I went ahead and popped the JB weld dots off of it to see how hard removal was...and it was cake. Good news to me since I might get sick of them on the S30v blade and it'll be nice to just pop them off. Ok, enough rambling...pic:
<a href="https://flic.kr/p/RSA8sm" target="_blank" rel="noopener noreferrer"><img src="https://c1.staticflickr.com/1/531/32733965316_73baaf39cf_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>DSC01321 by Scooby Walker, on Flickr
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login