MLCT Crony - Need your input!
-
...

-
@donvito said:
Oppps wrong pic/tool :P you are right there could be different versions of the tool. Survival version with a magnifier, and or firesteel striker for example. Rescue model with the seat belt cutter, oxygen key, and maybe even a glass breaker.Thats a good idea donvito! I'll look into a slight redesign for a rescue model!
-Dough
-
Oppps wrong pic/tool :P you are right there could be different versions of the tool. Survival version with a magnifier, and or firesteel striker for example. Rescue model with the seat belt cutter, oxygen key, and maybe even a glass breaker.
Thats a good idea donvito! I'll look into a slight redesign for a rescue model!
-Dough
Sure thing. The different models don't have to be modified in a drastic way, the first model can be used as a platform for other versions. Other models can be made with addition, omission and/or substitution of features.
Let's keep our fingers crossed for now, and hope the first tool takes off the ground soon.
-
Well we made two steel versions of the tool today. It will take a little bit of time for us to tweak our skills in order to get the perfect grind for the prybar portion. It may end up, however, that we have to ditch the wire stripper/wire cutter function as it makes it very difficult to sharpen the inside of the prybar notch. :'( :'( It makes me very sad.... On the other hand, the steel version, which was just regular carbon steel, worked EXCELLENTLY!!! We turned several bolts with no problem, used the 1/4 hex bit driver on a few screws, and used the combo philips/flat driver on a few screws as well. Progress is very steady in the positive direction my friends, and we should have production cranking out in the next couple weeks!!!
-Dough
-
I'm having a hell of a time finding a double convex lens with an OD of approx 16mm and a decent magnification. -Dough
You didn't ask the right geek. :ahhh
Check the DCX box and put in a diameter of 16. A bit pricey, but maybe worth experimenting with.
HTH-
-steve
Lol too late, I've been there already and that would be way too much for the lens. I was looking for a lens around 2-3 bucks a pop, not 10.
Thanks for the link though! So how would everyone else feel about a Fresnel lens in place of a regular?-Dough
-
to me its all the same what kind of lence it has,as long as it can be used to make fire

-
We're throwing around the idea of nixing the magnifying glass. What would you guys like to see in that big blank space instead of a magnifying glass. We might be able to shift the 1/4" hex-driver there, and have a ball bearing insert to lock the bits in place, but I'd like to see a totally different implement, so throw you're ideas my way.
PS. The project has slowed a bit due to the end-of-the-semester crunch time. We do have a couple steel parts made up though, and we'll see what we can do about sending them out even though they are smurftier steel (not even stainless), a little smurfed up on the grinding operation (trying some things out, ended up screwing up the grinding) and have the hole for the magnifying glass. Hopefully we can get the passaround parts out before the end of the semester. -
The two round tools that spring to mind are a compass and a 360 protractor. The protractor would be very rough due to the small size however. -
Good idea!
A compass with a bubble that can be used as a level.
Or, just a bubble level would be good too.
-
I liked the magnifier idea. =(
-
-
DOH! ::)
-
We're thinking about making these changes, what do you guys think:
-Removing the magnifying glass and putting the 1/4 inch bit driver where it is
-Removing the wire guage on top and just put bumps in for aesthitics and grip
-In a spiral pattern around the 1/4" bit we'll put hte wire guages
-We're also going to put a spring loaded ball bearing into the bit driver now to keep the bit secured in while using itWhat do you guys think?]
-Dough
-
@DoughDTD said:
We're thinking about making these changes, what do you guys think:
-Removing the magnifying glass and putting the 1/4 inch bit driver where it is
-Removing the wire guage on top and just put bumps in for aesthitics and grip
-In a spiral pattern around the 1/4" bit we'll put hte wire guages
-We're also going to put a spring loaded ball bearing into the bit driver now to keep the bit secured in while using itWhat do you guys think?]
-Dough
Remove glass is a good move and putting a bb 1/4" bit driver is excellent.
Remove wire gauge off the top is another good move - I see no need for the gauge at allPerhaps drilling into the body of the tool from the rear OR making an indent where the wire gauges are now and embedding a scribe tool in the groove or hole in the rear that could be removed and used as needed to make a mark, similar to the toothpick on a SAK.
-
As a machinist I totally am in love with this project.
However, I might make my selfish needs known ... the magnifier is what I have a fetish for ... now that my four plus decades eyes are trying to read the laser etch on a #70 drill or a 4 x 40 NF tap.
However, I'm [old] wise enough to know that my selfish needs are not the mandate of the masses.
It's a shame that my EDC "eyeballs" are not enough. It's hard to make a workable lens EDC without serious cost, scratches, utility, etc.
Still ... a nice lens that can start a fire AND read the fine print might distinguish this tool from all the others.
My .02 USD or .000023 Euro equivalent.
best-
-steve
P.S. I'll buy one or two nomatter what. Nobody understands the details anymore. Or the passion. I do. My fellow mt.org brothers do. Kudos. Cheers.

-
We're thinking about making these changes, what do you guys think:
-Removing the magnifying glass and putting the 1/4 inch bit driver where it is
-Removing the wire guage on top and just put bumps in for aesthitics and grip
-In a spiral pattern around the 1/4" bit we'll put hte wire guages
-We're also going to put a spring loaded ball bearing into the bit driver now to keep the bit secured in while using itWhat do you guys think?]
-Dough
Remove glass is a good move and putting a bb 1/4" bit driver is excellent.
Remove wire gauge off the top is another good move - I see no need for the gauge at allPerhaps drilling into the body of the tool from the rear OR making an indent where the wire gauges are now and embedding a scribe tool in the groove or hole in the rear that could be removed and used as needed to make a mark, similar to the toothpick on a SAK.
+1

-
Ok guys, I wanted to bump this thread up because I need your help on some design ideas. I am going to try and heat treat the blades myself, and a 440c would be too difficult to do at home. A tool steel, however, would not be. This means were going to have a stronger tool, but the possibility of easier rusting. My question to you guys is whether or not this trade off is worth it. I want to try and do the heat treating myself to keep the costs down, and I know I can do tool steel or plain carbon steels effectively, but not the stainless. So please chime in with your input, especially if you know about the qualities of the various grades of steel. Thanks guys
-Dough
-
Tool steel or carbon steel is fine with me. You could put your own patina on it which would make it look cool and help keep the rust down.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login