Too Sharp?
-
Being off from work for a few weeks has given me some free time to do some tool maintenance, so I decided to sharpen my Cold Steel American Lawman (AUS 8 Steel) from paper sharp to hair popping sharp.
I’m still old school and use my cheapo Harbor Freight diamond stones for really dull edges and 1000 & 6000 grit whetstones I picked up when I was in Japan for work.
The only place for me to test the sharpness was my disgustingly hairy legs. So now I have landing strips on my legs.
Anyway I’ve always resisted doing this to my AL. Compared to my Delica it’s a much thicker blade and the AL is my go to blade for semi heavy duty work like popping zip ties and cutting tubing. I love the Delica but I use it for office carry or food cutting only. I get a less grip on the handles and not sure what would happen if I used it on zip ties. My AL has survived light prying duties as well.
I love the AL, I break down once in a while and buy a new knife with better steel, but keep coming back to the AL.
Sorry for the wandering thread, but I’m wondering if our edged experts in the forum keep their knives exceedingly sharp or prefer their knives to be less sharp?
-
I like to keep mine sharp enough ;)
-
My preferred level of sharpness :)
Disclaimer: I'm insane

-
I also like all my blades crazy sharp. I really like giving the bevels a good high polish too. I'm not sure when this happened but I can tell you from my many years in the kitchen as a chef I'd also keep all my knives exceedingly sharp.
-
Thanks for the replies guys! Yeah I gotta admit my first day with my knife this sharp has been fun. Couple of deliveries came in today and cutting open those padded envelopes was like cutting through butter compared to before.
When I get to “abusing” the edge a bit I’ll see how the AL takes it and decide if I like it this sharp.
I’m a bit of a nervous Nellie on this as I’m not an expert on sharpening so I only know 1 edge type I can place on the knife. If this was a kitchen knife I wouldn’t have any hesitation.
That was a crazy pic by the way, what was that smoky S? Blowing cigar smoke? 👌
-
I like a good sharp knife. It does not have the split hair or cut tissue paper.
-
I've tried polished edges, it does make the edge look shinny 8) but I gave it up pretty quick. The edge didn't seem to hold up as well for cardboard, wood, zip ties or other hard or abrasive cuts.
Steels like AUS-8, 1095 get done with a 320 or 600 grit aluminum oxide stone.
For higher carbide steels like 154CM & D2 I use a 600 silicon carbide stone.
High carbide, vanadium steels like S30V & M390 get special attention. I relieve the edge to 17 per side then a 20 micro bevel with a 1500 diamond plate. -
I just keep mine sharp enough to cut hot butter.
-
@OldBoy2016 said:
That was a crazy pic by the way, what was that smoky S? Blowing cigar smoke? 👌that's a whittled hair (meaning the edge that did that was so sharp to take shaves off a single human hair)

Extreme sharpness :ahhh -
That was a crazy pic by the way, what was that smoky S? Blowing cigar smoke? 👌
that's a whittled hair (meaning the edge that did that was so sharp to take shaves off a single human hair)

Extreme sharpness :ahhhMad skills!
-
@Dean51 said:
I've tried polished edges, it does make the edge look shinny 8) but I gave it up pretty quick. The edge didn't seem to hold up as well for cardboard, wood, zip ties or other hard or abrasive cuts.Yeah that’s what was stopping me from doing this before. Nice to know there are real world experiences in this. I guess I’ll see what happens with my Cold Steel. Hopefully the edge won’t roll too bad.
-
That was a crazy pic by the way, what was that smoky S? Blowing cigar smoke? 👌
that's a whittled hair (meaning the edge that did that was so sharp to take shaves off a single human hair)

Extreme sharpness :ahhhMad skills!
I would have thought that you would need an obsidian scalpel and microscope to do that. :ahhh
Mad skills doesn't do it justice. 8) -
Having an edge like that is really fun and great for detail work but not so good if you slip and cut yourself :ahhh
-
My benchmark is to smoothly and slowly push cut receipt paper. If it can do that it can slice through food packaging without ripping it.
-
I've tried polished edges, it does make the edge look shinny 8) but I gave it up pretty quick. The edge didn't seem to hold up as well for cardboard, wood, zip ties or other hard or abrasive cuts.
Yeah that’s what was stopping me from doing this before. Nice to know there are real world experiences in this. I guess I’ll see what happens with my Cold Steel. Hopefully the edge won’t roll too bad.
A polished edge should not roll any more than a toothier edge at the same angle.
If you make the edge angle too acute then steels like AUS-8 will roll and steels like S30V will micro chip. -
I've tried polished edges, it does make the edge look shinny 8) but I gave it up pretty quick. The edge didn't seem to hold up as well for cardboard, wood, zip ties or other hard or abrasive cuts.
Yeah that’s what was stopping me from doing this before. Nice to know there are real world experiences in this. I guess I’ll see what happens with my Cold Steel. Hopefully the edge won’t roll too bad.
A polished edge should not roll any more than a toothier edge at the same angle.
If you make the edge angle too acute then steels like AUS-8 will roll and steels like S30V will micro chip.Good to know!!!
-
@pomsbz said:
My benchmark is to smoothly and slowly push cut receipt paper. If it can do that it can slice through food packaging without ripping it.Don’t laugh, but I rushed over to the kitchen to look for receipts. Lol.
Looks good! I wish I have access to a better camera and show some pics.
I have noticed that I could never get the edge next to the heel as sharp as the belly edge as the American Lawman doesn’t have a sharpening notch.
So when I slice something from beginning to end it’s always a bit tougher at first then smooths out at the end.
At this sharpening rate though eventually that heel will eventually disappear. My only niggling complaint on this wonderful knife.
As a side note when they came out with the same model but CTS XHP steel I immediately bought it in case my old one gets lost. But after a few days I shelved it. For some reason I really love the AUS 8. Very forgiving when I need to fix the edge.
I notched the blade one time accidentally cutting through some sheeting and cut into a rock. Took me only 10 minutes to fix.
In the Massdrop site I waxed poetically about budget steels and mentioned innocently that the super or high end steels were not as forgiving to sharpen and got slammed on my sharpening skills as a response. Hatahhhs!!!!
Gotta love social media.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
